Seems to me that I can just flip a regular bolt over and use that in the lefty BC right? I've never had this issue so just wanted to make sure. I'm sure he has a regular bolt since he makes ar's himself(not builds, he manufactures lowers , uppers, ect).

Since nobody has one in stock, I’m building one. I’ve located everything but the action. Can anyone help a brother out? I’ve got stock, bolt, and barrel. Can you imagine how frustrating this is?

Researching plate carriers/armor and of course I want the best, so I jump to lvl 4 and looking at all the plates offered and got to thinking...

Sure, itll stop m2AP, but......... thats a lot of fucking energy hitting you.. a lot. Yeah, you wont have a hole in you, but 100% its going to put you on your ass instantly, now you're on the ground, with most likely enternal injuries/bleeding... Are you as good as dead, or atleast laying there, wishing you were dead after getting hit by a armor piercing freight train?

Possibly hacked

So a couple of years ago I bought some wild land in WV just to have someplace to shoot. Most of the property is vertical but there's enough level ground to have a really decent range. You only have to Bush Hog it a few times a year otherwise mother nature will overgrow it while you watch.
A few months back I got tired of the heat and the bugs and having to douse myself in bug repellant. I went and bought a nice on-sale, pre-built shed and dropped it on the only truly level spot within 15 miles. I then insulated the walls, got a 10,000 btu air conditioner, cut a hole in the short wall, and framed it in. I then made a box to put over it in a likely vain attempt to disguise, hide and secure it. So far no one has stolen it. Of course, they could just as easily haul off the whole shed. If they could find it. I'm probably wrong about that. I'm sure every local knows exactly where all the noise comes from. I expect anytime to show up and see big purple dicks spray painted all over it and everything gone including the insulation but so far so good.
I power it, and everything else by a Generac 7500 generator that I take with me in the bed of my pickup truck. I just backup to the shed and plugin. They'll likely strip out the wire I put in too, now that I think about it but so far, so good. I didn't buy the Generac for this, I had it because I lose power at my home every time a sparrow farts.
I can now shoot in air-conditioned comfort, on a nice shooting bench made into the long wall below the window. When I told my buddies about it they all laughed...until we all got together like we usually do. Guys were fighting for the window seat. It was a 93-degree day and the humidity was so high it was like a sauna outside. There are now plans to expand the window and bench wall. I don't have to do a thing or pay for a thing. All I have to do is say OK.
The only downside to any of this is that I have to drive about 2-1/2 hours to get there.

Update- 2/2023 We are caught up after the holiday chaos and I can't thank everyone enough for the support. Discount code DontFallForTheKnockoff is back up for 10% off rear bags As always, if you get a bag from us you're buying your perfect bag. We'll adjust it or swap it out until it does exactly what you want it to do.


If you're new to the hide check out one of our early threads for a primer on our bags. We started in a garage with a walmart sewing machine and a distain for rear bags that have no design intent.



Updated fill demo video to show how our fill is different-
Login to view embedded media
Tips on working the rear bag-
We’ve had a few guys ask about adjusting the bags because the locking full squeezes a little differently than a standard polymer bead fill. If you’re used to just squeezing the bag around to aim, the video will point out a few tweaks that will make for easy adjustment and also explain why the adjustment will actually help you in the long run
Login to view embedded media




Original post-
What’s up fam! Not much time for posting lately as we’ve been slammed but as always we appreciate all the support!

We’ve got a new bag coming out that is going to be the culmination of 4 years of testing, thousands of bags made, and feedback from you. I constantly get asked whether the Pro or the Rx is better and it’s hard to answer. Then it dawned on me to just design one that takes the best of both bags and rolls it into one. I’ll give some backstory and info below but if you’d rather cut to the chase the link to the bag is below.



I’ll do a quick rundown to show what the difference will be from our two most popular bags.

ELRx-
Our first bag was the ELRx. This bag was much different than what was on the market 3-4 years ago because we filled it fairly full and it uses our locking fill that really keeps your stock in place. This was an outlier in rear bags at a time when everyone else was talking about making 1/2 full bags with slippery beads so you could easily steer the stock. We went in the opposite direction as we don’t feel like steering the rifle with the bag makes any sense fundamentally. I see some folks entering the game now and talking about “stuffing” bags tightly as if it’s revolutionary and they came up with it…..I have to laugh bc they're missing an important part of the equation. Don’t be fooled by imitators. The ELRx is still our best seller for a reason.

ELR Pro-
Not everyone likes a firm bag. We sent some bags to Frank/lowlight a while back and he wanted less fill/more empty space to be able to squeeze the stock through the bag. We went back-and-forth until we figured out what fill level he likes and the ELR Pro was born. This bag is slightly bigger than the Rx but there’s more empty space inside the bag to allow your support hand to pinch the stock and do more of the work. This is great for pinchers bc you get the control without fighting slippery beads in a loose bag. We also added an adjustable strap on the short side to allow better hand placement in that orientation. If you like to pinch the rifle with your thumb and forefinger on the support hand this is the bag for you. I do try to stress to people that just because Frank uses it doesn’t mean it’s the bag you need. Our opinion is that most shooters are better off with a bag that is more full and I think a lot of people are coming around to that now.

The New Guy- The F1-
The new bag is going to bring the best of both worlds. It takes features from both the Rx and the Pro as well as adding some other tweaks/adjustments. It’s slightly more slim and we’ve adjusted the ratio in our filler to be more stable than ever. Both straps will have adjustability so you can loosen them or tighten them to get the feel you want. We’ve made and tested a lot of bags over the years and I can tell you this is going to be at the top of the food chain. As always it comes with free adjustments and a satisfaction guarantee.


If you already run one of our bags and love it I’m not saying you should run out and buy this one. By all means we’d love to sell you one, but I want to be clear this is not a product born of marketing or a need to just sell more bags. It won’t be wildly different from the Rx or the Pro but the adjustments and additions to tweak the design and bridge the gap between the two. I feel like it’s the best bag we’ve made 100%. It will be available in coyote and BMC only at this time because there’s something about those fabrics that have a great feel. This bag is designed to be the best rear bag we can make and that’s going to go all the way down to the feel of the fabric.

After a lot of flipping around, I finally ordered an HTG and as I don't think I really need three stocks for the same rifle, I am offering up these two.

McMillan U-3 short action (universal for Remington 700 and clones). Universal version of the A-3. If you like the ease of chassis bolt-in but want a fiberglass stock then this is your jam. This has a straight edge so it works for whatever ejection port you are rocking. The barrel width is 1.25" so bring your truck axel pipes. No damage, pic rail on the bottom with a flush cup, more cups left front and left rear plus one more on the bottom rear, adjustable via clamp wheel cheek, M5 DBM inlet, and adjustable length of pull.
$720 $670 $640 shipped cont U.S. PP f&f or you cover the fee.

SOLD - HS Precision take-off from a Sendero Remington 700 short action. This is a catch and release. Unmolested BDL inlet, double studs up front, one in rear, Remington branded butt pad, and a barrel channel that I measured at 1.238".
$275 $225 shipped cont U.S. PP f&f or you cover the fee.

Hit me with a PM if you want more pics. If you want to chat me up about anything, please PM me with your cell number.

I have great condition Kahles SKMR2 and Spuhr mount SP-4001 up for sale. Asking $320 for the mount and $1800 for the scope. Shipping is not included. NO TRADE PLEASE

Red Dawn premiered in theaters!

Wolverines!!!

Sirhr

Excellent condition AI AT 6.5CM. Has about 450rnds down the pipe. She’s a hammer with Hornady 147gr Match. Has this barrel on her: https://www.milehighshooting.com/ac...6-5-creedmoor-24-5-8x24-black-proof-research/

Rifle with original accessories, Six 10rnd AT Mags, and Atlas PSR Bipod and Spigot mount
$3,500 SHIPPED & INSURED to your CONUS FFL

****SOLD****

*800rnds of Hornady Match 147gr all the same lot # available to the buyer for $1,400 SHIPPED & INSURED

**ZCO/Spuhr not for sale

***First person to respond this thread saying “I’ll take it” gets it

****If you buy both the rifle package and the ammo, I’ll do $4,800 SHIPPED & INSURED

Can't she just change her pronouns and force everyone to fake pretend with her?
Or maybe Michelle O. could loan her one.

Possibly hacked

I won this Cert at a NRL hunter match earlier this year. I called to confirm its good for a chamber, thread and cerakote job for one barrel. They have a number of barrels in stock or you can send one in. Cost is about $500 for all of this.

I would like SOLD for the Cert. Its from Owens Armory in AZ.

PM me with any questions.

I have a like new Gen3xr for sale. Its only been mounted a handful of times.
Pm me and i can provide photos..
3900 shipped!

Will shooting cheap ammo (pmc bronze) in a custom built rifle, have any ill effects on the rifle itself?

I just built a custom 223, and have a ton of pmc bronze 223 at the house (1000s of rounds). I know it will not shoot amazing, just to get out a few hundred yards on steel.

Hello, I’m making room in my safe for other projects and need a few things out of the way…

Swarovski Z3 4-14X50-L-BT : 4w reticle-$1,000

Christensen arms CA 9mm 7.5 AR pistol tungsten cerakote only one box fired through-$1,400

AR-10 POF Rogue .308 12.5” pistol, 42round count-$1,500……shoots 168 fgmm great!

Ruger precision .22 60 rounds of premium ammo ran through - $350

What’s up fellow hide members I have a new never fired bergara b14r and The gun was pulled from the box and dry fired on snap caps. I swapped the trigger when I first received the rifle to a timney Calvin elite and added the area419 rail. Selling as a whole. Will not separate anything.

bergara B14r carbon
3 mags
Timney Calvin elite
Area 419 20 moa rail

$1200.00 firm


I also have a Savage 93r 17hmr Heavy fluted barrel with a Boyd’s tacticool stock.
Dip bottom metal
Dip 20moa rail

$400Firm
Thanks!

Up for sale is a Sig Cross 18" 6.5 Creedmoor with a Vortex Razor HD LHT 3-15x50 on top. G4i BDC reticle and second focal plane. Nightforce ultralight rings, annex defense 4" arca dovetail so it's tripod ready. Insite Arms 6.5mm Heathen brake also included. Original magpul magazine. Shot 135gr Berger Classic Hunters at 2665fps very well. Exactly 126 rounds fired.

Set this up for the upcoming hunting season for my kids as a lightweight hunting rig. Decided to go a different route. Bipod not included

SPF
Shipping is to continental US.

Delete

I have been struggling with carrying while backpacking since I decided to go away from my G42. I would like to move to a larger frame gun (like a P320 / G19 size gun). I am carrying a multi day pack / load so I have a hip belt on the pack that is tight which blocks access to a belt carry in all but appendix, which worked fine for the small G42 but a larger frame gun is kinda in the way and starts to chafe after a while.

I don’t need the fastest access, but I don’t want it in my pack either. A drop leg rig would be ideal but I do see other people on the trail, so that is out. Let me know how you do it.

If it helps I am a very thin guy, so there isn’t much padding on me.

Getting out of reloading as I never really have time for this hobby. So here I am clearing out the equipment. All prices are shipping included unless otherwise stated.


Press:
- Almost like new Redding T7 turret press. This has loaded less than 100 rounds really. This comes 1 extra turret, Inline Fabrication Mount, quick change plates, Ergo Roller Lever, 2 ammo bins, 3 RCBS shell holders. This is a $700 plus package. Asking $600 local pickup only as shipping cost will be outrageously expensive due to the weight. SOLD

Dies:
- Redding 39327 National Match 300 Blackout die set. Asking $250.
- Redding Full Length Sizing die with bushing. This comes with 3 Redding bushing (.335, .336 steel, .337 titanium nitride). Asking $120. SOLD
- RCBS Matchmaster Seating die 308. Asking $85. SOLD
- RCBS Primer Pocket Swager. Asking $20.
- RCBS Bullet pullet with Collet. Asking $35.

Misc:
- RCBS Deluxe Check Weight Set. Asking $70.
- Redding Competition Shell Holder Set #10. Asking $65.
- Redding Competition Shell Holder Set #1. Asking $65. SOLD
- Hornady Sure-Lock Rings 2 x 6 pack.. Asking $35. SOLD
- Lyman Funnel Kit. Asking $27. SOLD
- Sinclair Concentricity Gauge with dial. Never used. Asking $120. SOLD
- LE Wilson Case Length Headspace Gauge 308. Asking $40. SOLD

Items are shipping out of Rockwall, TX. Local pickup is also available. Any question, please DM, email, or text me at 4six9 seven4eight 7eight7eight.
Also please check out my bullets listing with Hornady Sub-x 190gr, V-MAx 110gr, A-MAx 168, 208. Sierra SMK 168, 175, 220, GMK 165, 200, and Hazmat listing. Thank you.

NIB Leupold Mark 5 5-25x56 PR2 Reticle Mil/Mil.

Scope was taken out of the box to see if it would clear with some 1” rings but it wouldn’t. Decided to stick with what I have. There’s not a mark on it.

Price: $1850 F&F Shipped