Have two 10 round 308 bolt face MDT mags. Also have a 12 round. Used one season this year. Switched to AW mags. Normal marks from inserting/removing.

$100 for both 10 rounders shipped. $55 shipped each.

$60 shipped for the 12 round.

Buy all three, $145 shipped.

PP f&f.

SOLD

Impact 737R Short Action Bolt .308-BF / Right Handed/ 90 Degree

It has a few rounds on it. Kept it as a backup for spare parts or if a bolt went down during a match.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$331.23

Sorry in advance for asking something so basic but it would save me a lot of scouring the internet.

I am planning on purchasing a T3X Lite in .223 with a 22" 1:8 barrel for coyote hunting and target shooting. I have seen people get great accuracy out of T3X Lite contour barrels with a slow cadence of fire. Max mag length will be 2.44".

I am looking for a bullet and powder combination that is easy to load for (I don't want to chase the lands), is economical, and has decent terminal effects for predator control. I had initially planned to use 69gr SMKs but I am not seeing a lot of love for them online.

Bullets available to me in bulk in my price range include:

Sierre 69gr SMK
Sierra 77gr SMK
Sierra 77gr TMK
Hornady 75gr ELD-M
Hornady 73gr ELD-M

There are also lots of lighter bullets but I wasn't sure they would work as well in wind, in a 1:8, or in wind although I am far from an expert (obviously.) They include 52gr ELD-M, 55gr SMK, and 60gr TMK among others.

Powder available here is a bit limited with CFE 223 and Varget being what I think would work best. I plan to use Remington 7 1/2 primers.

I have a remage prefit barrel in 30 nosler from X caliber. Does anyone know of any place that could re contour it and re flute it? I asked X caliber and they will not do it. They also will not produce me another barrel in 30 nosler bc they do not have the reamers and they will not rent them again. I love the barrel it shoots lights out. I ordered a mcgowen in the contour I wanted, but I prefer the X caliber barrel.

S&B 4X16 PMII H58 reticle. Used $2000 + Shipping. It has scratches on it. Glass is great and is mechanically sound. What you see is what you get.

Have a question on my new sac sizing die. Got it setup like the sac sizing die setup video says. Got the decapping expander mandrel in it with a .288 bushing for my 6.5 Creedmoor. The bushing edge (facing the decapping end) is lined up about even with the top end of the expander section (closest to top of die). It sizes with extremely good neck runout (0.0005 to 0.001). However, the shoulder bump seems inconsistent (ranging from 0.000 to 0.002 bump.
Other question I have is it drags pretty hard as the brass is coming back thru the mandrel. It is not smooth. It is jerky and almost squeaks. I use plenty of Imperial Die wax inside and outside neck and on body.
Got suggestions for me?

Less than 50 rounds down the pipe, proof elevation mtr 2.0 in 223 shoots great just been sitting in the safe. $2800 shipped

I’ve got a rifle that’s got a few surface rust spots. I’d like to rattle can paint it because I don’t have any equipment to do anything more. I also have to paint the barrel so Aluma-Hyde II is out (only 300*f rated).
What’s the best option for a durable rust resistant option?

i have some experience in this area and the following is def food for thought.

Kahles 624i SKMR3 used. Minor scratches. Mechanically sound. What you see is what you get. $1500 + shipping.

Looking to sell a Jp lrp07 in 6.5 creedmoor. Jp arca on bottom. Wiebad cheek pad.
Has all the Jp options you can get.
40rnds of factory hornady through it.
$3100 plus the ride. Trades always entertained.

Here is same rifle.

Up for sale is my XLR Element 4.0 magnesium chassis. I bought this last spring for a high county Mule Deer hunt last fall. Now that the hunt is over I really don't have a need for a lite weight chassis. It worked great, makes for a lite, compact, and easy to carry package.

The chassis specs are listed below.

- Rem 700/clone inlet Short Action
- Flat Dark Earth
- Folding
- Smoke Carbon Buttstock
- Carbon Fiber grip
- Carbon Buttstock "bag rider"
- Thumb Rest
- M-lock QD sling adaptor
- "no magazine included"

This chassis in the listed configuration would cost you $1425 before shipping and taxes.

..........SOLD..........

I will post pictures tonight

​

​

​

This one has me stumped.

A friend asked me to stop by and find wall studs. I grabbed a magnet and stopped by.

SOME seems have screws (or nails) holding the drywall. The rest has no metal anywhere.

Can someone enlighten me on this one?

Apologize I know this gets talked about a bunch but things change and I like to get opinions. I’m looking for a light NRL hunter longer range hunting scope. I’m running the 5-25 mark 5 and its pretty decent , field of view is kinda meh and the turrets aren’t my favorite. I have a 4-16 ATACR but want a little more mag if possible and the reticle gets a bit thick at top end.

Looking for something under 35oz’s closer to 30 is better
20x or better would be great
Great glass and great turrets
Best possible field of view
Needs to work with LH action
Illumination preferred but not a deal breaker
Sub 4k

Does it exist??

Login to view embedded media

Well this PD cooked their own crack in a court house and sold it - cheaper than the competition. 3000 drug convictions to be overturned.

Fucking scum bags.

Great condition but decided to run a Foundation instead. $750 shipped

Payment via PayPal F&F , Venmo or Zelle

Hi guys,

Can someone help me choose between some of these actions I'm looking at for a 338LM build?

I have a 1.35'' bartlein blank ready to go, and I want to build in an AI AXSR chassis.

Was considering:

1. Defiance
2. Impact
3. BAT
4. lone peak (this is just a white labelled impact though right?)
5. surgeon
6. Terminus

I know I basically just listed all the available options lol - but I wanted to see what you guys thought. Light bolt lift, 60 degree throw, are very important to me, as well as overall build quality and precision, though that will most likely come down to who chambers the barrel I thought.

Purpose of rifle is to compete with, but I want to stay under 25 pounds and don't want to build a benchrest rifle.

Thanks.

Seems some of the "late additions" to the CR bill being worked on include fucking pay raises for Senators and the ability for members of Congress to opt out of Obamacare.Though it was the greatest healthcare ever?These fuckers just keep giving the USA the finger and stuffing their pockets.

Selling my recently picked up PSR/MSR Chassis

Brand new old buy, never used.

All hardware comes included, top rail, handguard, stock, screws.

$3200 - SOLD!!!!!

Price drop

Login to view embedded media

Banish Backcountry can, Tikka 6.5 CM, 41.5 grains H4350 143 ELDX, shot this load for 2000 rounds on this bore. Tight primer pockets no pierced primers.

I occasionally get a dirty case head and my bolt face gets really dirty when shooting a string suppressed. Is this caused by a dirty can?

Selling my manners eh1 for a rem 700 sa. It has been fully pillar bedded for a thick recoil lug but any good smith can open it up for any 700 short just about. Contoured for a proof sendero and comes with flush cups, a 419 mini arca, a front pic rail, and a savage threadworks stock pack. Also coming with full hawkins dbm. It is elite tac camo but is spray painted pretty badass if I do say so myself. Nothing some acetone wouldn't fix though. Shoot me a message if you'd like pictures or have questions. Asking 750.

Just this morning alone I received notices that I am due a $3590.76 refund for an overpayment on auto insurance, a$3198.19 for an overpayment from health insurance and a 3618.43 for an overpayment by Visa. That’s over 10K today. If these refunds keep coming in, I’m gonna have the home of my dreams and all the trimmings.

I have a Tac Ops Tango51 in excellent condition.

Kreiger barrel 20” w/1:10 twist, threaded 9/16-24 TPI w/thread protector.

260 rounds fired. Scope and rings not included.

$hipped to your FFL in CONUS, buyer pays for any insurance.

Please PM if you have any questions.

Hello everyone,
unfortunately life circumstance is requiring me to sell this rifle. I have an Accuracy International AT-LE, it was purchased from milehighshooting and was on the first shipment of AT-LEs to come to the states when they released. This specific one is serialized with a 2018 AT action. With that said, they never engraved it as an AT-LE, I don't think that came until a little bit later but whatever, it's an AT with an AX folding stock added from the factory. With it I have a Vortex Razor HD AMG 6-24x50 mounted with a spuhr 3602, on top of the AI high pic-rail. The heights were set up that way to throw on a bridge and run a pvs-30. This will not come with the bridge.
Additionally, I will add the Atlas CAL bipod with a RRS arca rail as seen in the pictures. It has the original AI 20" 308 barrel, and a proof research 24" stainless 6mm creedmoor barrel. The 308 barrel has around 600 rounds on it, and the 6 creed barrel has approximately 700 rounds on it. Admittedly I didn't keep the best track of how many rounds are on the barrels so those are just approximations. I had other 6mil and 308 barrels I practiced with which is the reason for the lower round counts on these ones. I'm wanting to sell this as a full package priced at $7000. I'm not in a hurry to sell, and if circumstances change before finding a suitable buyer I'll remove the post and not sell it.

To summarize:
AI AT-LE
-20" AI 308 barrel with TBAC SR Brake
-24" Stainless 6mm Creedmoor Proof Research barrel with TBAC SR Brake
-RRS Arca swiss dovetail mounting plate
-Atlas CAL bipod
-Vortex Razor HD AMG 6-24x50
-Spuhr 3602 30mm 20moa mount
-1 AI AW mag.

I have a couple of pics attached from various outings, I can add other pics later.
If you are interested you can message me on here and we can discuss payment methods. For whatever reason you are local to Eastern Washington (Spokane area) we could do a face to face, otherwise I don't mind shipping it to an FFL. I've only ever lugged this around in soft cases, so I can probably pick up a knockoff pelican Apache brand case from harbor freight to ship it in for an extra cost.

Looking to sell my qdt v2. Got a cert for a leofoto and no longer need this one. Have loved it to death and it has been a loyal trusty companion for 2 years now. Has some minor wear and tear but nothing out of the ordinary for a match tripod. Asking 400$.