Any doubt that this guy is a tool of the CIA and globalists at large? I guess too many got tired of Hannity and his never come true "Tick tocks?"

As lead operative and narrative engineer on the ‘tick-tock’ effort, John Solomon has once again pushed his way to the front of the narrative engineering effort. As a genuinely glowing Solomon picks up the flag of attention, many people once again start to follow the shiny thing into the dead end of DC silos.

Click to expand...

Solomon’s primary source of information before and during Term-1 was Mark Meadows. Meadows fed Solomon information from his position in the House of Representatives, then from his position in the Trump administration.

Click to expand...

Within the information control space, when you understand how “positioning” takes place, you start to notice patterns. Solomon fits a pattern of controlled information release and tradecraft. Notice how Solomon steers the conversation back to the FBI over and over again.

Click to expand...

“If the FBI choose to _______, would you support?”… It is a repeating pattern. Once you see it, you can never return to that moment in the pantomime when you do not see it. Solomon consistently relies on structuring his reporting around FBI and DOJ activity.

Click to expand...

“Yep”, “Yep”, “Yep.” That is what you hear from a person who understands influence by stimulating the victim’s head nodding. In professional sales it is a form of cognitive affirmation. Listen for it, listen for “yep” and count how many times you hear it. There are open conversations in/around my proximity where Solomon is considered a CIA asset.

Click to expand...

Keep that in the back of your mind as you watch Solomon position himself to narrate what the FBI and DOJ are doing.

Click to expand...

Login to view embedded media

We have a handful of the MRGG rifles in stock. 20" DDC variant- PM me if you are interested!
Link:





Connor

TL3 barreled action with a 5x5 precision 6br chambered barrel with 1200 rounds. Barrel is a Bartlein 1.25 straight 5/8 muzzle and 27” $1250 and will split shipping to your FFL holder

What’s this shit that Candace Owens is saying about Macrone’s “Wife” being a man?

Login to view embedded media
Most importantly where are the fucking memes dammit?!!

If you’ve got some post them here.

Hi guys!

I'm looking at making a suppressed, subsonic only 300 Blackout. I want it to be reasonably quiet (if someone else is shooting, my shots are invisible) or whisper quiet while balancing good barrel length and can length. I don't see this gun being used past 50 yards, 75 is stretching it for what the gun's intended purpose is.

I was thinking a 5.5 inch barrel with a Surefire SOCOM300 SPS or something similar, full barrel length with can going to 14.5 inches max, aiming for 12 or so.

Has anyone got specifically decibel counts from down range as opposed to shooter's position with different lengths of barrel or cans? Any issues with dwell time, or is that a myth? I don't mind issues with sound at my position so long as down range is quieter.

Thanks for the help!

Personal opinions, Best caliber for big game at 400 plus yards. Most likely Elk.

Couple items up. Prices are TYD via discreet Venmo/PayPal. Ships USPS or UPS.

2x L3I CZ 457 13 Round Magazines - Brand New, never loaded a round. $SPF for the pair

1 Brick/500 Rounds SK Long Range Match 22LR Ammo - $SOLD

Now bring back the coca extract and we’ll
Make Coca Cola great again!!!

Sirhr

Used KRG Whiskey3 folder with angled bag rider, Rem700 sa inlet. SOLD

I am selling a Like New NightForce NXS 5.5-22x56mm with MOAR Reticle model #C434 sitting in a New Burris UniMount.

I got this on a Rifle Combo Deal that I recently purchased and I prefer the NightForce ATACR model so I will give you a Great Deal on this one.

Only $1250 Shipped for the Scope and Mount Combo.

I have been shooting SK LR, Match, Center X and ELEY team and match. Just with the supply of ammo. I am having to lot hop. What would you say you would want your ES to be for rimfire. I’m going to try to do some lot testing in the fall.

$199 shipped

Zelle, Venmo or PayPal FF or add 3%

I just bought a Huxwrx Flow 556... wanted to test these eForm4's shipping a can right to your door. Sure enough, its legit, approved in 4 days...

So i decided to build and submit a new eform 1 sbr lower for this build. And build a 11.5" BCM upper and a 12.5" Geissele upper.


Here the build specs


Lower

Spikes Tactical Spider Lower
Geissele Buffer Tube
Geissele H3 buffer/spring combo
Geissele trigger guard
Geissele Maritime bolt catch
BAD Pro Ambi Safety
Geissele lower parts kit
Magoul MOE K2+
Larue MBT- 2S Straight w/JP spring
Magpul CTR
BCM QD Endplate
Forward Controls Billet Castle Nut


Geissele Upper
12.5" Geissele chrome lined CHF barrel
9.3" Geissele SMR MK16 handguard
Geissele Super Compact gas BLOCK
Geissele Super Charging Handle
Spikes Tactical melonited gas tube
Rubber City Armory BCG
Magpul VFG


BCM Upper
11.5" BCM Chrome lined barrel
10.5" BCM MCMR MLOK Handguard
BCM 750 gas block
Spikes Tactical melonited gas tube
BCM Gunfighter Ambi charging handle
Rubber City Armory BCG
Magpul VFG

GBRS Lerna mount
Aimpoint T2

I just put some Hornady 55 FMJ-BT WC846 bulk plinking ammo through the Geissele upper today on one of my other SBR lowers to zero at 50yd and put some rounds down in.

Functioned flawlessly..... just waiting for the Huxwrx to show up in the mail then I'll start doing some testing.

I also have a 11.5" piston upper i built with a Superlative Arms piston kit that is very smooth ill be testing the Huxwrx on and comparing to these 2 uppers.


Login to view embedded media

All of the parts are brand new, never used. I put this together for this fall's backpack rifle build, but with both shoulders going down for surgery in the coming months, there's little chance it gets used. Parts list below.

Weight with CB brake and no mag at 6lbs 5oz., w/o the brake it should sit at 5lbs 11oz. Asking $OLD shipped and insured via DISCREET PP/Venmo FF/Gift or Zelle. I can add the TBAC CB .30cal brake and AccuMag 6.5PRC 3-rounder for $150 more.

• Defiance Anti-X SA Action .550 Magnum bolt
• Proof Research Carbon Fiber Prefit barrel, 22" 6.5 PRC 1:7.5 5/8-24 twist Sendero
• Trigger Tech Diamond 2-Stage PVD Black Flat Shoe
• Hawkins SA DBM5
• Manners Pro Hunter SA Micro Mini Chassis Back In Black with left side and bottom rear QD sling flush mounts
• TBAC CB Brake .30cal 5/8-24 (EXTRA $$$)
• AccuMag 3-Round 6.5PRC/.300WSM AW magazine

Hi, new here!

I was looking at a 20 inch Savage Arms 110 Trail Hunter Lite in 300 WM, and for general use, was wondering if I should put a brake or a can on it.

This gun is meant to be a mobile sniper-ish role when LARPing with friends. As realistic as I can make it for training and fun.

I'm a relatively small dude, about 130 pounds, so I was considering the brake so I could shoot it more than five times without calling it quits.

But I'm being told that a suppressor would also reduce recoil, just not as much, in addition to signature reduction.

I'm leaning towards a suppressor, but am unsure how much recoil it'll hit me with compared to a brake; I shot the same rifle with a brake a while back and it felt lighter than your average 12 gauge. I have not had the chance to shoot a suppressed bolt action in a higher caliber than 6.5 Creedmoor, and don't want to blow cash on a can just to figure out it sucks and I wasted my cash.

If I went with a brake, how many baffles are recommended? If I went suppressor, what suppressor is recommended and why? I was looking at the Surefire RC2 since the 300 SPS has some bulging issue with WM, but I want y'alls thoughts. Thanks!

I have a Badger M2013 in a MPA Matrix pro chambered in 6X47 lapua. I also have a spare 6X47L barrel with a .223 bolt and .223 trainer barrel. All barrels are Bartlein barrels and spun up by Aaron Roberts. The rifle has a trigger tech diamond trigger, atlas bipod. The scope is a Priemer Optics 5.5-25X56 Gen 2 I still have the box for it if scope is not prefered I also have a Vortex Razor Gen 2 4.7-27X56 that we can swap it out with. There is only 400 rounds on the 6X47L barrel and 24 on the other. This rifle is turn key ready to go. I also have the action wrench to change out barrels. I am asking $5,500

How’s it going folks!

Got some stuff for sale:

ZCO 5-27
MPCT-3X
10MIL NLE
Hawkins mount 1.26”
$SOLD — Shipped and Insured lower 48
Everything pristine.

MDT ACC Elite
Titanium Blue
$SOLD
Would like to meet in the Austin area,
but can ship if not.

Everything else not for sale.

Reach out with any questions.

Thanks!

Today, the first round of DOGE cuts was passed by Congress, making $9 billion in DOGE cuts permanent!

USAID loses $8 billion.

And NPR and PBS lose $1 billion.

JD Vance cast the tie-breaking vote:

I guess this is the norm? Leo's were way calm in this

Login to view embedded media

Looking to trade off my Korth Super Sport, it will come with hard case, both 9mm/357 cylinders, acro, dies, and brass. It shoots amazing but I just don't shoot revolvers much. I have around 50 rounds of 357 down the tube and about 200 9mm down the tube. Looking at 7k trading value

Sound Loans in Everett will ship it out for me so FLL to FLL

I have some new in box vector X binoculars in stock ready to ship. Use code “SH07” it may work with other items in cart as well.

Defiance Ruckus SA in 6.5CM. Proof carbon 24" barrel, EC tuner, Timney HIT trigger, MPA BA Comp SA chassis. Round count 250ish.

Catch and release, barreled action was purchased on the Hide. Decided to go another direction and buy a 6.5CM barrel for my SL setup.

Scope and rings are not included and are not for sale.


Barreled action $1750.
***SOLD*** MPA BA Comp $650.
EC tuner $150
Timney HIT $150

All prices are shipped.

WTF???


Login to view embedded media

Selling a Bartlein 25 cal 7.5 twist SS Heavy Varmint 29" blank.

So three weeks ago I get a call from PD not to far away from us. They are calling asking for help. I asked, "whats up?" Well we had our 7 dept rifles rebuilt by a gunsmith/shop all with your barrels and out of the 7.... only one shoots! That one just shoots small silly groups! I said really.... 1 out of 7 shoot? The officer says yes. Then he says... can I bring the worst two to you and have you guys look them over? I asked... didn't you call the shop that did the work and talk to them? Answer was yes and they took them back once already and had stuff fixed but they still don't shoot!

I said bring the worst two guns to me and will look them over for ya. He said thanks... the one rifle actually shoots 4moa!

So far we have fixed 4 out of the 6 rifles. They're suppose to bring the next two rifles in next week. Here are some of the things we found that where wrong.

Two rifles the bolt was hitting the back of the barrel. The other two the clearance at best was .004" which still isn't enough.

NV mounts installed backwards (yes doesn't effect accuracy but it's attn. to detail is my bitch there)

One rifle the trigger retaining pins where installed incorrectly. The pin that is suppose to be in the rear was in the front location which if there isn't enough stock clearance it would cause a fit issue between the barreled action and the stock.

One rifle actually had a burr or a piece of metal sandwiched between the recoil lug and the receiver face at the 6 o'clock position. When we took the barrel off to fix the bolt clearance and the muzzle crown... that small piece of metal actually left a small indent in the receiver face. Again goes back to paying attention to detail and what the hell your doing.

We had to fix all of the muzzle crowns on all of the first 4 rifles and rethread the muzzles.

I asked who's scope mounts are these? He said they where custom made! I'll get back to this further down in the reading but the mounts all had a negative MOA taper to them. Also two of the rifles the front screw was hitting the barrel threads. So we had a couple of decent not really expensive EGW 20moa bases and installed them for the first two rifles and ordered two more for the 2nd batch of guns. He said they knew they had issues with the mounts and had to use a shim on one of the rifles so they could get it on paper and have some adjustment to the scope. No more shims needed.

I would say not including range time or ammo cost... just in terms of inspection time and repair time we are averaging 7 hours for each pair of rifles.

When we got the first two rifles reworked (we actually didn't notice at first the scope mounts where messed up) I took them out to my range to test fire them. Figured better test fire them before we give them back to make sure they shoot good! I didn't want to mess with they're scopes and the focus etc... so I mounted my 8-32NXS scope. Scope was on a previous Rem. 700 in 308win so I skipped bore sighting it. That was a mistake! I sent the first round down range and no impact on the target. Said... crap... then I went to a 50 yard target... still no impact! WTF! So I pull the bolt out and to bore sight it had to remove the cheek piece as well. I look down the bore and the gun is pointed like 6" (best guess) below the target at 50 yards. So I start cranking on the elevation knob while looking down the bore and I see the cross hair coming up and then boom... the elevation knob stopped! I max'd out the adjustment and it's still really low on the target. I'm like WTF!!! So I pick the gun up and look at it from the side. That's when I noticed the neg. MOA on the scope mount. So with the scope max'd out at 65moa for travel... I held on the 18moa hash mark of the reticle and that gave me a .75" above center on the target for a zero. That's how I shot the first gun. Needed a total of 83moa just to be in the center of the target at a 100 yards. Then I/we changed all they're mounts out for something that was proper.

I did bring up with the Officer... I said, "hey were not bitching at all but we're not getting paid for any of this and I'll go on a limb and say you guys blew your budget request to get these 7 guns rebuilt but the next time I'm cruising thru your town headed to Marty's Pizza for dinner and you guys pull me over for speeding... tell your boss to give me a get out of jail free card please. He said... got ya covered!

I know the shop that did the work and bent isn't the word for it. As we worked on the first two guns I was actually pacing the floor at one point in time I was so mad.

Enjoy some of the pic's I took.

Later, Frank
Bartlein Barrels