Up for sale is my KAC SR15 Mod 2 (this is not the new 3.2 bolt). Rifle is NIB condition and never fired except for the factory. It will come as pictured with the original case, one non-windowed pmag, and a pic rail and rail panels.

I got this rifle a couple years ago but never got to putting optics on it or shooting it. I also picked up an LWRC Six8 around the same time and that is the rifle I hunt with and shoot the most so this just keeps sitting in the safe.

Price is $3,500.00 if you are around Wausau, WI. I prefer dealing locally and I’m willing to drive about 1.5 hrs either direction from Wausau. If you are not lucky enough to live in the great state of Wisconsin, I’m asking $3,600.00 shipped and insured. Only going to ship to FFL. Please know the laws of your state.

If you want more pictures or have questions, send me an IM here on the Hide or text nine2zero-7one6-48two6. I can also be available for a phone call or FaceTime most weekdays after 7:30 p.m. CST.

More interesting to read who is giving to this moron.

I wonder what a forensic accounting of Greta Thunberg’s carbon-dripping jet-set would look like?

On the bright side… if all the money is being spent on Hoggs cushy lifestyle and paying for BS… it’s not being spent to erase the 2a. So you go David Hogg.

You got busted with your snout in the gravy bowl… Mr. “Survivor.”

Wonder what “the establishment” would be doing to a Trumper if this was how their pac’s were run?

Sirhr

I joined this forum less than a month ago, seeking information & some advice about expanding my tactical gun skills to include longer distance precision shooting. Longest shots would probably be less than 500 yards.

I have a couple of decades of practicing tactical shooting skills behind me, all AR based.

To those who say a lower cost rifle isn't accurate, I say BULLSHIT.

Yesterday, my brother & I were shooting 100 yard targets. I normally shoot at poker chips with a contrasting yard dot in the center for contrast. Chips are 1.5" in diameter, yard dots are .75 diameter. Hitting the chip isn't difficult, hitting center of dot is.

He took an unspent 12 gauge shotgun shell he found laid it atop the 2 Inch foam archery target we use to staple targets to. The primer end pointed at me. He placed a red target dot over the primer so I could see it. The front of the shell was resting against a wood backstop people staple their targets to. My foam backstop rested against it..

1 shot, and I hit the shells primer, igniting the shell, the powder burns are evident. Examine the board and you can see exactly where the shell was laying when hit. The shotgun blast penetrated the plywood backing.

We found the remnant of the shell & the red paper dot..

Now you tell me again how you need a high dollar gun with yada yada yada aftermarket parts to be accurate.

I did this with my .223 Savage Axis II Precision and a Vortex Viper Venom scope I bought less that a month ago shooting my reload of a ArmorAlly 55gr fmg, 24 grains of Alliant 1200r with a CCI 450 primer and a range scavenged case. Twist on rifle is 1:7. Hardly considered an accurate load by many.

So when people ASK for opinions on how to get started, dump the bullshit about needing a gun way outside their budgets, and offer real advice. Don't do describe your "dream gun" you don't own, actually try to help them..

Some GREAT, and very accurate weapons are out there that sell for $400 and up. Ruger, Savage, Remington and others are great starter guns to learn accuracy skills with.

Listen to their questions and offer helpful suggestions, not the same bullshit of "just save up more money" so they can afford a gun you probably don't have yourself.

I may be in the minority on this forum, but for my style of shooting, accuracy is #1, and I think most feel the same. Your "sub MOA" is impressive, but far more when inside the bullseye of the target.

-MDT Cyke Pod Gen 2 standard single pull Arca

I doubt I still have the original box, it’s been used but not abused. It had the spike feet and those show the most wear. It’s got the ARCA mount and pan lockout feature. 475 shipped to you

• 100 rounds factory Federal GMM 260 Rem 142 SMK. The only place I can find it in stock is 49.99/ box. I’ll do 40 a box shipped. I’ll eat the cost there. Only selling as a lot of 100. $200 shipped.
• Manson SAAMI 243 Win reamer. Live pilot with a nominal size pilot. It’s cut 1 chamber. 150 shipped
• PTG 6.5 Creedmoor reamer, the item code is down below, I’ve lost the print but it’s easily found by emailing them. Cut 5 chambers. 125 shipped with a nominal pilot.
• Lilja 22LR blank. 4 groove 16 twist, it’s roughly .715 an inch back from the end of the barrel. Ordering from Lilja it’s 430 for a stainless blank. I’d let it go for 300.

Manners TCS Remington 700 SA RH clones. Comes with 1 rear weight some spacers, arca rail with two weights and action screws. Stock is in great condition. $1400 plus shipping

Temp around 65°

Cool air, warm sun.

Data was taken with garmin chrono

I tried to get groups but strong unpredictable gusts up to 30 mph in varying directions made it too difficult to isolate the ammo for consistent groups

Black hills 77 otm's red box. Unknown if this batch used the 77 sierra or the 77 hornady. All shot with suppressor. Data is avg of all strings. (3 strings 25 rounds)
High 2690 low 2622
avg 2649
Std dev 21
Ex spread 68

Black hills 69 TMK (only 1 string of 10 rounds)
High 2732 low 2683
Avg 2700
Std dev 18
Ex spread 49

Aac 75 gr w/o suppressor (1 string 10 rounds)
High 2600 low 2505
Avg 2554
Std dev 29
Ex spread 95

Aac 75 gr w/ suppressor. Avg of all strings (5 strings 50 rounds)
High 2647 low 2516
Avg 2557
Std dev 24
Ex spread 131

Now comes the part I was most excited about. I tested the badlands co 75 and 77 gr loaded in the Nas3 casings. These have given some really high velocities and I was hoping I would get similar. I was a bit let down.

75 gr w/ suppressor (4 strings 40 shots)
High 2738 low 2619
Avg 2669
Std dev 26
Ex spread 119


The 77's where similarly "slow" for what I had hoped for. (3 strings 30 shots)
High 2705 low 2571
Avg 2638
Std dev 28
Ex spread 134 (3 very low velocity shots)


If I exclude the low velocity shots I come up with
77's
Avg 2651
Std dev 18
Ex spread 84

75's
Avg 2675
Std dev 24
Ex spread 99

It should be noted that after taking out the shots that where much slower there were basically 2 velocities for the 75's. Most where within a few fps of 2650 OR 2700 the 77's didn't have the two distinct groups the 75's did.

*edit* spoke with the dudes at badlands. I called strictly to give data and feedback to which they didn't find the data satisfactory. They agreed the velocities were about 75 fps slower on average then they would have guessed (should have been about 2750) and they Ex spread should have been half. Long story short they will send me some new ammo to test when i get home from this upcoming deployment, none of which I asked for. That was really cool of them.

On a side note the Nas3 ammo was felt way less gassy than the aac ammo.

The last test was a poi shift when the suppressor is removed. My aac 75's (what it's zeroed on) shift .75moa left and 0moa vertically

Hard to let this one go. Beautiful Custom 7PRC.

I bought this direct from the builder. I have not shot this one. I have a 6.5PRC from him as well and its a one hole gun!

7 PRC built on a Pierce Engineering Shadow action with 20 moa rail.
24" Proof Research barrel (1:8 twist) thread 5/8-24 and fitted with a Salmon River Solutions Ti Chub brake.
Bix & Andy Tacsport trigger,
Hawkins M5 bottom metal with a Wyatts box and follower.

Barreled action is bedded in a Manners EH1 swamp camo stock with two left side flush cups and a pic rail up front.

Weighs just under 7-1/4 lbs on my scale.

Rifle was broke in and verified for accuracy with 180gr Berger Hybrids.

I also have one box of Peterson brass that was used for break in and accuracy testing that will come with the rifle.

Asking SOLD shipped from me to your FFL. If your FFL does not accept from individual, then add $50 for FFL to FFL

Impact Precision 737R
Stuteville Bartlein 20" carbon fiber barrel (70 rounds fired)
Trigger Tech Diamond Pro Curved
TBAC brake
Tack driver. Just not using it since I got my 22CR
$2,000 shipped CONUS

Also have a 26" M24 heavy barrel (100 rounds) that I will sell for $500 or $2,400 as a package with both barrels

Berger 105 Hybrid x4 500ct boxes (2,000)
Lot #2242
$1,060 for all 4 boxes shipped
$540 for 2 boxes shipped
$280 per each box shipped

SOLD
$1,900 shipped CONUS.

Brand new in box. Factory sealed.

This is the dark earth model.

Mark 5HD 5-25x56 PR2 Mil

We have them in stock and ready ship! Message me if you need a package deal with weights, dampeners, control bridges.

Selling a like new gen 2 ckyepod with cant lockout and rrs sc-lr clamp. Wrapped the legs but the grip tape is under, rubber feet, $575.

Sold my 6GT and have 30 boxes of ammo for sale.

New is $49/box ($1470 total). Will sell and ship all 30 boxes for $1,000 plus shipping. Willing to meet in CO for no shipping.

• Hornady 109gr ELD-M
• Ballistic Coefficent: G7 0.295
• Hornady manufactured brass
• Small rifle primer
• 2885 fps average from 26″ barrel

Factory rifle with HUXWRX muzzle device added, and included.

IMI 77s and Black Hills 77s SMKs, both tipped and regular showed promise. The optic shown didn't give me a chance to really test beyond getting a decent zero to confirm groups, but JPs traditionally shoot well.

Rifle is in as close to perfect condition as it gets, but it is fired for under 100 rounds.

Scope & Rings available to the buyer as additional. Everything else pictured goes with it including original packaging.

No trades please.

$2,750

Thanks,
Preston

Sierra Leone’s President Julius Maada Bio declared a national emergency on Friday over surging abuse of kush, an addictive drug that can be manufactured from powdered human bones. Addicts have been digging up graves to get the bones they need, prompting the police to station guards around cemeteries in the capital city of Freetown.
Kush is a synthetic cannabinoid drug that began circulating in Sierra Leone less than a decade ago. It is mixed and sold by organized criminal gangs, who use a variety of different substances to concoct it, including poisonous chemicals and the ubiquitous scourge of the modern drug scene, fentanyl. One of the ingredients in the most potent kush mixtures is sulfur, which can be obtained by grinding up human bones. Some users also hope to extract formaldehyde from embalmed human tissue.
The presence of human bones in the drug mixture also lends it an aura of supernatural mystique. Early reports treated the use of powdered bone as apocryphal, an urban legend that might have been started by the gangs as a marketing technique, but apparently many users are firmly convinced that human bones are an essential ingredient. As the popularity of kush exploded, so did incidents of grave-robbing.
Kush abuse flourished in Sierra Leone with astounding speed. A local doctor told the UK Telegraph in January that there were 47 known users in 2020, but the number of kush addicts admitted to hospitals surged over 2,000 in 2023, and many more are believed to have died at home or in the streets.
Government officials today say only a fraction of the rampaging kush epidemic is reported to police or doctors, and even that fraction is overwhelming hospitals and clinics. There is only one dedicated drug treatment center in Sierra Leone, it has been in operation for less than a year, and it only has 100 beds.
The Sierra Leone Psychiatric Hospital estimated kush-related illness and death has increased by 4,000 percent over the past four years. Some doctors attributed this explosive growth to the Wuhan coronavirus pandemic and its economic disruptions.
Kush users have a tendency to experience severe physical and psychological reactions to the drug, especially when they smoke mixtures that include potent toxic chemicals. Many of the victims die from organ failure, and visibly swollen limbs are a common symptom of heavy use.
Most of the users are young men, who say the state of hypnotic, surreal ecstasy they experience is worth the side effects, and the utter destruction of their lives.

Wading deep into the Blaser R8 waters and consolidating some stuff.

Selling a rifle I built with brand new parts except the barrel which has well under 100 rounds on it. Just over 6lb pictured.

Option 1) $4,100
Defiance Anti Nitride, PRC cut, Standard and Magnum Bolt
Manners Factory Stock, Carbon
Black Canyon Rifles Proof Carbon 18" 6.5PRC 5/8x24 Cerakote Black
Trigger Tech Diamond Two Stage
Hawkins Hunter Bottom Metal

Option 2) $5,300
All of the above with:
NIB Factory Proof 22" 6CM Carbon Barrel
NIB Factory Proof 22" 6.5 PRC Carbon Barrel

Option 2 barrels available separately.

Thanks,
Preston

Like new condition. Bought 2 of these scopes new last summer and installed this one on a spare gun. Comes complete with all the original parts and paperwork. $2075. Includes shipping and insurance.

What red dot are you running on your shotgun?

Armageddon gear nylon goods, all in multicam as shown. It’s either new or field tested and that’s it. Nothing is “well used” damaged, ripped, or dirty.

* I believe the kydex mag pouch is made by ATS.

From left to right
1) SOLD 40/40 ammo holder - $50
2) SOLD Squishy bag - $30
3) SOLD 308 mag pouch w/ belt clips - $15
4) SOLD10rd Adj 308 mag pouch (x2) -$30
5) SOLD Python Bag - $35
6) SOLD Bullet Bag - $35 or
$50 with 2 100rd MTM 6mm cases
7) SOLD Zip Top Utility Bag - $35
8) SOLD Tripod Caddy - $115

Shipping included in prices.

First I’ll take it post in this thread, followed by a message will have first right of an item.

PayPal FF, Venmo or CashApp all are acceptable.

Good morning, I have some things I want to clear out since they are just sitting. Shipping is $10 flat rate, buy one item, $10, buy all, $10. I am willing to do local pickup to 38555 for parts and ammo. I am also open to reasonable offers.

Here's the stuff:

Leica 2400-R: Like new, used it a couple times but have never fielded it. No box. $450

MDT magazines:
(2) .223 Polymer mags $25 each SOLD to @FimRire RongLifle
(2) .300WM Metal mags $50 each (3.715 inch) SOLD to @ChiefSillyHorse

X-Caliber 12in .223 Wylde M24 Profile barrel for Savage Small Shank /Zermatt SA: $250 obo. I have about 100 rounds through this and attest it's accuracy. This is a heavy profile barrel and is taken care of. SOLD to @ChiefSillyHorse

Here is a Copy/Paste from order:

Bighorn Pre-Fit
Barrel Steel: 416R Stainless Steel
Barrel Length: 12"
Caliber & Twist Rate: .219/.224 1:8 Twist 6 Groove
Bolt Action Contour: 30 - M24 / M40 1.058 3 .900 Small/Reg
Rifle Chambers: .223 Wylde
Muzzle Options: 1/2"x28 Threads (.20,.224), 11° Crown

Rugged Ridge Rear Support System: $80

Fix it sticks Optic Kit: $140 Never used. Part number: COMBO-FISMUTK-BLAB

300WM Ammo: Asking $200 or trade for 300BLK subs. One of the boxes of Remington Core Lok is partial for when I was doping rifle. SOLD to @ChiefSillyHorse

If you have any questions, feel free to ask.



Due to time constraints and trying to give the best communication possible, I am going to consider etiquette when replying and give a 15 minute response window requirement. I do not consider anything sold until funds are received therefore if I do not get a response within 15 minutes, I will move to the next person. Thank you for understanding.


INTERESTED TRADES: 300BLK Subs and also looking for an Atlas PSR Bipod.

KRG Bravo, rem 700 SA inlet, Stealth Grey, comes with KRG arca rail.

$375 plus shipping.

Hello, first I would like to say that I read the couple existing threads on light primer strikes and followed the advice that was on those threads. I wanted to post my issue as well as magdump some photos I took with this build.

I purchased a Zermatt Origin and a Proof 6.5 Creedmoor barrel prefit for the Origin. Action was put together and headspace was checked with go/ no go gauges. Go gauge closes and no go does not as normal. I paired this with a triggertech Primary trigger. Action was torqued to the recomended 85lt lbs using the zermatt action wrench.

Today I went to the range to zero the rifle and test it with 4 different store bough ammo boxes ( hornady match, Norma match, federal 120g and Hornady black). I shot a total of 20 rounds, 15 of which had what seems to be light primer strikes. The 5 that did go off the primers looked slightly harder hit. None of the ammo had issues feeding, execting or signs of pressure excess or anything like that ( it was factory ammo). You can see the difference between the fired / non fired.


I took some of the ammo and shot it out of my beraga B14 and it shot no problem, Thinking maybe the ammo might be bad.

I took the gun apart at home and checked headspace once more and go works, no go does not. I removed the trigger and re installed it. Took the bolt apart and cleaned ( no excess grease on the firing pin or anything ) I took some Hornady brass that I was reloading and added some CCI primers to them ( NO LIVE ROUNDS). I hand fed the primed ONLY casings into the chamber, and 10/11 rounds went off. The 11th round had a light primer strike. I added 5 more rounts with primers and yet again light primer strikes.




The one with the blue tape is the round that upon firing the primer did not go off.




One thing I did find weird was that I measured how far the firing pin went in when the trigger was pulled OUT of the chassis and in the chassis and I came back with 2 different numbers.
OUT OF THE ACTION

In the action ( Im not sure if this is significant or not.) I checked the action screws to make sure they werent blocking anything and no they were just fine.


I have no way to test the trigger vs a stock factory trigger or whatnot ( unless you all can think of a way)
I was wonder if maybe you guys can offer me some help in diagnosing this issue?

Impact 737 223 rem complete bolt assembly, Proof research competition contour 223 Rem 1:7T 26" has 600 documents rounds, and 2x MDT 10 round metal mags.

$900 shipped NOT SPLITTING UP.

Have brass and bullets if interested. NO TRADES.

What do you guys use for flea and tick control on your dog? Have used seresto for years, but supposedly has some side effects, neuro I think. Anybody done any research into something both safe and effective, you know, like a covid shot lol.