WTS or Trade my NXS F1 3.5-15x50 MIL-SPEC, H58 reticle, illumination works perfectly, glass is great no scratches just a little dirty, scope body has some superficial rub marks and scratches but nothing that impedes function, scope tracks perfectly.

$2200 obo shipped
OR
trade for 4-16x42 Atacr F1 mil-xt or mil c

Up for sale is my Tommy Built T7 in RAL8000. It is in fantastic condition, I have about 100 rounds through it, the mag release has been replaced with the updated one, bolt has been replaced with a newer one from TB.

The package includes the folding grip, stock, German back plate, pistol back plate, old surefire light (doesn’t work), backpack, 30rd & 40rd mags, extra charging handle.

Currently on form 1, I will send a letter to the ATF to have it removed from the registry upon receiving payment and return it to pistol configuration.

Edit: Adding 800 rounds of ammo to package.

$5000 shipped

I am trying to decide between RimX, Vodoo V-22 and new, soon to be released Tikka T1x ACE. I know Tikka hasn't been released, I have Tikka T1x 20" in MDT Oryx chassis (see the pic below) and it has been very accurate, so I am leaning towards Tikka T1x ACE. Is RimX or Vodoo give me better accuracy than Tikka ? What's the consensus of RimX vs Vodoo in terms of accuracy?
I am not planning to compete much, maybe some. This is more for benchrest shooting, plinking and similar activities.

For sale, Nightforce ATACR 4-20x50 MIL-XT reticle. Great scope and only mounted for a short while and shot a handful of times. Condition is excellent. The only thing that stands out to me is theres a couple small snail trail type markings on the detachable sun shade. Otherwise, all good.

$2250 Paypal F&F / G&S (Buyer pays the fee), would consider venmo or cashapp as well with established members if they want to use these.

Thanks for looking!

First up is the Remington Defense CSR in .308 with a 16” barrel. Rifle has approximately 150 rounds through it, the muzzle brake was swapped with a Dead Air brake, and the grip was swapped to a magpul. Rifle comes with everything from the factory, roll up bag, barrel wrench, manual, magazines, Harris bipod, and extra ergo grip.

$27.5k $26.5k Shipped

——————————————————————

Remington PSR

$22.5k shipped SOLD

——————————————————————

Remington Defense USSS Trials upper

$1750 $1500 shipped. SOLD

I am open to cash offers, no trades at this time.

Working on my new 6GT build and discovered a few issues I could use some advice on:

I think AT-X magazines will not work (technically I guess they are different than AW) in an MDT Chassis. Not a Huge issue, I only have the 1.

I also notice AICS mags are a pretty tight fit, and hard to get seated quickly and reliably (yes moar practice!)

AICS Mags give me problems with a fully loaded mag (10 rounds). The first two rounds will 'bind' or 'nosedive' aka they gett stuck in the mag and there appears to be too much tension (guessing here) to allow it to nose up into the chamber. After those first 2, everything is golden. I was doing load testing but my plan for the PRS matches is to just use a 12 round mag or maybe load 8 (I rarely get to 10 being old and slow). These are will seasoned mags I used with 308/6.5 and no issue.

Any advice would be welcome.

Purchased on 1/23/2025 for a rifle used for my department. Department is switching to 6.5 creedmoor so I no longer need this. 60 rounds of federal gold medal down the barrel. Purchased out the door for $1060 from Europtic.
Here is the exact title from Europtic
1420082GR-AI - Accuracy International AT/AX Sage Green .308 Win 20" 5/8"-24 w/cap 2018 Profile Barrel 1420082GR

Price is 700 shipped, buyer covers PayPal fees

M40A1 ish Barreled action, built by Eric Reid while he was at GAP. 6 digit serial, Schneider barrel, tombstone safety walker trigger cut for A1 bottom metal. It’s an -Ish because it has a thicker lug and doesn’t have the thumb cut for an A1, but otherwise awesome action and looks really good in an HTG stock. Has a ton mark on the barrel (pictured) but otherwise in good used condition. Round count well under 1k.

$1500 shipped, payment via PayPal F&F, Venmo, Zelle, USPS MO. SOlD

Chassis has a few hundred rounds through it. All barrels have less than 200 rounds (acquired used) except 6.5 carbon barrel has less than 50.

Fde firing pin assembly

338,308 bolt bodies

proof carbon 6.5cm barrel 24in 5/8x24

AI 308 barrel 24in 5/8x24 black

AI 338lm barrel 27in fde 3/4x24

1x338 mag

3x308/6.5cm mags

Keeping it all together for the moment

$11300 shipped

NO trades

So….entering into my pre-geeper years (62), and looking to rest / massage these tired muscles. Scoping out a hot tub. I can’t find a legit answer on salt water tub vs conventional. Those who sell salt water say they are THE shit. Those who sell conventional say salt water tubs ARE shit. Anyone here have any experience with either. Looking at Caldera and Cal spas. 2-3 person. No sex parties with the neighbors in a 6 person…..just me and the Mrs.

Hey. I hate that I have already sent the rifle off without getting to try my Griffin PSR can I had BSD Fabrication jail break for me to us with the CA762SSAL/RE flash hider. He used one of his warlock mounts which uses an 1.375 x 24 thread and I am sure if you wanted him he does the warden conversions and could use it. Only thing we did was put a tiny pin on the underside of the flash hider so it locks into the grove that a new style SureFire would use. It’s barely noticeable. Once again I wish I had a picture before it left to get a little repair work done.

I just wanted to share he did a real nice job was easy to deal with and did a good job of keeping me updated and did not mind me asking questions. I just wanted to share in case someone was looking for away to get a suppressor for their older style mount. I will give a complete update when the rifle comes home and I get to go shoot it. But here’s a few pictures.

It will need to be Cerakoted once I get it tested. Or I’ll just buy a mirage cover and won’t care because it will be covered up.

In good condition, glass is excellent. I took a picture of every blemish I could find on the scope, didn’t find any on the glass, lumina caps have been on since day 1.

Scope with Caps $1800. If you want the ARC rings add $140.

Like new condition Tangent Theta Gen2XR.

Includes MkM scope caps, anarchy outdoor throwlever, removable turret tape, ARD, box and manual.

Asking $3350 shipped

My local Gun guy is selling a Chinese NDM-86 Dragunov rifle. It has 3 magazines and is the cleanest one I've ever seen. It is a KSI import with absolutely beautiful wood. Currently has it listed for $10500 but think he has some wiggle room. Wish I had the money but I don't. Let me know if you're interested and I'll forward his info to you. Thanks

TacSport Pro single stage
Used but still in great shape. Pulled this off my RimX and has the low sear installed.

$150 shipped conus

Would this be a suitable scope for PRS or Long-range varmint Silhouette competition? How does the glass compare to a Nightforce Atcar 7-35x56mm

I have a bergara ridge sp in 223. Shoots great with factory stock but I prefer vertical grips and honestly, the look of chassis or aftermarket stocks.

I'm torn between a krg bravo and a ag composites armor.

My only concern is feeding from aics. I had a newer remington 700 that the mags from krg wouldn't feed last few rounds. they'd nose dive.

So what would you do?
Option 1: get a bravo and mag with extended latch and hope for the best while trying different mags

Option 2: buy the ag composites fiberglass stock without cheek riser and bdl and know it will feed but have to load from top all the time

Theyre roughly the same price and I only use it coyote hunting and off a bench out to 600 yards. No matches that require a mag.

Id also note that even with a mag I single load often, maybe that's because the one I had didn't feed lol

Hey guys, sorry for all the tripod questions. I thought I knew what I wanted, and then went down a rabbit hole after rabbit hole. I had no idea this topic was that deep.

So I'm here to take a step back and ask what I probably should have asked first, since I know next to nothing on the subject.

What would you guys recommend as the best bang for the buck tripod under $400. This is just the tripod legs, not a head. This will be used standing up and sitting down, and shooting and glassing with binos. This will prob be my one and only do everything tripod for the foreseeable future.

It's very overwhelming how many options there are. It seems like there's a big difference in heads, but I'm not so sure how different the actual tripods are. They all seem to be made out of relatively the same thing, and made mostly the same way. So maybe the legs aren't that big of a deal? You tell me.

So far, my best idea is the Aziak Front Country at about 350$.

How would you spend my $400?

Hello to all,

I was wondering if anyone has done business with this company https://21stcenturyinnovation.com/, have you purchased anything from them?

I ran their site on a website validator and it gives back 61.5% that they are legit.

Thank you, Steve

For sale, CZ 457, Mueller works barrel[thermal fitted] 419 15moa mount, Manners TCS stock w/Sikes rail, Timney trigger, L3I bottom metal, 4x mags, full weighted 419 arca rail. Around 3000 rds, 1 hole rifle w/lapua long range. Supremely accurate, just got out of 22.
$2400 shipped to FFL

Have a barreled cut by Kenny, it's a hammer. Have won many matches and set my PR of 800 yards with it. Barrel is a Shilen select ratchet, 20 5/8"

Barreled action only.

Asking 2150.00 shipped SPF.

Trigger, Stock, and Scope not included.

I have a Kreiger 224 MTU profile barrel blank.
Anyone recommend a good gunsmith or company that can turn it into an AR15 20" barrel? Install the barrel extension, gas port, etc. Thanks in advance.

Interested in selling or trading my AIAX in 308 with Nightforce NX8 4-32 F1 Mil-XT.

20" barrel, non quick lock, less than 1k rounds down the pipe. Shoots great with just about everything I've tried.

I specifically want dual NV. BNVD-SG, ARNVG, 1431's RNVG etc. WP or GP, prefer manual gain and autogated.

Package $5500 in trade

Will also sell -

Rifle - $3500 shipped
Comes with one 10 rd mag, AI buttspike, extra LOP spacers and 3 rail sections. Will ship in a cheap hard case from my FFL to yours unless you're a TX resident and we FTF.

NX8 - $1900 shipped with NF mount. Have the box somewhere. Rifle must sell first.

When other black athletes were raising black gloved fists in protest at the '68 Olympics.