Login to view embedded media
Don’t try and expand your lawn service into new territory that is currently controlled by the illegal crews run by cartels and coyotes.
Not without paying some protection/ bribe money up front to the local constabulary
You won’t just be arrested on false charges , o no they will boot your door and let their attack dogs maul you for 15 minutes.
Gonna have to write a lot of tickets to replace the bribe revenue that protecting illegals has brought in . Like more than the $9 billion tickets bring in now

Gen 2 PST 3-15x44 with the EBR-2D reticle(which was only available for a limited time through certain vendors I believe). Mounted on a 18” AR for midrange work and has been great in that role. Im turning this upper into a designated thermal upper so im looking to recoup some funds. Its in a Warne 20moa mount and would like to sell it together for $500 shipped but will split if I have too. Glass is clean and the only marks on the scope are on the battery cap and elevation turret from using a coin to remove the caps. Feel free to message me for more details.

I’m currently assembling a rifle for my daughter and I (she’s 9) it started off as a bergara b14r in a MPA BA comp chassis and I’ve been spotting her impacts more than I’ve been shooting lately lol. So the plan is to drop a 6.5 creedmoor barreled action into the chassis and extend our ranges a bit.

-Gun Details - Will be a competition contour 6.5 creed 26”, MPA BA chassis, big horn orgin action etc. I want it 20lbs+ so she is extremely comfortable behind it.

-Shooting style - We don’t compete we just shoot for fun. I want the 6.5 CM to be a 1000 yard and in gun for her and my plans is to later have a 7ss, 7saum barrel spun up and stretch out to a mile.

-Conditions - We shoot no matter rain or shine but the optic must be good in low light as this will serve as a deer hunting gun as well (we shoot from a bench and tripods) we rarely walk over 100 yards to a stand so a heavy gun will not be a problem.

-Specifications needed - Needs to be FFP and in mils other than that the heavier the better. Considering the 7-35 magnification range this go around.


My experience with good quality glass is a leupold Mark 5 5-25x56 and a few lower end Night force scopes. The mark 5 does everything well so I would like a scope at least on par with it or a slight step up.

It looks like all the Optika scopes are discontinued. There’s some new MeoPro and MeoForce scopes available. How are these in comparison to the Optika line which were good values? The Meopta website doesn’t tell you much and requires you click on the whole catalog to learn anything useful.

maybe @koshkin knows something?

Really nice Manners LRH SA inlet no mini chassis. Bedded for an Impact 737R by Radix Precision, the cerakote is TS Mirage done by Primal Rights. Finish is in perfect shape, one of a kind for sure.

$1000 shipped.

1:10 twist AI factory barrel .308, 16.5 length. Approx 1k rounds on it, plenty of life left on it. Black, has a few handling marks.

650 shipped

Selling my TiN CHAD Muzzle brake serial number 4.

Few dings on the tuner from matches and scratches on the lock nut. Nothing wrong with it past that, just moving to a CHAD without a tuner.

$450 shipped

Honestly he doesn't need us to defend him. However, when you hear people bitching about oligarchs remind them of a few things.
George Soros
Michael Bloomberg
Peter Theile
Bill Gates
Bezos's ex-wife
The Clintons

Do not let the propaganda machine make you forget purchased DA's, paying for oppositional candidates, censorship, stealing the Democrat primary..
I am sure I forgot some. Feel free to add to the list.

Howdy Gents, I’m looking for a budget target rifle for the wife in .243 or something close to that with low recoil. Let me know if you have anything like this taking up space in the safe .

Mpa matrix pro 2. Rem 700 short action Brand new in box never even had an action mount in it. 1250 shipped.

I should be thrilled that this chronograph is finally on sale. I've been planning on purchasing one for quite a while. But I get a little skeptical with a manufacturer sale that appears to be at every retail outlet.

Does anyone have some inside information, or suspect, that Garmin is liquidating stock so that they can then release an improved, updated version?

Is it recommended to run an alcohol soaked patch through your barrel as the last step in the barrel cleaning process?

Pitbulls are adapting and their methods are evolving.

Brand new Manners Night Stalker in High Plains gloss for R700 SA. Comes with the NVG top rail and screws. Bought two and decided to only use one.

$1500 shipped.

So lots of talk last few days after the Heritage foundation discovered that the only document Biden signed as president was the one where he quit the race.

Every single other bill and executive order was signed with an auto pen.

As folks are saying, whoever controlled the auto pen controlled the presidency And people are coming forward to say that Biden didn’t remember signing things even days after they were signed.

So the chatter is all about whether auto pen signing of bills is actually legal. Or whether Biden‘s entire history of executive orders and signing legislation is vacated.

I suspect it’s a Supreme Court question. Or is it? What’s the precedent? What’s the law? If it says the president has to sign bills for them to become law. If the president doesn’t sign it then how can an order or piece of legislation be valid?

Somehow, I think overturning an entire presidency might get a little bit weird constitutionally. Then again that’s what the constitution is for!!

Does an auto pen controlled by someone who is not the president suffice for executive orders, pardons and Bills?

Is there a precedent? For example, when Woodrow Wilson was president following his stroke, his wife pretty much ran the presidency. Does that constitute a precedent that would allow Jill or some staffer to use the auto pen?

Love to know what our legal minds think!!

Sirhr

this could go in the Ukraine thread but it goes to my more gen ? i know it is early in the trump admin,that there are many huge probs he inherited,i know he is getting insane push back from the left. i still have a concern about several things,this being 1. Putin has said no temp cease fires only some final result on acceptable terms to him. that makes sense in context here.
IMHO any aid to Ukraine at all should be stopped now and forever. resuming mil and intel aid seems like a red flag waved at Russia. can't see how this aids a peace deal. we should stop all aid and offer to broker a deal-nothing else.
of course all "aid" should be stopped going everywhere. we are way more than broke. we need funding here,which is a separate discussion. RFK backing off on MMR vaccine is another ? i have.
grabbing a few thousand illegals is under achievement i think. i have lost a lot of confidence in many of his chosen helpers.
it just appears that many campaign commitments to action have gotten sluggish.
is this being unrealistic and hoping to see too much sooner than possible? yea,i know my concerns are of no importance to the rulers.

The rifle is a Bergara b14 hunter, I used it hunting for many years, it took rain, fog, snow amd blizzards. After an hunt in rough weather i always cleaned the bore but I have to admit i never babied it. Since I go hunting at least 30 times per year and i take one animal more or less everytime, sometimes hunting 3 times a week during autumn and winter, of course it was impossible to clean the bore to bare metal everytime i shot. I preferred to keep accuracy and POI consistent keeping the barrel fouled. I stored it always in a humidity controlled room. There is absolutely no surface rust, even where the finish of the rifle went totally off for rubbing against the backpack or against my body. It has shot more or less 500 .308 win factory rounds and it is still very accurate, shooting easily 0.3 MOA with a couple factory loads.

After all these years i decided to clean the bore to bare metal since this rifle is going to retire for a while and it will be used only occasionally from now on.

I found this spot with what looks like pitting/corrosion more or less 15 inches from the chamber (it is a 22 inch barrel). There are a few other spots looking like this but smaller than this one in the same area of the bore. The rifling looks good in the rest of the bore and it wasn't difficult at all to clean all the fouling and copper.

I am not worried about this because the rifle shoots very well and this spots are not located in the most critical portion of the bore but i am curious about what could have caused this. It is a button rifled barrel and it was the first time i borescoped it.

Thanks for the input guys!

Selling my ZCO 840 MPCT2 15 mil locking turret scope. Still have the box and will come with ZCO scope caps and sunshade and everything else that was included in the box. Been used and has some very minor scuffs on it included in pictures. Glass is still perfect and scope functions flawlessly. $3700 shipped. Only trade I’d make is a Kahles 328i DLR LSW plus cash on your side.

Used Leupold Mark 5 HD 5-25 PR2 Reticle. Come with DI wind dial and the original capped windage put into the box. Setting in an MPA 0MOA 1.250 mount. MKM aluminum bubble level. Paypal F&F for payment and can try to make other payment processors work if needed.

I have 3 of these all the exact same except one if missing a front scope cap. I will sell more than one in a package deal if you like. They all 3 run/track well. I am just upgrading to 40x scopes

Wife and I watched it last night, both thoroughly enjoyed it. Both of us thought it was well written and casted (wife is a big fan of Neal McDonough so getting her to watch wasn't too hard)

For such a small company, Angel Studios has really been putting out some damn good movies...Sound Of Freedom, The Shift, Bonhoeffer....all been damn good watches.

Looking forward to watching Homestead: The Series, looks to be a good continuation of the movie.

There are few creatures as beautiful or as deadly as the cobra.






Naturally, men of our stock are attracted to such critters and for millennia have asked themselves "if only I could harness that beauty & lethality"...and our ancestors have forever thus tried to tame the beast only to find out generations later that the cobra cannot be tamed and once more-we found out that they're quite prolific and reproduce far faster than anticipated.

Did you know a single cobra can lay between 10-30 eggs? I didn't before going down this noble endeavor and before I knew what was happening- I was left with a snake pit as deadly as they are beautiful...








I sought to my elders, I looked towards our ancestors on how I could possibly reign in this den of cobras and wield their strengths while understanding their potential for harm and also appreciating their beauty and suddenly a solution was presented from of all places but the jungles of Vietnam...

I needed a bonafide snake-eater to watch over the rapidly growing snake pit... I searched high & low and found myself a true champion to watch over my flock...







Pictured above is my snake pit- a CCO, Kobra Carry & Kobra Gov't along with my latest addition to the Ed Brown Collection, a Gov't Special Forces model.

-LD

SOLD

New in box Aero Solus receiver in PVD FDE. 223 bolt face.

Sold. shipped to your FFL. No trades.

I have a cert for a Ruger PC Carbine Model #19122 9mm for sale. https://ruger.com/products/pcCarbine/specSheets/19122.html?buy=1

No expiration date, redeem directly with Ruger.

I will email a photos or scanned copy and priority mail the original to you. I accept most payment methods except usps money orders. Can meet local in St Louis Mo or potentially between STL and Columbia Mo.

street price appears to be $720-$750, I’d like $650/obo for the cert.

**********

5x5 crush it timer with spuhr attachment
$75 shipped to your door

Looking to sell or trade my 6.5 Cross. Rifle has exactly 20 rounds fired through it and is in great, a couple of handling marks but otherwise like new condition. I can text a video of it if interested.
$1375.00 shipped
Trades:
Seekins DMR 6mm arc, I can add cash for the right deal.