Filter

Accessories Do you have a terminus zues in a Grayboe pheonix? If so you need this

Someone out there has to have a setup close to this 😂 SA zues in a Grayboe pheonix 2.0. Had this made and I never use it. It’s pretty slick so I thought I’d see if someone out there happened to have a similar set up.
Holds 2 bolts and 2 24” barrels, room for a can, mags and other accessories as well. You’ll likely need to trim it for your scope. Custom made by “GunFoam”, Fits a vault 700. This is for foam insert only. Looking to get $125 TYD, I believe I paid $225. $250 for the vault 700 and foam
IMG_6320.png

Optics WTS- Trijicon 4.5-30 FFP Mil

Recently received this scope brand new. Mounted, shot 6 rounds and realized I’m probably not going to use it and my brakes and shocks are smoked on my truck.

The glass is phenomenal. Pass it on to someone who will appreciate it. Currently in some Hawkins 34mm rings(lights, 1.27” H) which are included. Come with original everything, tenebrex and sunshade. Will update pics tomorrow.

$1500 shipped via Venmo or Zelle.
  • Like
Reactions: Hgrubbs22

Firearms LMT MWS 16” 308 OG quad rail factory gun. 308/762 BDC Trijicon ACOG

Like new 16” 308 chrome lined LMT MWS quad rail upper. Complete factory gun with the factory torque wrench and 2 new Pmags. Round count is under 500.

2450

Trijicon ACOG 308/762 BDC tritium is very faint light but the etched reticle is fine. Very light use on this old work horse.

500

Package deal 2650

Attachments

  • IMG_3543.jpeg
    IMG_3543.jpeg
    2.7 MB · Views: 100
  • IMG_3542.jpeg
    IMG_3542.jpeg
    2.6 MB · Views: 98
  • IMG_3544.jpeg
    IMG_3544.jpeg
    2.7 MB · Views: 80
  • IMG_3545.jpeg
    IMG_3545.jpeg
    2.6 MB · Views: 94

SOLD ZCO 5-27 w/spuhr mount

Selling ZCO 5-27 mpct2 with sp6001 spuhr mount. Has some scuffs due to wear. Just got it back from ZCO and they checked it out and upgraded the elevation turret to non-locking. ZCO gave it a clean bill of health. Won’t sell the mount until the scope sells. Asking 3,600 shipped.

Attachments

  • IMG_9487.jpeg
    3.9 MB · Views: 72
  • IMG_9486.jpeg
    4 MB · Views: 50
  • IMG_9488.jpeg
    IMG_9488.jpeg
    1.5 MB · Views: 31

SOLD Vudoo V-22 Gen 2 20” Ace MTU Foundation

Recently re-acquired this rifle back after selling to my buddy as a back up for his Gen 1. Likely has less than 3k rounds since I didn’t shoot it a whole lot, and neither did he. 20” MTU Ace barrel threaded 1/2x28 with thread protector, 90° action, will come with a Bix n Andy Tacsport single stage trigger.

Foundation Centurion purchased from a user here. Fits both Rim X and Vudoo as confirmed by Foundation. It is the light fill. Has some silicone residue in the holes in the forend as the previous owner had weights in them. Hawkins M5 DBM with the long latch installed for feeding. Full length aluminum arca rail. 12rd aluminum magazine.

Prefer to sell as package but if I have a buyer for the barreled action and the stock, will part out that way too.

Whole rifle minus optic rings and suppressor: 2400 shipped

Barreled action with magazine and trigger: 1500 shipped

Foundation with bottom metal and arca rail: 950 shipped.


If you are interested in the whole rifle with the K318i, I can cut a deal on that too.

Open to offers.

Attachments

  • IMG_1403.jpeg
    IMG_1403.jpeg
    6.1 MB · Views: 138
  • IMG_1404.jpeg
    IMG_1404.jpeg
    5.5 MB · Views: 135

Is this scope clearence to tight?

I have a Christensen arms mpr Competition rifle in 308. Bought it today and slapped a scope on it that didn't have a home (votex viper pst 2) and some medium pmr rings and was ready to go for tomorrow to test it out. As I was starting to clean the rifle I noticed the objective lense barely clears. Like so close it's insane. As I looked however the barel is free floated the entire way down the stock forend and upper (rail? Idk what the hell it would be called) My question is due to the barrel not touching any of the upper and lower forend does it matter that the objective is damn near touching the upper section of the forend? Any help guys would really be greatly appreciated. Attached are a few pictures I did the best I could to get them a few minutes ago.

Attachments

  • 20250428_201826.jpg
    20250428_201826.jpg
    1.7 MB · Views: 115
  • 20250428_201831.jpg
    20250428_201831.jpg
    1.5 MB · Views: 119
  • 20250428_201805.jpg
    20250428_201805.jpg
    1.2 MB · Views: 132
  • 20250428_201817.jpg
    20250428_201817.jpg
    1.5 MB · Views: 149
  • 20250428_201738.jpg
    20250428_201738.jpg
    2.8 MB · Views: 138
  • 20250428_201905.jpg
    20250428_201905.jpg
    3.8 MB · Views: 138

Sniper's Hide 50yd Challenge Rimfire Edition 🎯

I started a new SH 100yd challenge thread HERE and was asked about a 50yd rimfire version. Idk what I'm doing but here is the target I was able to make. If you print at 100% scale the final row should print 1" diameter circles and make it a little easier to score.

Rules:

1. All Targets will be shot from a Bipod & Rear Bag

2. Enter as many times as you like

3. Post your target, scored version please.

4. ColdBore means - Your first shot of the day, no exceptions.

5. Target will be shot at 50 yards or 50 meters depending on your range.

6. Lowest score wins

7. Include a Quarter with the image of you absolutely can’t score your own target and someone will likely help you.

8. Bullet just has to break the line to be counted as in the circle

Order of Shots

1. Cold Bore Shot; +1 on first target
•2 Shots touching center dot, 0 points,
•2 shots on target 1 point
•1 shot on target 2 point
•miss the circle with both shots 3 points

2. Zero Target to fine tune your group.
•5 shots at this target IF you need it. NOT PART OF THE FINAL SCORE.

3. 1st Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 points

4. 2nd Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 point

5. 3rd Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 point

6. Three Remaining Targets - 5 Shots EA
•Measure group size, add to score
•Groups outside the circle add 1 point to group average (example, .5MOA group outside the circle = 1.5)
•All bullets just have to break the line to be considered "In"

Copy/Paste data below

Score:
Username:
State:
Rifle:
Caliber:
Ammo:

Lowest score wins!

Attachments

  • SH 50yd Rimfire Challenge FINAL.pdf
    632.2 KB · Views: 21

SOLD Surgeon SA 591 Repeater Action and .308 Win Barrel

Surgeon SA 591 Repeater Action and .308 Win Barrel
  • 2006 action was purchased from Surgeon, then in 2007 sent back and turned into a Scalpel
  • Barrel is Krieger #10 MTU 26” spiral fluted w/ 1-11 twist, recessed target crown
  • Cerro Coated O.D. Green
  • Shot it for approximately 2000 rounds, started another build which used the trigger and chassis
  • Been sitting in the safe for last 14 years, time to let her go
  • ships from my FFL to your FFL (lower 48)
  • Please PM for more conversation, additional pictures, and payment info

Thanks for looking
bolt installed.JPGend view 1.JPG

side 1.JPGside 2.JPGside 3.JPG

fed GMM vs LE TRU

asking here cause i got a bolt gun. it shoots GMM very well out to 600. am asking if the TRU would be an (emergency only) option for hunting. the description given is that it has superior penetration and expansion which is it's reason to exist i read. planning on saving some 308 for SHTF and just wondering about successful dual use. at one time many here were advocating GMM for deer,hogs etc;game up to about 300lbs. i never quite liked that idea except in maybe an emergency where a CNS hit was doable. i would expect the TRU to be about as accurate. ie a reliable 1 MOA out to 600,reliably take game out to say 200. anybody know anything on this?

Firearms Staccato P (USPSA Package)

Staccato P, Trijicon SRO, Double Alpha outter and inner belt,USPSA race holster, 4 magnetic magazine holders, 3 staccato magazines, 1 MBX magazine, OWB and IWB holster, adjustable Atlas flat trigger
$3,100

Buyer covers shipping from FFL to FFL

Attachments

  • 20250428_073202.jpg
    20250428_073202.jpg
    3.9 MB · Views: 133
  • 20250428_073213.jpg
    20250428_073213.jpg
    6.1 MB · Views: 129
  • 20250428_073226.jpg
    20250428_073226.jpg
    5.8 MB · Views: 126

Rifle Scopes March 5-42 Gen 2 PRS Edition

Long post if you care to read

Summary = This thing is freaking rocks 🤙

I had the privilege of testing the new March 5-42 Gen 2 PRS edition over the weekend, and I wanted to share my experience with you. Upon arrival at TX Precision for a train-up day, I was immediately handed the March PRS Gen II for evaluation. My initial impressions were overwhelmingly positive.

I decided I would mount this scope in a spare mount I had with me. After ensuring my zero with my existing optic was accurate, I encountered significant mirage issues due to the conditions of the day. This is where the March PRS Gen 2 truly stood out. Upon comparing it side by side with my current setup, the difference was night and day. The March scope cut through the mirage effortlessly, even at full power, which was a game-changer for me. In a move I would normally consider too risky, especially before a match, I decided to switch my perfectly zeroed optic for the March.

Remarkably, it only took two shots to re-zero. The real test came when I aimed at a target approximately 775 yards away. Despite the challenging conditions and my initial apprehension, the clarity and performance of the March PRS Gen 2 were undeniable. NO WAY would I have been able to see exactly where I was hitting with my previous optic in that mirage without freshly painted targets. The March made this as if you were shooting in perfect conditions on a partially cloudy day. To say I am impressed is an understatement.

In summary, the March PRS Gen 2 exceeded my expectations in every aspect. Its ability to perform under challenging conditions has made a significant impression on me. The field of view and real usable magnification range is second to none. It's everything you want in a scope and nothing you don't need. From the reticle (FML-WBR) to the markable turrets (no more stickers that dont line up), this thing is a home run! I watched more bullets hit targets than ever before, especially given the conditions we were faced with over the weekend.

If you don't know who March is... You will! I expect this scope will take over a huge portion of the PRS market. You don't have to take my word for it. Next stop is the OKIE SHOWDOWN. Find me and get behind it... Seeing is believing!!!

This is going to be a game changer for you rimfire guys too… The clarity of this scope is unmatched!

Attachments

  • IMG_9644.jpeg
    IMG_9644.jpeg
    3.2 MB · Views: 134
  • IMG_9646.jpeg
    IMG_9646.jpeg
    2.4 MB · Views: 130

6 Days After Celebrating '100% Renewable Power', Spain Blames "Rare Atmospheric Phenomenon" For Nation's Largest Blackout In History

Progress when you move from grids that were stable over decades to Rolling blackout being the norm due to whole renevables not not being backed by alternative Gas,Coal,Nuclear to provide inertia to the system

6 Days After Celebrating '100% Renewable Power', Spain Blames "Rare Atmospheric Phenomenon" For Nation's Largest Blackout In History​

Update (1126ET): Portugal's grid operator, REN (Rede Eléctrica Nacional), claimed that the massive power outage affecting Portugal and Spain was sparked by a "rare atmospheric phenomenon," specifically "extreme temperature variations" in the Spanish electricity grid.


Login to view embedded media

Optics SOLD Vortex Gen3 Razor 6-36 in Badger Mount and 1-10 with Reptilia Mount

Vortex Gen 3 Razor 6-36 in mils. Includes turret spacer and sun shade. No box or throw lever.

Badger C1 Max Mount 34mm 1.3 with the level, data card and diving board set up

Package price SOLD

Vortex Gen 3 Razor 1-10 in mils includes everything in the box. Never mounted $1750

Reptilia 34mm 1.54 mount $230

Package price SOLD

Will not sell mounts before scopes. Possible partial trades on the following:
36mm badger mounts
MK5 3.6-18/2-10 with PR2/CMR reticles
LMT MWS 12.5 M-lok upper

Attachments

  • IMG_9012.jpeg
    IMG_9012.jpeg
    2.4 MB · Views: 60
  • IMG_9011.jpeg
    IMG_9011.jpeg
    2.4 MB · Views: 59
  • IMG_9013.jpeg
    IMG_9013.jpeg
    1.9 MB · Views: 53
  • IMG_9014.jpeg
    IMG_9014.jpeg
    3.5 MB · Views: 46
  • IMG_9015.jpeg
    IMG_9015.jpeg
    1.8 MB · Views: 57

BadgeCam from the Weezer Wife Shooting

Login to view embedded media

That's WILD as hell... they became completely distracted from their jobs because they thought they could collect a Sport Kill off a mom defending her home from... the actual Criminals they were pursuing!

Ma'am, PUT THE GUN DOWN... OK?

HEY! She just pointed it! Not at us, but she just LIFTED IT UP!!!

These guys just wanted to kill an American for any possible reason, and were wracking their brains harder than they ever thought about anything in their lives to get to the top of the escalation ladder and use lethal force.

They wanted to KILL- and any target they came across was A-OK, and any outcome.... including allowing the Criminals they were pursuing to escape... was just fine with them.

They claim she shot at them, but why were they pointing their weapons at her, and who shot first?

I know we're heading in the opposite direction, but an example needs to be made... and we should start NOW with these dirtbags.

And also- on the efficacy of pistols in gunfighting, she got shot in the shoulder and walked off, only to be apprehended much later. A 51 year old woman...