I recently purchased an Accuracy International AT rifle (serial number 23AT2****), which is supposedly made in 2023. After shooting for the first time the next day, I noticed rust had developed on the import mark portion of the receiver (see pic). I shot 20 rounds to zero in my scope recently on a rainy day (it has been raining in Northern California every weekend recently), and I wiped it down as much as I could at the range and then cased it. Several hours later, when I got home, I noticed rust spots developing.


I know rain is bad and the rust is only cosmetic, but it bothers me that a $5k rifle could behave like this. Rust is also found on the nitrocellulose certification marking and the bolt release catch (pic 2&3). Even my 80+ years old surplus military rifle is more durable than this. How could AI not consider the elements as a factor when engraving this rifle (the 2023 version, at least)?

If I remember correctly, the import marks on the AW and even earlier AT rifles were painted over with white paint or some sort of finish instead of leaving engraved bare steel letters exposed to the elements. Has anyone else experienced this issue? I’m wondering if this is covered under warranty. Many thanks!

Steen

Looks like they might need to go for rounded knives after they took all the guns

Login to view embedded media
Login to view embedded media
Mob looks like would tear the duche apart
Login to view embedded media

For sale is my 6.5 Creedmoor Tikka CTR w/ 20 in barrel, in a KRG Bravo chassis + extras for $1300. You get

Gun
Chassis
AICS KRG 10 round mag
Minimalist Spigot
Harris 6-9 inch swivel bipod
Harris to Spigot direct mount
APA Little Bastard brake

I’ve enjoyed shooting this gun out to 1000 yards. It shoots 3/4 MOA or better with Hornady Match and American Gunner. I have fired 300 rounds of Hornady factory ammo through the gun, and its performed flawlessly. Just needs optic/rings and its ready for the range.

The chassis plastic is Sako green that has been painted ODG with Aluma Hyde II. The finish is very consistent and has held up very well over the 300 rounds. I was extremely particular with my prep work. This is my third firearm sale on Snipers Hide, and I’m happy to provide references from my other buyers. I will only ship to an FFL. Buyer pays shipping from Chattanooga, TN.

Price is firm, will not part out, but I’m open to selling the firearm in the factory CTR stock. Also willing to sell the brass(300 cases) if you're interested. Happy to answer any questions!

Manners mini chassis Remington 700 short action footprint. Want to trade for a MDT acc

Full power Peq15a. Barely used. Works great.

$1500 shipped.

I’ll can usually ship same day with reasonable notice.

Barely used - great shape - comes with box

Kestrel 5700 Ballistics w/ Link in Tan

$375 Shipped - Venmo or PP F&F

New LMT MWS MRP-H 15.3” Upper.

$1125 shipped.
Ships via FedEx. I can usually ship same day with enough notice.

Kahles k318i (3.5-18x50) with illuminated SKMR3 reticle and RSW. Includes the box. 2250 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-6.5 Barrel Blank or Nucleus prefit (Bartlein, Proof, etc.)
-18” Proof Research AR Barrel
-Geissele MK14 True 13”
-Garmin Xero C1 Pro Chronograph

For the last 15 years, I've been using the 6.5mm bullets/cartridges for precision rifle competitions. I've had custom rifles built for my 6.5s, heavy 26" (M24) barrels and shooting targets out to 1200m. Since last year, I've entered events with a max distance of 700m, so I decided to build a 308 Win for this 2024 season with a Proof Research CF barrel 1:10, Sendero 20" with threaded muzzle (Tikka T3X action + MDT XRS chassis). My question for those of you still running a 308 for competitions is this: what are your suggestions for bullets? Keeping in mind that it's a 20" barrel with a 1:10 twist, maximum range I'll be shooting is 700m-800m. I am asking because I've been away from the 308 for 15 years and not up to date on what is now commonly used.

FYI: Why a Proof CF barrel? I want to take it out hunting while also using it for competition. In my 6.5 Creedmoor competition rifle, I shoot the Lapua 136gr Scenar L and absolutely love it's performance and consistency. Please don't suggest other chamberings as I am dead set on the 308 and have a barrel ordered.

Thx for your input

I’m hoping some of you with some ECCO machine experience can help me out here. I have an AAC 762-SD with the 51T mount. It was my first rifle can and for its day it was a fine suppressor, but ever since I got my SiCo Omega it’s basically just been sitting in the safe. I recently changed barrels on my AI AE and decided to put the 762-SD on and try it out again. My results were less than stellar. Even after fitting the mount to the suppressor, my groups are noticeably larger with the cannon than without. For example, today when I went to the range I was seeing 1.11 minute groups with the can vs .78 minute groups without. To confirm this wasn’t a one off or a barrel specific issue, I also tried it on my 6.5CM AI and my groups were similarly larger after putting the can on.

My theory is that the main issue is in the mount. I just don’t think there’s any way to make the 51T mount as precise and repeatable as newer mounting systems, even after fitting. To solve this and not have to buy a new suppressor, I am considering having Ecco machine swap the factory 51T interface for the universal 1.375-24 interface. I believe* that would allow me to use an ASR mount as well as the direct thread mount that came with my Omega, which is currently gathering dust in its box. Before I commit to this though, I’d like to get some information and advice from those of who’ve already walked this path. My main questions are thus -

1: Am I correct in assuming that the most likely issue with my accuracy is the mount and not the actual suppressor itself? Have those of you who’ve gone this route with a 762-SD or similar AAC can seen appreciable increases in accuracy and precision after going to an ASR (or similar, modern QD system) or direct thread mount, or is the actual suppressor and it’s design at issue here?

2: Am I correct in assuming that my SiCo Omega direct thread adapter will work with an AAC can that’s been converted to the 1.375-24 interface?

3: since I’d like to keep this suppressor QD compatible, is the ASR mount an acceptable way to go for a precision rifle can?

4: For those of you who have done this or something similar, what were your general thoughts on the experience and results? Anyone other than Ecco worth looking at?

I’d love to hear feedback on any part of my diagnosis or my plan. I’d aLao appreciate any info on other’s experiences who have tried this or something similar in the past. I should also add; I am aware that there is an upgrade program through AAC that would basically turn this thing into a Ranger 7, however it’s much more expensive and I really, really like the tone and look of the old school AAC cans, especially on an AI rifle. I’d like to keep that style and tone if possible. Thank you all in advance!

Private property, liberty, 1A, & guns. Fuck yeah!

Selling my Tangent Theta 5-25 with the Gen3XR reticle. The scope is in really good working condition with a cosmetic rash imperfection shown in the pictures by the diopter due to a mishap 1.5 years ago. I used it in my primary match gun. Selling due needing cash. The glass is perfect. Comes with box, caps, sunshade and manual. Price is $3650 shipped. No trades.

22 boxes of Hornady 140 ELD-M

2 separate lots of ammo. Prefer to keep them together by lot.

12 boxes, lot 1: $380 shipped

10 boxes, lot 2: $320 shipped

Or $650 for both lots.

Please discuss how this could have been better.

Login to view embedded media

What's the groups thought of using zelle for payment instead of paypal? Looking to start selling some spare junk and avoiding using paypal if I can.

Broke out the Fuji for a walk today….

Some randos…

My buddy Gent out of focus.

Login to view embedded media



Login to view embedded media

Selling a mint Mark 4 spotter with TMR reticle, badger slick, badger protective lens cover, and badger multi cam cover. The RMR is not included.

$### shipped via FedEx.

I have a 18’ compass lake built AR 15 CLE chamber. I’ve been shooting mostly 77smks or Berger OTM’s over varget no issues. I tried some 77smks over h4895. Started at 23.4, 23.8 and 24.2 in REM brass annealed on an amp trickled in with my v3, small base die and brass fit the chamber gauge perfectly. 2.255 oal. So weird thing is the h4895 load was super fast, Labradar reading 2940 on the top end charges. The h4895 load wouldn’t eject completely most times, when it did it wouldn’t load the next round or lock back on the empty mag. Switching over to the same exact setup with the exception of varget instead of h4895 and the rifle functions perfectly, brass in a neat little pile at 2’ o’clock and mag locks back. Used two different pmags same issue with both, no function with the h4895 load and perfect function with the varget load. The varget load showed my normal velocity 2700 as always, good accuracy for both loads. Just find it interesting. No idea why the 4895 load won’t function in the rifle

BugEye scope magnifier. Designed for 34mm scope tubes. Magnifier is easy on/off. Large field of view, approx. 4x magnification, fully adjustable. Excellent condition, comes with original box, all included items, instructions.

I have (2) of these for sale.

Not looking for trades. $SOLD shipped to CONUS – PayPal Friends & Family only.

Login to view embedded media
And also a cop- and every cop at this scene is also in the outlaw MC - and they stand by and watch as he threaten people and destroys property and breaks and enters a private residence.

And he clearly states that “no one here will arrest me” and of course he was correct. At least these guy dont keep their criminal gang activity a secret, it’s right out in the open - gang colors and all.

Bergara B14R 22LR

• Option 1 - MDT LSS XL GEN 2, NV Hood and MDT SCS = $1500 over $1780 in it
• Option 2 - MDT LSS in FDE w MDT SCS = $1400 over $1550 in it
• Option 3 - MDT LSS XL GEN 2 w NV Hood and Magpul PRS Lite Stock = $1300 over $1530 in it
• Option 4 - MDT LSS in FDE w Magpul PRS Lite stock = $1200 over $1300 in it
• Option 5 - all of it over $2280 in it for $1950 -- That's the B14R barreled action in MDT LSS XL Gen 2 Chassis w MDT SCS Stock as seen and a MDT LSS Chassis w Magpul PRS Lite Stock and Hardware also includes the NV Hood and accessories as pictured

Chassis Only Options
Both Rem 700 SA

• MDT LSS FDE Chassis w PRS lite stock (no barreled action) - $400
• 
  
• MDT LSS XL gen 2 w MDT SCS, NV Hood (no barreled action) - $700

NOT selling barreled action by itself unless chassis sell first

Under 500 rounds fired
Mild wear on the black MDT but doesn't affect function

Obviously this is an FFL item so as such will go to an FFL - $20

scope is a pine ridge
No Scope or rings -$50 off whatever option

VENMO OR PAYPAL F&F

Partial Trades :

Holosun 407k/507k
Holosun AR optic

MDT FIELD STOCK or Lightweight Hunting type REM 700 SA stock

Arken EPL MIL

2011 9mm - frame, slide, barrel, grip mod full size (Commander length 4.5" preferred)

Bolt action 22LR w Ruger Mags like RUGER RPR

Selling my tab gear rear bag
$25 shipped

I'll start it off...

Seekins 34mm low .92" 1 set left $100.00

New unopened Area419 35mm medium rings 1.1" SOLD

Greyboe Terrian stockRem 700 SA bdl bottom sporter contour $300.00

Athlon Cronus BTR gen1 MOA with seekins low rings, throw lever, and sunshade(not pictured) 875.00

rcbs Brass Boss $175.00

4 3 MPA BA bolt Action mounts 35mm 0 cant 3 1.125" and 1 1.250(sold with the pic rail ring cap top)" $175.00 each

Generation 2 Annealeez Machine with all 3 sizes of wheels $SOLD


All items are priced shipped lower 48 and OBO