Did a range day a while back with the "shoot-clean-rinse-repeat" on a new 300-WM barrel for my MPA chassis/action. Took it out yesterday to run 40 rounds through it and see what I got. First 20 rounds were about 2-to-3 MOA and SD's of 15.2 with average velocity of 2873 ... second 20 rounds were about 1.5 MOA and SD's of right around 10.0 with average velocity right around 2900 ... right where I want it. Wondering if the next 20 will go 1 MOA and give me single-digit SD's. It's kind of fun to watch a barrel literally "settle down" ... 20 rounds at a time. Getting it ready for local matches starting later this month.

I shot some SIG Elite Hunter 130 grain tipped ammo in my SP10. This factory ammo has nickel plated cases. It shot real well and feeds well. Is there any downside to running nickel plated cases through an AR?

I have a 6.5 creedmoor built by Billy tierce in Mississippi . The gun absolutely shot like a laser from day one . I literally brought it home and did the Krieger break in and after researching loads I loaded a few 140 bergers with 42 grains h4350 and shot a ragged hole with them right away . Only has 60 rounds on it .
Krieger #13 rem varmint 1:8 28”
Trued blue printed Remington action
HS precision stock
Timney Calvin elite trigger set at 1lb
Custom cerakote
Scope and mounts not included in this price as I have already sold the scope and mounts .
$1275 !!!! Buys this gun . If anybody says they can go buy a store bought gun and shoot anywhere close with this gun I will gladly take them up with a stiff bet .
I will be glad to answer any questions you may have and try to send as many pics as you’d like . I have tried to add more pics but it’s giving me heck saying file size too big ! $1275 gets it like I said

A good friend past away a few years ago and I’m helping his family sell some of his rifles.
1. Underground Skunkworks in .338 LM. $4300 Now $3600

2. Surgeon Scalpel in 6.5CM threaded barrel w/protector. $3800 Now $3400

3. Arrow Dynamics Precision Weapon Systems 6.5CM $3800 Now $3400

4. Howa mini 6.5 Grendel 20" in MDT LSS folding chassis/Magpul furniture. Barreled action has New coating in KG GearKote. $700 Nw $650 SOLD SOLD SOLD SOLD


I recently shot the PWS 6.5cm the other day with factory Hornady ammo, and was shooting 1/2" groups. Unknown round count on these but I know they were not shot very much as my friend was really sick the past 7-8 years before he passed. I build precision rifles for a living and will completely disassemble every rifle and function check before I sell them. Firearms will ship from my FFL to the dealer of your choice. Prices don’t include shipping/ins. Some prices are OBO so make me an offer.

Do tell what people with mortgages will do when their Ins company cancels them and the mortgage holder says you either find Ins or pay it off now.

Oh wait we can provide Ins for just a "Little" more than you were paying, what will it be?

Forget the link sorry,

LNIB Anschutz 1710 Kelbly’s Edition 22lr. Has every single option offered by the Anschutz North America Custom Shop with receipt and certificate. Murphy 40moa rail, full length arca, match 2 stage trigger at 3oz/3oz. Bolt tuned, ignition tuned, mags tuned, ejectors tuned, and epoxy bedded action. Feeds, fires, and ejects flawlessly. 2 10rd mags. One with +2 extension. Single shot adapter. Includes custom Palma sights as well for open sight matches ($$$). No expense spared. Original owner. Box and all documentation. Scope, bipod, and tuner not included.

$3500 plus actual shipping FFL TO FFL. Will drive a couple hours from Paducah, KY to facilitate face to face transaction. Will provide any pics or vids as requested. Just let me know what you want to see.

Only trades I’d consider would be a CZ457 MTR, Tikka T3, or Vudoo action/barreled action plus cash.

Scammers are contacting people under my name offering goods for sale. I am offering no goods to anyone.

either did or did not make it long with you?

Hi
Could any US owners of the Tangent 7-35 please advise when looking through the scope at 35x as to how many mils from Reticle centre of the outer edge are visible.

Just want to compare to our "Aussie" version..

Thanks.

Hello all. Long time shooter and member here. I recently joined a range that hosts PRS matches and I am curious about participating. I am of course going to speak to them, but we have such a wide range of info here.
I am a double amputee, left arm above elbow, right leg above knee. I am extremely active and mobile, I build my chairs and can go pretty much anywhere. I would like opinions and experiences regarding my participation. From a shooting and safety standpoint I would be fine, but I definitely cannot move/relocate as quickly as most competitors, which clearly would impact actually competing due to the time constraints. I'm more interested in the participation than placing, but I also don't want to hold up other shooters during a match. What do you guys think?

I have only done this once, and not recently. But I've read some reports. List your answer for the first thing the maker (barrel maker or gunsmith does), and explain your interpretation/inferences. I'll go first.

First, they clean the shit out of it....

And I infer this to mean that, despite all the controversy about cleaning, they want to get the barrel back as close to an original state as they can before they evaluate further, and moreover that cleaning a barrel matters.....

discuss...

....also, would be delighted to hear some "maker" (barrel maker or gunsmith) stories too

Lone peak razor action with the lone peak pinned rail
26" krieger .237" 4 groove heavy varmint
6-Dasher with .104 freebore chambered by Joe Walls
APA Fat Bastard included.
438 rounds down it.

Reduced to $1650 takes it.

I'm posting for a friend. If you are interested let me know and I'll get you in contact.

Detail Images: Login to view embedded media
Howdy all!
_____________________________________________________

Cleaning out a few items I no longer need:

ALL PRICES ARE SHIPPED Paypal FF / Venmo Preferred. Can do Zelle if needed.

I WILL NOT SEND YOU A PM, YOU MUST PM ME TO AVOID BEING SCAMMED.

Let me know if you have any questions!

_____________________________________________________
RCBS Turret Press Spare Heads: $35 ea - both like new condition
Hornady .300 blk Die Set: $25 - Only used on about 100 rounds
RCBS AR Style .223/5.56 Die Set: $25 - New never used SOLD
Hornady 6.5 Creedmoor Brass (100ct): $30 per 50/$55 for 100 - New never used
DA Xeno ASR Mount: $95 - Used, only some surface marks from removal with vise SOLD
DA Xeno Muzzle Brake 1/2x28: $35 - Used, some carbon buildup SOLD
DA Keymo Muzzle Brake 5/8x24: $35 - Used, some carbon buildup SOLD
FCD Keymo Flash hider 5/8x24: $65 - Slight use, little carbon buildup
True North FDE 1913 Gripstop: $30 - Lightly used, only salt is from the rattle can paint SOLD
_____________________________________________________

Selling my Manners MCS-TCS with mini chassis stock. The stock is in almost new condition. I purchased the stock last year from Altus and it's got one trip to the range and one PRS match under its belt. The only noticeable wear is on the leading edge of the bottom metal, pic attached. It's a great stock, the only reason I'm selling it is my MDT chassis just fits be better. Wiebad cheek pad is included with the stock.


Asking $1400.

Nightforce NXS 5.5-22x56 moa npr2 scope with nightforce rings included in this price of $999 shipped to you

Hello Hide,

I have several Pvs-27 long range night vision clip ons available for sale. I will be offering these 3 different ways to hide members. These are used and in good working condition. Listed below are the 3 available tiers we have. The picture below is of the best, typical and worst condition units out of 10 of them to give an example of tier 1. All of the tubes are clean and look identical. These are not like pvs-30 refurbs that have a FOM number on them. They are all green phosphor Omni VII and these do/did not come with data sheets.

Tier 1

Used condition:
Housing will exhibit typical wear on coating and mount but will be guaranteed to function 100% as it should. Collimation will also be within spec! 1 year warranty
**Price: $5000+shipping**





Tier 2

Used condition/ new coating:
Housing and mount will be stripped and re coated with Cerakote’s air cure ceramic coating. We will have Jet Black, FDE, OD Green, Vortex Bronze and Burnt Bronze colors to choose from upon order. All factory markings will be re lasered onto the housing as well. See pictures below for an example. 1 year warranty
**Price: $5500+shipping**




Tier 3

High spec Unfilmed L3 white phosphor re tube:
On these we will pull the Omni VII green tube out and install a new L3 2500+ FOM unfilmed white phosphor tube. This includes custom coating and laser work. Lifetime warranty on service and 2 years on tube.
**Price: $11,500+shipping**



Prices are subject to change slightly throughout this sale. Not much but it could happen as this whole batch shows up.

Current wait time:
There will be a slight wait time on the coating as it takes time to cure and laser them. Wait time on the re tube is currently about 4-6 weeks. Key word about. As more guys order this tier, wait times will go up accordingly.

**Yes, you can purchase a Tier 1 unit and re tube it later with the tube specs mentioned above. The Tier 3 service with that specific tube is $6500. **

Warranty details:
I stand behind my builds. I take great pride in what I do and most of you know that. The pictures will show my work cosmetically but the same attention to detail is kept on the internals as well. Our warranty covers anything mechanically that can, will or has gone wrong except for recoil damage. Yes these are still magnum rated so you can indeed mount them to a .50, but sh!t happens. The tubes I’m putting in will be carefully selected for your application. For example, we match tube specs to the rifle platform you plan to use it on to ensure the best performance and recoil resilience.

Collimation guarantee:
Pvs-27’s are notorious for being way off on collimation. We won’t get into why but that should be your last concern here. All of these will be mounted to a collimation table to ensure proper alignment prior to shipping to you. If it’s off we will re align the optic and our collimation warranty is guaranteed for life. This warranty comes with all 3 tiers listed above.

Feel free call or text me during normal business hours at the number below for any questions for a faster response.

Thanks!
Jay
Sure Shot Night Vision
8three2-7seven3-7zero03

I know, I'm old-fashioned. But I've never seen the need or advantage to tumbling another way. My brass comes out very nice, with just the media and a squirt of Frankfort Arsenal polish I've had for many many years. I've generally been able to get 5-10 years out of a couple of bags of the walnut/corncob media, but had to replace it last year because it was so dirty.

I was astonished how much the price has increased, likely due to shipping costs. It's like $2/pound with shipping! But I sucked it up, got 2 bags of each, and resolved to make it last as long as I can.

I saw somewhere somebody said throw a dryer sheet in there. Well, our dryer doesn't accept dryer sheets (Miele), but on a whim I cut an old t-shirt into 4x4" sections and threw 4-5 of those in there.

And it works! The dirt/carbon sticks to the t-shirt and there is no longer a pile of black dust on the center pedestal of my vibratory case cleaner. (I used to vacuum this off to try to keep the media clean for longer.) I discard the dirty rags after each session (rather than wash them).

Just a tip for those Boomers among us who are still using traditional media for case cleaning.

Hey folks.

Is anybody here around the Williams, AZ area? I bought a car on Bring A Trailer and I guess I forgot the trailer part as I got 60 Miles before the radiator hose blew and no hose for the car can be found today in time for somebody to put it on. We had planned our trip around bringing this beast home, seeing Grand Canyon, Petrified Forrest/Painted Desert and on back to ’Bama. I figured a few issues would be discovered; but, totally didn’t see this happening as the car has tons of records.

Issue is I cannot find a shipping company that can get to this car soon (let alone scammers); so I’m either going to have to tow the car to the dealer in Flagstaff (500 bucks after the tow last night from the South Rim Parking Lot to Williams. So I’m looking for somebody with a trailer who can help me get the car to Flagstaff or better help store the car until I can get a shipping company to pick it up.

Pushing a royal time limit after getting screwed by one shipper this morning and the shop here in Williams who said they couldn’t fix it and now demands their car be moved from the lot. Girlfriend has to be in New York this coming Tuesday. I have a rental car now after getting to flagstaff which is our current way home; but, have to do something with the the POS I bought. Already lost my ass on this one….

Thanks for any help/advice.

BytorJr

I have an AAC Handi-Rifle with a Bushnell Banner 3-9x40 scope on it. It is the special edition that AAC did with H&R back a long time ago with a 16" barrel. It is actually noticeable shorter than an AR or bolt action with a 16" barrel because there is no action taking up space. I included a picture of it next to an AR SBR with a 10.5" barrel for scale. This is the most compact non-SBR I have ever seen. PS It originally came with a youth length stock for an even shorter overall length. I changed it out for a normal length stock from H&R to have a more comfortable LOP but will include the original youth stock with it.

It is a fun little rifle, but I hardly ever actually use it and have a few other 300 BLK rifles so putting it up for sale. I can include some load data for amusingly quite loads I've worked up for it. Ex: 90 gr XTP over Trail Boss, 180 gr over Unique, 200 gr Maker Rex for hunting, etc. I could also include some loaded ammo for an additional cost if the buyer is interested.

$300 plus actual shipping. I have a local FFL that will act as the shipping FFL for $30 if your FFL doesn't accept shipments from non-FFLs.

I currently use soft gun cases for all of my transport to/from range but have been looking into a few hard cases to have on hand as well.

While I love Pelican products, the cost for their rifle cases is just not in the budget right now.

Looking into Plano and debating between the all weather 2 or the rustrictor series.

Does anyone know anything about their rustrictor "technology"? Is it actually anything beneficial to support the price premium over the all weather? Apparently they use it in their tackle boxes as well.

Just thought I'd see if anyone here has any feedback/suggestions. Thanks

SOLD

M24A2 with 11/16-24 threaded barrel with cap. Barrel is profiled for the OPS Inc / Allen Engineering M24 suppressor . Badger Ordnance M24A2 DBM with one magazine. 20 Moa MARS rail. M24 trigger. Dry lubed bolt and receiver bolt raceway. Has all the correct markings.

Please click here to view and purchase.

$5555 shipped

**

**

Hello , my living situation is changing at the end of April and I need to find a place to live so I'm looking for a room to rent, preferably in Orange county some where as my employment is in Irvine. I'm 31 and I work full time as a cnc machinist . I have a few firearms and I'm not sure there are too many renters that ok with firearms in the house , so that's why I'm asking here .

What I bring to the table :
rent of course and
if you have a private residence I'm willing to mow and edge lawns
clean / vacuum the house
I have a fair amount of reloading equipment , Anneal made perfect machine , Dillion 650 , RCBS match master
I'd be willing to share those things with you as well

private message me if you think I'd be a good fit or if you know some one .

I took my kids to Disney for 3 days and when I returned home, the attorney I've been dating for the last 5 years cleared out my house. She literally took everything including my kids beds, all the plates, silverware, even the toilet paper... no I'm not joking. She left the guns, ammo, and a couch. So now I'm selling my entire collection of guns and ammo to try and save my house. I'll post more as soon as I can. I'm located near Tallahassee, FL., If you're LEO/MIL let me know and I'll see what I can do price wise. I did post this to another forum also. I have more that I will list as soon as I can. I have a ton on mags, scopes, etc that I will be listing as I get time. Buyer to pay for shipping/insurance.

All prices are without scopes.

1. Standard Products M1 Carbine 1943 barrel $1100 Sold
2. Inland M1 Carbine 1943 barrel $1100 Sold
3. Remington 700 Varmint Laminate Special .22-250 $1200
4. Remington 700 BDL .243 Engraved, High Gloss, Walnut $900 Sold to Jit2224
5. Daniel Defense MK12 5.56 $1700
6. Daniel Defense Ambush A11 5.56 Pink Camo $1200
7. LWRC M6IC Enhanced $1900
8. Remington 700 Sendero .22-250 $1500 Sold
9. Colt Vietnam War Issued M16, all Colt except Nodak spud lower $2000
10. Colt M16 replica built with mostly original Colt parts $1200
11. Colt AR-15A4 Lightweight LE Carbine w/ Daniel Defense 12.0 FSP rail 5.56 $1200
12. Arsenal SLR-101S 7.62x39 $1500 w/ PR-01 rail
13. Arsenal SLR-107CR 7.62x39 $1900 SOLD
14. Daniel Defense V5 Lightweight 5.56 $1400
15. Colt LE6920 LEO restricted marked w/ Daniel Defense 12.0 FSP rail $1300
16. Remington Sendero .338RUM $1800 SOLD
17. FN SPR A5M XP .308 $2000
18. Marlin 881 22LR $250 Sold to Jit2224
19. Winchester 320 22lr with 5rd and rare 10rd magazines $400
20. Wilson Combat Scattergun Technologies TR-870 12GA Brown cerakote, shell holder, surefire lighted forend $1400
21. Glock 19 Gen 5 9mm with night sights, new in box $450  SOLD
22. Glock 48 w/ Ameriglo night sights, new in box $400SOLD
23. Ruger SR-22 threaded barrel $375

Use AMP annealer for sale. Thank is the MK II and came installed from the factory with the aztec mode.

Has worked flawlessly. Comes with power cord, and pilots for 6.5 prc, dasher and BR.

Has light masking tape residue on the top of it from where I had tape and my codes I used

I want to add that when I used the amp mate I had intermittent connection issues sometimes it would connect right away sometimes it would take a while to connect. AMP guys told me to send it in it might need a new usb port. I never did because I got rid of the ampmate and had no need for the usb port.

Annealing and Aztec worked fine and I’m the original owner




$1250 shipped