Cartridge Caddie For Sale. Like New condition.

6.5 Creedmoor (or similar cartridge family) , with ledge at front for timer or cell phone. Retail $65.00, offered at $45.00 shipped.
Note: On Target offers exchangeable blocks to convert to other cartridges.

1. Cole-Tac Amo Wallet, standard size, holds 120 rounds, Coyote Brown, excellent condition. Retail $90.00. Offered at $65.00 shipped. SOLD

2. Walsh Custom Defense Ammo Carrier, holds 120 rouynds, Coyote, never used. Retail $130.00. Offered at $95.00 shipped. SPF SOLD

3. Walsh Custom Defense Ammo Carrier, holds 56 rounds, custom made for .300 PRC / .300 Win Mag / .300 Norma Mag / .338 LM, grey, excellent condition. Retail $130.00. Offered at $95.00 shipped. SOLD to jeremyhunter

4. .300 PRC retail $80.00, offered at $60.00 shipped SPF SOLD

Zelle or PP F&F no note.
Prices include shipping to Continental USA.

Note to self. Proper attire to wear to a formal gathering of world leaders:
Olive Green Fatigues


The Fidel Castro revolutionary look is hard to pull off when you're 5'-3".

With all the billions of American taxpaer money the big guy is laundering through your regime, you'd think you could afford a fucking suit and tie.

I was wanting to post this incase it helps anyone. I know some of you may or may not already have a pistol braced firearm, and that anyone who follows the new rule is an idiot - but for someone with multiple firearms that could be taken away if I was pronounced a felon, and kids to feed, I try to obey the current rules (as wild as that can be from day to day.)

A lawyer advises that by atleast trying to play along, it could help out in a court case against you if that was to happen since anyone can apparently be a felon overnight. Because they know the majority of the people that have a braced firearm I’m sure. Therefor, the statement of falling into a trap if you file the form 1 is void in my personal opinion. We probably all have enough parts laying around to give us “constructive intent” regardless.

This is just my opinion though and not the first time I’ve been called a fool. And, I’m sure everyone else’s ideas on the matter are more valuable and accurate than myself. Anyways, here’s the info I have that may help someone since all we have is a permission slip of a form 1;

I can....to a point....enjoy a persons "art" aside from how I feel about that person as a person. This guy is one of those people. The man could entertain at a level that is just not common. Had a voice not often seen. If you like the music or not you should understand the ability of the man to sing. If you have never watched it before you should, I doubt you will come away without the thought, he could entertain. It was an event and an entertainer the likes the world will never see again.



Login to view embedded media

So are we to believe there is no camera footage at all? Or did the film/pictures get erased?

No not like that:

Login to view embedded media
Like this:



Photo of from the next day. Still leaking people juice. Wire wheel on an angle grinder cleaning up a drum brake backing plate from a 1963 VW bug. Wheel grabbed something and in a hot sec bounced off my arm. Happy it missed my watch.

The best part is I have these very nice Kevlar sleeves that would have saved my ass, did I wear them, nope, why it was hot. But wait you have AC in your shop right? Yup, scraping off 60 years of rust is dusty dirty work, I had the door open. Live and learn. I have wounded myself a few times this week. Saturday while leaning under said rust bucket, I stood up too quick and have a nice hole in my head, you know how a bald head bleeds...... Then Tuesday I was doing "a quick weld" and splatter landed on my foot, burned a hole through my shoe and on the top of my foot I have a nice little round BB sized burn, ruined brand new socks....again it was only a second, so why wear the boots.

So the point of all this, if you are screwing around with this stuff, wear the gear, you don't because it is only a second, or it is too hot.....whatever. I will likely have a bit of time healing this one. Also have some form of medical stuff in your "hobby area", you will be adding to it with each new boo-boo, after this I added larger bandages, I already had wound wash so hopefully I got most of the "grime" out of it and the infection will not be too bad, but it was a very dirty wound.

Wear your gear, and when you do hurt yourself have something to keep you from leaking all over the place.

Looks like Gradous Rifles is back up and running!

Hey guys, for starters, I know these aren't sniper rifles, but I'm not sure what other group to search in. I've been searching high and low and can't find much on these rifles. The antique side of things isn't really in my ball park. I inherited several old guns that I really don't have space for and will never do anything with. I'd rather them go to someone who may want them or want to refurbish them. Any info of what they may be worth would be appreciated.

-First is an old .300 savage with a Redfield 2x-7x scope on it. Decent shape, definitely got shot.

-Second is a 250-3000 savage with an unknown to me scope, it's definitely old and used.

Again, any info offered on these is appreciated.

This is a long, but worthwhile watch:

Login to view embedded media

For sale is a well-cared-for Foundation Centurion cut for a Zermatt TL3 SA, color dark. 1/2 a brass weight kit, Hawkins bottom metal, and the full-length foundation arca rail are included.

*The blue tape is to hold the action screws in, so I don’t lose them*

Splitting up the items: shipping included.
-Foundation: $1,050
-Hawkins Bottom Metal: $150
-Foundation Arca Rail: $80 SOLD

-All together: $1,150 (Centurion, Hawkins Bottom Metal, 1/2 weight kit)


Zelle or USPS MO; the first “I’ll take it” wins.

Thanks for looking.

28" Bartlein barrel 1-9" chambered in 300 Win mag, Blueprinted REM 700 LA, loves 225 grain ELD-M and H1000. Radial brake on 5/8-24 thread. Round count 186 rounds. Triggertech Special 1.0-3.5lb trigger.

BA without TT special $950 shipped
BA with TT Special $1100 shipped

Hey all,
I'm looking at a LPVO for my Ruger American Ranch in 5.56. I have a Burris RT-6 on my RAR in 7.62x39 and it's great. Anyway, PA has their GLx 1-6 on sale for $399. The problem is, I find the reticles on the GLx to be "busy". That being said, I haven't heard any negatives about the new Gen IV SLx 1-6 and the Nova reticle. So, is the older GLx model with the "busy" reticle (both the Raptor and Griffin) THAT much of a better scope, that it would still be a slam-dunk to buy at $399, or has the new gen of SLx kind of "caught up"? Or, just get another RT-6?

Casually looking for a 1895CB to go with a 336CB I have and have really enjoyed. I found one made by Remington for a decent price, but not being local to it I can’t put my hands on it to see how the fit and finish is compared to my JM Marlins. Anyone here own one or have you ever handled one?

I also found a Marlin LTD IV, but it looks like it’s not been a safe queen from the blurry pictures, which still might be ok if I can get better pictures as long as the bore is good. I doubt anyone has put enough rounds down one to wear out the barrel even if they were competition shooting with it.

I have found several 1895 38-55 CB’s that look nice, but I already have 45-70 loading stuff as I have a 1895G and don’t really need another round to load for unless I can come up with a compelling reason to select a 38-55 over a 45-70, which I haven’t so far. Anyone have experience with the 38-55?

Hello, selling my shooting stuff as I have a major career change coming and need cash.

Used for less than 300 rounds, non-motorized (used a battery power drill from Amazon); comes with 223, 243, and 264 cutting heads and the Inline Fab mount.

$575 shipped in the US.

Zelle or USPS MO only; The first “I’ll take it” wins.

Thanks for looking.

This has been talked about but looks like it's finally here in 2 reticle options. A 1-10 FFP made in Japan(not L.O.W), FFP, for under $1000. Interested to see the reviews.

I got a 26" 1-8 Savage Small Shank Nut Prefit straight barrel from https://theurbanriflemanstore.com/ALL-PREFIT-BARRELS-FOR-BOLT-GUNS

Ive been hearing people talk about them and saw good results so I decided to reach out to Brad and get a test going. I was really interested in what kind of performance can be had out of a $289.00 (+$100 for muzzle threads) ready to go nut barrel for a savage small shank or ReMage, Tikka, etc...

The barrels are made using a Wilson blank. This is my first Wilson bolt gun barrel but Ive owned, tested and shot a lot of Wilson barrels in AR's for years and they were very accurate.

Test setup was as follows

Bighorn/Zermatt TL3
Bighorn/Zermatt 12 Point Barrel Nut
XLR Envy Pro JV Comp Chassis
BnA TacSport Pro 2 Stage
Razor Gen3
SEB Neo Rest
LabRadar

26" 6BR Urbanrifleman 1-8 Straight


I loaded up some mini OCW around my known 30gr Varget loads shot in my other 6BR barrels with 105 Hybrids and 105 Scenar-L's. I was amazed how well this barrel shot, especially for $289.00!! One other thing I noticed, this barrel is FAST. I mean VERY FAST. Looking at data on my last 4 28" 6BR Bartlein and Kriegers... I was at 30gr Varget getting 2850 from my 28" Bartlein with 105 Scenar's 2 weeks ago... Where Im getting 2852 with 29.6gr Varget (SAME 8LB just of Varget) out of the 26" Wilson..... So 2" shorter, and 0.4gr less powder, same velocity with same bullet, brass, primer and Lot of powder Crazy.. Also, with the 105 Hybrid in the 28" Bartlein, Im at 2844... In this 26" Wilson with 30.0r powder Im at 2860..... so 15 fps faster and 2" shorter barrel......

Anyone looking for a prefit nut barrel for their Origin, TL3, Remington, Kelbly, Tikka, Terminous, Curtis, etc.... your gonna be hard pressed to find something that shoots this good for anywhere close to what these barrels cost.

I havent even done a seating depth test yet and we have groups in the 0.1's and 0.2's. Looking forward to testing these loads out further.





Login to view embedded media
Login to view embedded media

Login to view embedded media

Login to view embedded media

Thinking I would get into 22NRL, I purchased this from another member, but I have seriously lost interest in comp shooting.

It had very few rounds through it when I got it and I put maybe 200 rounds on it myself. Shoots excellent with absolutely no issues within my XLR Envy Pro Chassis.

The barrel is a Bartlein 22" MTU contour, threaded with thread protector.

The Trigger is a TT Diamond,

Includes 2 magazines

$2k Shipped to your FFL. No Trades at this time.

Even he knows he's a joke. He's one step away from throwing his poo at his paid infomercial audience.

Login to view embedded media

Manners T2A GAP Elite Tac with thumb shelf

• Gen 2 Barricade Mini Chassis
• AREA 419 Arca Rail
• Wiebad cheek pad, 2 rd holder Velcro
• Midnight Camo
• Action Screws
• 2 flush cups, Left Side
• 1" recoil pad
• 1.350" barrel channel to accept any barrel

Will fit all Rem 700 SA clones, has bolt release cutout for Impact/Defiance

$1000 shipped

Only trades would be for a Manners LRH SA with mini chassis

Unfired FN FiveseveN MKII with 8 magazines.
(2) Mags are 10 round
(6) are 20 round (won't ship these to non-compliant states)
Comes with factory case.
Price is cash/zelle/bank certified check
Price includes shipping CONUS to your FFL
PM me with any questions.
card +4%

Willing to split scope from rifle. w/o scope the package is $6400. No trades.

Transfers to your FFL unless your local here in CO, and you want to pick it up from my shop.
Originally over $14K.
Comes with LRA bipod, Eberlestock soft case.

Here is the list of items included besides the above:
375 Cal 350gr CheyTac brand lathe turned bullets (688 count)
375 Cal 377gr CheyTac brand lathe turned bullets (100 count)
375 CheyTac brand unprimed brass (100 count)
375 CheyTac Bertram Bullet Co Unprimed FIRED Brass (40 count)
375 CheyTac Brand Unprimmed UNFIRED brass -New Neck Sized (41 ct)
375 Cheytac Brand Unprimed UNFIRED Brass (200 ct)

.375 CheyTac Neck Sizer CH Tool & Die (1ct)
.375 CheyTac Seater CH Tool & Die (1ct)
.375 CheyTac Fl Sizer Ch Tool & Die (1ct)
Sinclair .375 Cal & up 7/8 - 14 Expander die (1 ct)+
.375 Cal Sinclar Aluminum powder funnel (2 ct)
Sinclair Compensator Inserts .375 Cal (4 ct)
Sinclair .375 cal Neck Turning Mandrel (1 ct)
Sinclair XL Comarator/Bump Gage Body (1 ct)
Sinclair Chhamber Length Gage Insert .375 Cal (1 ct)
K & N Neck Turning Tool Set .375 Cal

ARD Schmidt & Bender Kil Flash set (1 ct)

42 rounds of CheyTac Brand.375 CheyTac 350gr loaded ammo
13 pieces of fired CheyTac Brand .375 CheyTac brass from above ammo

PM me with questions.
Price is cash/Zelle or Certified bank check (no USPS MO).
card +4%
Shipping at my cost to your FFL address.

I was telling my buddy (gun guy, but not a custom bolt gun / LR kind of gun guy) about long range shooting today and our conversation shifted over to rifle builders. Out of that comes my question, who is your favorite rifle builder that no one has ever heard of before? I'm thinking the guy that lives under a rock, out in the boonies, or just has no real presence out in the (digital) world, but can build a rifle like he needs it to breath?

On the right. I'll say it for him...Fuck you Maggot.

The problem in middle life, when the body has reached its climax of power and begins to decline, is to identify yourself, not with the body, which is falling away, but with the consciousness of which it is a vehicle. This is something I learned from myths. What am I? Am I the bulb that carries the light? Or am I the light of which the bulb is a vehicle?
One of the psychological problems in growing old is the fear of death. People resist the door of death. But this body is a vehicle of consciousness, and if you can identify with the consciousness, you can watch this body go like an old car. There goes the fender, there goes the tire, one thing after another— but it’s predictable. And then, gradually, the whole thing drops off, and consciousness, rejoins consciousness. It is no longer in this particular environment. ~Joseph Campbell

The Power of Myth https://amzn.to/3O8JCfL)

So I’m pricing out a barrel for a potential ELR build. Some thing 2500 yards and in. A lot of places that I’m looking at for a blank are out of stock right now. So I’m looking for a .284 31 inch blank with a 1.250 contour, and 1:7.5 twist for a 7prc throated for 190 hybrids and 197 smk

One of the few places that said, they would be able to get me a blank, and a decent time frame was ace barrels. Now I know vudoo gun works uses them for 22 LR barrels and I know they are cut rifle but I don’t know much about them other than that. Has anybody had any good experience getting a barrel rifled buy them?