Hello all,

I have a Bergara B14 HMR in 6.5cm. I’m loading 41.5G H4350 under 140g Berger Hybrid using starline LR brass. At 100 yards it’s shooting one hole. At 200 it’s shooting 4”. What’s going on? The only thing I can figure is it doesn’t like that node past 100yds. I’m 15-20k off jam (anywhere in that range holds great at 100yds) which is why I thought it’d do well at 200. Any thoughts would be appreciated

Marlin 1895 .45-70


Was originally a classic with a 22” barrel, I had it shortened to 18” and threaded 5/8x24. All metal cerakoted to look like blueing. XS rail and front sight, Primary arms red dot, Custom sling and stock bullet holder.


Asking $1650. Always open to trades if something catches my eye.

I bought the chassis and never used it, I added the adjustable butt plate. It will ship with action bolts.

Arca rail was sold and price was dropped to reflect that.

Like new MDT ACC Elite Chassis with accessories. Had a RimX in it and have used in 1 match plus a month or so worth of practice. It's a black chassis that has had Tactical Blue sprayed down the sides.

Fits Rem.700 short action & clones. Comes with all original parts plus:

- MDT Bag rider
- Jellies
- Complete 5pc internal forend weight set.

Asking $1550 shipped to lower 48.

So brand new M4 build went kaboom after about 4 mags. I didn’t beat on the thing at all. Ran a mag and let it cool down. Yes each mag was a single FRT burst but the rifle took breaks between mags, and ran perfectly until this happened.

During the fourth mag there was a double feed which was cleared but a live round stayed in the chamber. I just dropped the bolt on that live round and sent it. Bad move. Carnage is as follows.

The case is stuck in the chamber pretty good. Any tips on getting that out? If I can save the barrel that would be good. I guess I notify the ATF that this receiver is destroyed and remove it from the NFA?

I’ve got other shit to do today but if you guys can off any advice, I’d appreciate it. I’ll check back in later for sure. Spent a long time and some decent money on this build so this is disappointing to say the least. It looks like BCG, and upper and lower are definitely trash, but most everything else looks ok to include the DTT FRT. I’d like to get the case out of this barrel.

I can hear a piece of metal inside the suppressor as well and there was definitely a strike on the end cap. I’ll contact OCL about taking a look at it I guess.

I have a question for moderators.
Mods please see:

And let me know.
Thanks.

For sale is a Impact marked M5 bottom metal for SA. The latch has been shortened a little to fit AW mags in an ARC CDG. Includes action screws. SOLD shipped, Paypal F&F.

May have used it once. SOLD shipped, Paypal F&F

I currently have a Gen 2 razor on my RimX and I hate the 3 set screws to adjust the zero. I am looking at getting a Gen 3 razor. I like the ebr reticle. For the guys who run the Gen 3 razor do you find that the reticle is too small running 15-20 power. That’s where I run my Gen 2. I had a very little bit of time on a Gen 3 and I kinda felt that but it could also be because I didn’t have a ton of time behind it.

As the title states, a cert for 100% off a TBAC suppressor up to 2500$


1300$

I take Venmo, Zelle and Apple Pay. Can do PayPal but prefer not to use it.
F&F payments only.

Looking to buy some 45acp brass.

I’m selling a gently used Atlas BT72 Super CAL Bipod w/ 2 screw clamp, in very good condition as pictured.
I’m cleaning out the closet, I bought this bipod new, but I just don’t use it much for PRS.
I’m also including the basic Amazon picatinny QD attachment, also pictured.

SOLD
PayPal F&F or Venmo for payment
First to post and PM will own it
Thank you!

The BT72 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”

Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.

It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only.

• Height Range: 5.6 – 10.8” (7.5” at 90°)
• Preloaded Cant: 63 degrees
• Position Button: 0.5″ diameter
• 5 leg positions: 0, 45, 90, 135 & 180 degrees
• Non-Rotating Legs: outer leg does not rotate around inner leg
• Weight: 21.54 ounces
• Footprint: 14.75-19.37″

I could use some advice. I have 3 Dead Air suppressors; Sandman L Key-Mo, Nomad L DT and a Nomad 30 DT. I bought the Sandman L and Nomad L first and they shoot great on every rifle I own. I picked up the Nomad 30 most recently and the groups are usually double the normal size when I use it. I have tried it across 5 rifles and 4 calibers, it is always double my usual dispersion or more. The groups seem to throw flyers every other round.
Is this something that might be covered under warranty or is it just bad luck and I need to deal with it?

Like new MDT SA chassis, bought and never used.

curious as to how I can rezero the turret scales on the g3 razor, On my g2 I just loosen the 3 screws lift up and put scale to what ever I want. have tried to lift the scale on the g3 but will not work. Has anyone been able to reset their turret scales[for lack of proper terms. stan

Good condition, shows a little bit of wear. SOLD shipped, Paypal F&F

Selling a Vudoo V22 barreled action. Barrel length is 18” and measures .88 at the muzzle. Barreled action includes a trigger tech diamond 2 stage trigger and 6 Vudoo mags. I’m the second owner of the rifle so I don’t have an exact round count on it. I’ve owned the rifle for about 2 and a half years and have shot 3 NRL22 matches with it and probably have around another 150 rounds through it in scope zeroing and assorted shooting. Everything functions as expected and is in good condition. I’m selling as I don’t have time to shoot both centerfire and rimfire comps. Additional photos available upon request.$1500 shipped to your FFL.

I just pulled the following out of thin air, in a text, to a competitive pistol shooting friend. No joke.




Did you hear that they have redesignated the military sidearm formally know as the

"Colt 1911A1"

Government model pistol... & accordingly, it's classic chambering:

45 ACP
(A.utomatic C.olt
P.istol) cartridge?

Yep.

It's the first weapon in the history of the US DOD weapons arsenal to receive a human'like military service medal of sorts, after (both sidearm and cartridge) has served faithfully for over 100+ years in both military war time & peace, law enforcement, competitive pistol shooting in all conceivable forms & loved as well as relied upon by millions of Americans for personal defense... & last but not least, countless recreational shooters, world wide.???

Yep-

The pistol is now redesignated/ called the:

"19'AARP"

and the cartridge, is now the:

" .45 ASSDEPO. "

ASSDEPO being the official acronym that stands for:

Automatic
Soc. Sec.
Dissability
Entitlment
Pay
Out

[after gran'pa caught your punk self in his shed at 0245 tryna steal his lawn mower; him accordingly following his 'drafted into 'Nam training protocol:

B.R.A.S.S,911.

For the uniformed, "BRASS" is the old school USMC shooting acronym:

B.reath

(while)R.elease(-ing)

A.im

S.queeze

S.hoot.

Let's have a round for such a faithful, long serving veteran of these United States, now formally & correctly honored & decorated!

Cheers!

Selling an extra stock I have laying around. EH1, Rem 700 SA inlet, sendero barrel inlet, RH, 3" pic rail up front and two QD cups on the left side.View attachment IMG_5686.jpeg

So I’ve got about an acre that’s full of sumac. I recently cut down what was in a 75’ circle. They’re mostly 1-2” diameter so nothing big.

Ever since, they’re spreading like wild fire.

They’re popping up in my grass as fast as I can cut them down.

I think they’re related to the coyote family and know that the population is down so they’ve increased production.

Trying to get rid of it, I’ve tried burning and the 41% glyphosate shit that you’re “supposed” to mix like 16:1 with water. I went about 50/50 because I’m done being nice.

The glyphosate works on the stuff that I can see, but in two days there will be new growth right next to the shit I sprayed.

Have any of you found a way to kill it off?

I am from Finland, and we have a long, well i would say medium time on the history in firearms, that we have been able
to use suppressor, and for sure they are made to reduce the muzzle blast and reduce the sound.
And this is the purpose of suppressor in these days too.
But in sport shooting, the spotting of the own shot´s in few different competition, or even on a hobby shooter, it is nice to able to spot your own shot´s.
I have seen quite many USA suppressor manufacturers, that offers the muzzle brake on the tip of the suppressor.
We have a coversation on a Finnish forum of this subject, and there are only me and one other guy that do think that the brake will
help to reduce the rest of the gas burst that come from the suppressor, since the suppressor by it self it is not doing the recoil reduce that much, it does
kind of push the gun, and not killing the recoil, like a pure muzzle brake on the barrel does.
But the thing is, how much does the suppressor with a muzzle brake on it reduce the recoil, is it proniment?
I have shot few suppressor that has a muzzle brake, and i can say that it does work.
But since you have more companies and users in USA these days, what is your thoughts of this?
Will the suppressor with a brake make the rifle more stable?

King by him self just made a video about this same thing yeasterday, and i would love to see a longer video from Frank about this subject.

Login to view embedded media

I’m looking to rebarrel my old Tikka T3 243 into something to use as my ranch rifle/truck gun to keep in my rig daily. I’d like it to be as short as reasonably possible, and I’d like to use factory ammo just for the cost and convenience in a gun that will be abused and fired a lot. I’ve got a peak44 stock on the way and a Leupold VX3 that’s been waiting to be put on something. The cartridges I’m looking at as of now are 6CM, 25CM, 6.5CM and of course good old 308. Open to other chambering suggestions as well. Duties will include dispatching coyotes, feral hogs, and whitetail if the opportunity presents itself during season. Likely maximum range on live targets will be 400 yards just given the brush and topography of my place. I currently use a 22CM at 22” but I’d like it to be a few inches shorter for getting it out the truck window easily and quickly. I’d build another 22CM shorter but that’s boring. Rifle will be suppressed full time.

Yes I realize I’m giving up performance with factory ammo and a short barrel but this tool isn’t going to be about maximizing performance, it’s about easy handling and being capable enough to be useful. I know there’s plenty of posts about short barrels but I’m looking for experience specifically with factory ammunition. So who’s running factory ammo in a 16-20” rifle, what cartridge and muzzle velocities are you getting? Have you seen good kills on small to medium size game with your setup?

New LRH – NV mini chassis for short action 700 and clone. Switching my build to something different.

Stock only $1150 shipped !!

$1700 with like new Ckye Pod light weight single pull.

Open to others that I may have missed. I have a TBAC titanium version on one can and a SS Otter Creek on another (latter is not lo-pro), but am interested in canvassing the field.

I’m looking to reduce the OAL of my suppressor a little. Not sure if there’s a material difference between titanium vs SS in this application (besides weight), but I note the SS Otter Creek one seems to have less wobble when spinning it on. Maybe that’s not important?

Must have wrench flats and be DT and want quality (low runout). Price not important.

Kinda attracted to the Rex as it reduces the OAL the most, but I wonder about Rex quality and if the design has some trade-offs (reduces blast chamber too much, maybe?).

Razor Gen II 4.5-27 MRAD FFP Tremor 3. Very good overall. Glass is perfect. Bell is clean. Has a screw mark on tube from a mounting mistake. Illumination seems weak but maybe it is just this reticle compared to heavier reticles. FFP, Tremor 3, box and papers. $1399 shipped