Kenny has been burning the midnight oil….., just got permission to post these.

Looking good. Can’t wait to test the first full prototype very soon.



The programming is set and just a few finishing touches to go. Start saving those pennies.

I fucking hate these people. Today I met my daughter for breakfast. We walked my granddaughter to school then went to a local place and had a meal. We are sitting at the counter. There are three empty spaces in each direction and having a chat.

15 mins into the meal a tattooed, ear gage, nose ring faggot from the local private college plops down dead assed next to me. Then he starts moaning like a two dollar whore about me crowding him. He's damn near yelling and rocking back and forth and I'm ignoring him until he elbows me and loudly repeats his bullshit.

I said politely, " Go fuck yourself asshole, you fucking plopped your faggy ass next to me." If you don't like it fucking move your ass. There are two empty seats beside you. He yells, " Are you going to pay me to move? I said, " I'll pay you to fuck your own face". He started next with how he didn't like my language. I laughed and said I didn't want monkey pox, so if he moved I'd feel safer.

After some whining, this fuckwit finally shut up and went about his day. Never moving from beside me.

So what's was the problem? How the fuck do I know. Mostly it appears my carhartt shirt and looking like a Trump voter set off a leftist from the nearby liberal arts college.

Fucking assholes.

And none of you HSLD guys better buy all of them. Not sure how I’m going to afford it but I guess I can eat ramen and tuna fish to save money.




Counter Sniper doesn’t have shit on this one. Glad Guns.com was in my inbox this morning.

Here’s the link
Elite

at each other but no nukes as of 4:50 pm

I've been using an MPA comp chassis since I began shooting a few years back. Lately I've just not been happy with it or maybe I just want a change for no real reason. Anyway onto my actual questions.

I shoot primarily team sniper type comps and PRS. I'm thinking I'd like a lighter chassis for field matches and a heavier chassis for PRS that I could just swap out. I've been looking at the KRG and MDT but never held or shot them before. Tell me what y'all have. Give me feedback on what you like about them and pictures get bonus points.

Hey All,
attempting to sell 2 LNIB Lepold mark 4's both pr-2 reticle (One mil and one MOA). The NX8 is NIB with MIl-C reticle FFP and comes with the Seekins Mount.
No Trades at this time and am only looking for cash.
Mark 4's -$975 each
NX8 with mount -$1900

ONLY MARK 4 PR-2 MOA LEFT.

ALL SOLD

Photos

Brand new ambi lower, it was part of a complete rifle I purchased.

$1100 shipped
Zelle for payment

Arken & DNT are Back In Stock

Just wanted to give a heads up, as it's been a little while.....We have started getting nice deliveries from both Arken & DNT. If there's anything we can answer for you, or assist you with please give us a call, 516-217-1000

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

I have four rifles available from left to right -

Zermatt TL3 .300 PRC
SJA barrel
Hellfire brake
TriggerTech Diamond Pro Curve
Manners stock
Hawkins M5 DBM
Vortex Razor Gen 2 4.5-27 MOA
Spuhr Mount
Less than 100 rounds through the barrel
$6,200

Impact 737 .22 ARC
Foundation Exodus with custom paint from Foundation
Timney two stage trigger
Hawkins M5 DBM
Proof Competition Contour chambered in house at Snyder Precision
3 rounds down the tube
$4,000

Zermatt Origin LA 30-06
Short Action Customs chambered Bartlein barrel with 80 rounds through it. McMillan Game Scout stock
TriggerTech Special
Hawkins Oberndorf BDL
SOLD

Zermatt TL3 .300 PRC
Proof Carbon Fiber prefit
TriggerTech Diamond
KRG Bravo with Spigot mount
Hellfire brake
Vortex Viper PST 5-25 MOA
Vortex precision rings
$3,500

Rhinos once again holding up the hearing protection act Hr404 and hr2395 being held up in commity by some good ole rhino action. Who claim, "it's not the time."

Held hostage in commity by Rep Jason Smith Missouri life time NRA memeber.

Call (202) 225 3625 ways and means commity to voice your displeasure.

2000's serial numer RimX 30MOA rail
MDT Elite Chassis with rubber dampners
Trigger Tech Diamond trigger
20" Bartlein M24 16 twist threaded 1/2x28
Manzella Precision
22lr Match Eachus Chamber

This gun is a hammer with CenterX and all SK brands
I picked up a 1727F, so I am selling off a few rifles

$3350 shipped to your FFL

$2400 shipped and insured to the lower 48. It's raining today so there are some drops of water on the box.

This is the way

Pretty much Brand new AMP Mark II Annealer

pilots are B29, 20, 73, 3, 17
$1750 shipped

​

Leupold MK4 HD 6-24 MRAD PR2 reticle like new with the boxes x2 $1000 each

I have two used, but in good condition Area 419 arca clamps to sell. These include the locking pins, asking $100 shipped for the pair. Let me know if you have any questions. Thanks

Right hand Manners PRS-1T (w/ thumbshelf) for short action R700/Impact 737R in Elite Black Forest camo w/ Manners Mini-Chassis. Also included is an Area 419 14" Arcalock arca rail with removable barricade stop and SAP 2-round holder. There are 2 removable LOP spacers installed for a total LOP of 15", as well as 2 QD flush cups on the left side. The barrel channel is 1.375" wide at it's narrowest point, so it can accommodate pretty much any barrel contour. Weighs 4lbs as you see it.

$975 shipped. The stock is in overall great shape. Will require modification if using an action with a swept bolt handle. Works fine with a straight handle, like Impact, Zermatt TL3, Terminus, Curtis, Surgeon, etc. Please PM for more pics or further details as well as if you'd like to talk/text/FaceTime. No Trades please.



Thanks!

BT65-LW17 CAL Atlas Bipod - with ADM-170-S

I purchased this brand new from EuroOptic. It is lightly used, and when I did use it, I had the legs wrapped.

$225 Shipped CONUS

Got this gun from a member on here, it shoots 1/2 with factory frontier ammo, I’ve enjoyed it but do not use it as much as i thought. Approx 17 rounds down the pipe. Gun was built by straight jacket armory , Aero action, carbon barrel, have a flush HS mag and extended magpul, manners stock, triggertech trig, 2800$ to your door with ep5 optic mounted. 2300$ without.

Will entertain trades for other bolt guns in a magnum cartridge, i like chassis guns.

I've got an Impact 737 I am thinking of sending in to get cut for AW mags. Corrosion resistance is pretty important where I am at.

What are people doing for coating after having action work done? It is already nitrided- I don't know that I can nitride it again. Hard chrome? PVD? Cerakote? At some point it may make sense to just sell it and pick up a factory AW cut action, but being in CA that's a bit of a pain so I am trying to figure out my options.

Any rock collectors?

I have always thought unique rocks are cool. But never learned much about them.

Feel free to post cool rock pics.

Anyone know what BA after the Hornady UPC means? Assuming it’s GAP
Had an interesting day shooting today.
I’ve been breaking in my 6GT with factory H109 ammo.
In the past was only getting about 2780fps from them.
Was hoping the barrel would speed up quite a bit, but the rounds are stupid accurate.

Fast forward to today. Grabbed a couple boxes from my stash and went shooting.
Garmin immediately read 2960 for 20rnds
Looked at the box and saw GA after the UPC#
Compared old box to current box. Primers in the fast loads are gold/copper and barely have primer marks on them.

Here’s some pics for reference.
Any help to solve the mystery would help. Thanks Hide.

MDT ESS chassis for sell. It is for a Remington short action. It also has the updated thumb screws for the cheek rest and but stock.
Asking $800.00 shipped OBO.

I'm going to regret this. But I bought this with some ideas of competing and in reality they won't happen due to schedules. My summer was supposed to be free but now I'm working every weekend I'm not traveling.

Only looking to trade for something that I'll use for hunting. Seems to be the only time I get out nowadays

Defiance deviant action built by Joe walls
Bix and Andy competition trigger
4 barrels all kreigers:
308 m24 or MTU contour 26" - throated for 185 juggs (500rds)
6 creedmoor rem varmint - 24" (75rds)
6 creedmoor rem varmint 24" (new)
6.5x47 rem varmint 26” (new)
All threaded 5/8"-24
All are cerakoted black
Xlr Element 4.0 w/ MDT grip, bag rider, thumbrest

Still unsure on this, as I may just end up cutting down one of the 6 creed barrels and keeping everything

Would sell for $2400 + half shipping (will be two packages)
I will hold off on selling for two days with preference to trades

Trades:
Custom clone 700 action or tikka
18-22" steel barrel lighter contour
Caliber must have factory ammo availability -6cm to 300wsm preferably

Foundation Gideon
Manners PH w mini or micro chassis
Manners LRH w/ mini or micro chassis