And it will spill into US.

Rail strikes are huge hits and rare.

Even if they resolve it instantly, it will take days to get the system re booted.

Buried in the DNC joy… This is worth taking note of!

Sirhr

COCHISE COUNTY AZ, 08/23/2024

..."I've heard about that. But I have to do my job. It's a job. It's a dangerous job, but I have to do my job."

-President Donald Trump when asked by a reporter about the ongoing manhunt for 66 year old convicted child rapist Ronald Syvrud who had made threats on Facebook spanning a period of 2 days to kill Trump as Trump stopped at Arizona as part of his campaign tour and also to visit the border region. Syvrud was taken into custody without incident by Cochise County deputies after a 6 hour manhunt in the wake of the threats. In addition to being convicted of 2nd degree sexual assault of a child, Syvrud was also found to have multiple other charges and outstanding warrants including one for violent assault upon his booking and processing.

This comes just days after Trump's previous spectacular campaign stop in North Carolina, where he vowed to pursue much tougher penalties for child rapists and child traffickers up to and including the death penalty. Donald Trump also promised to reinstate EVERY servicemember of the US Armed Forces who had been kicked out by the Biden-Harris administration for refusing the COVID vaccine and they will be reinstated with full honors and back pay.

TO CATCH A PREDATOR: Ronald Syvrud, 66, Benson AZ









Login to view embedded media
Syvrud is a leftist loon as well... Archived screencap of his past X activity.



ARTICLE:

Probably a rhetorical question

I use this app when on personal travel returning to the USA.

Looking at the privacy policy I see a rather vague statement about data linked to me…(“other user content”)

I am wondering just what access I gave to the government when installing this app

I want to upgrade from my PSA bargain basement rifle.

What mid-range price AR ($900 - $1300) would you choose for a defense weapon?

Why would you choose that one?

Are there any I am missing?

New to the hide and hoping to get some help and instruction and ideas.
I am trying to find an accurate hunting load for my 6.5 CM using 143ELD-X bullets, Hornady Brass, Win LRP, and H4350

I have watched a ton of load development videos and read a bunch of articles on it and am still having some issues finding a constant load.

I did a 10 shot ladder load with a COAL of 2.800.
Velocities from my Garmin Crono were below with grain weights

1-39.7-2605
2-39.9-2603
3-40.1-2623
4-40.3-2645
5-50.5-2647
6-40.7-2664
7-40.9-2678
8-41.1-2687
9-41.3-2687
10-41.5-2716



So I picked the higher node as the velocities were identical on the 41.1 & 41.3 charges.
I loaded 5 of each for 41.1, 41.2 & 41.3 and ran them through the crono again.

This was the data i got.



the 41.1 load had about a 1.75" group for 5
the 41.2 load had a large vertical string of about 4"
and the 41.3 load group had about a 1.5"

My thought was to adjust my seating depth on the bullets for another 41.3 grouping and see what it gets me as it was the "more accurate" grouping out of the 3 and I might have pulled a round when it was shot.

Was hoping that some of you all with a ton more experience than me might be able to help.

I have seen some other types of Load Dev on other sites that I am also experimenting with, but I am still very skeptical of those type of development platforms.

Im not shooting benchrest or anything, but would prefer to have an accurate load.
This particular rifle will also shoot a 3/4" group with Factory Hornady Precision Hunter 143Eld-X so I know the rifle is capable of better than what I have got with reloads so far.
So what would some opinions that you all could give or some suggestions.

Howdy y'all. Maybe a silly question, but I can't land on a decision by myself so hoping that you can help out.

Current long guns in question:
Tika T3X Tac A1 with a Vortex Razor HD Gen II 4.5-27, chambered in 6.5cm
Savage 100 FCP HS with Viper 6-24, chambered in 300wm

I just got a Vortex Razor HD Gen III 6x36 and I can't decide if I should put it on the 6.5 and move the Gen II over to the 300, or if I should put the new glass onto the 300.

Both are bench queens. Range is 100 - 1000 yds.

Zeroing one would be easier, but I do shoot the 6.5 more often.

Thoughts?

thx

I Have a complete M24 SWS deployment kit that was given to me for my deployment in 2010 to Balad Iraq. I had plans to buy one of the Remington buy back rifles, but I don’t really care for what they’re doing with the program. Can anyone share some info on the best place to sell to an interested buyer looking to complete their Collection? TIA.

Looking for new PRS scope and am interested in opinions on these 2. I have not looked thru the newer Leupold MK4HD 8-32x56 yet so not sure how it compares to the Mk5HD line. Not thrilled with the lack of elevation adjustment on this scope. Have had good things about the Zeiss LRP S3 6-36x56 but again, I have not had a chance to look thru it. I am leaning towards the Zeiss.

Impact action for sale with or with out trigger. Will sell individually if someone wants either or.

Like new Impact action 308bf with less than 150 rounds on it. Asking $1275 shipped

Bix n Andy Tac Sport (single stage) trigger $220 shipped.

Impact and trigger $1475 shipped.




Located in North west Alabama

Prefer PayPal, cash app, Venmo, or best of all CASH…..

This is the kind of commie crap that is on TV now... Turner Movie Classics (remember Jane fucking Fonda is married to Ted Turner (or maybe his rotting corpse)....

Top Secret was a spoof movie in which The West took on COMMUNIST East Germany. Not Fascists.... Commies. Filthy worthless East German and Russian Commies.

But in the 'new' description they are claiming that East Germany was Fascist.





Talk about your bullshit 1984 re-writing of history.

Fucking commies.

Sirhr

PS. Fuck Jane Fonda and Ted Turner. Champagne Commies!

PPS. Don't get me started on how I 'Really' feel. Because this is totally sugar-coated.

WHAT:

More details are below adjacent to the relevant picture. (note, if there are any little white spots in the pics, then they are just tiny pieces of foam from the JAE packaging but I think I cleaned them all off)

PRICE: $1,250 shipped and insured UPS Ground in the original JAE packaging. Not open to offers…this is priced to move and I’d just as soon keep it than lower the price.

HOW TO BUY:
DETAILS:

This could get interesting

It's kind of odd. If I read this correctly it is still illegal to own a machine gun, but machine guns are bearable arms and therefore legal under Heller.
https://storage.courtlistener.com/recap/gov.uscourts.ksd.146873/gov.uscourts.ksd.146873.35.0.pdf

"Defendant Tamori Morgan is charged with two counts of possessing a machinegun in violation of 18 U.S.C. § 922(o). (Doc. 1.) Specifically, Defendant is charged with possessing an Anderson Manufacturing, model AM-15 .300 caliber machinegun and a machinegun conversion device. It was established at the hearing that the conversion device is a so-called “Glock switch” which allows a Glock, model 33, .357 SIG caliber firearm to fire as an automatic weapon."

"The government fails to address these facts, and thus fails to meet its burden to demonstrate that Case 6:23-cr-10047-JWB Document 35 Filed 08/21/24 Page 8 of 10possession of the types of weapons at issue in this case are lawfully prohibited under the Second Amendment. To summarize, in this case, the government has not met its burden under Bruen and Rahimito demonstrate through historical analogs that regulation of the weapons at issue in this case are consistent with the nation’s history of firearms regulation. Indeed, the government has barely tried to meet that burden."

This should be mandatory viewing, do not doubt it until you watch the full 1-2 minutes of history.

I did not know so I looked into it and vetted it myself.....

NOW I KNOW.

Login to view embedded media
Vetted

Maggots for breakfast at the DNC

Login to view embedded media

-Impact 737 action
-6BRA Impact by Stuteville bbl.
-Foundation MG2 - Dark distressed with extra 1" Lop spacer
-Triggertech Black Diamond
-Hawkins bottom metal
-Nightforce Atacr 7-35x56 F1 with Mil XT
-ARC rings
-Accuracy 1st level
-Foundation full length arca rail
-Little bastard gen 2 brake
-2 MDT 12 round mags
-Asking $6200

Never fired. I put this together during covid thinking I would jump into the PRS game with both feet but life had other ideas.
Also have some related reloading supplies that could be negotiated as well.

MPA/curtis custom axiom action
22” 308 barrel from Patriot valley arms
Light sendero barrel contour
Ag composite stock
Trigger tech special trigger
Trijicon accupoint 4-16 MRAD

Asking 2500

Wanted to get the Hide's perspective on something to see if this is typical practice: As a little background, I recently moved back to my hometown and joined the Rod & Gun club my father has belonged to for 30 years and I have been shooting at since I was 6. The club has about 650 members, trap, skeet, 'tactical' range, 300 yd flat range, 3D archery. It is a great place to shoot. More recently, they have expanded things to include a club house with a bar and kitchen. From what I can tell, save for large events or shoots, the only people that hang out at the bar regularly are chain smoking alcoholics who don't have families or dudes trying to escape their wives haha.
Anyway, I went to the club meeting yesterday which was mandatory for new members and one of their new stipulations for new members is 5 hours of club service within the first month of membership or else you are disenrolled. This apparently is a result of having a ton of members, but nobody to volunteer to do range maintenance, score trap and skeet leagues, bartend, or cook in the kitchen. At this point in my life, with a family, I have more money than time. With that, I always police myself and do not leave any brass or garbage on the range. When did this range become a co-op? What are your thoughts? Fight it since it isn't in the bylaws yet, or provide some slave labor to a club that I pay to belong to?... Why not just raise dues and hire kitchen staff / trap scorers / lawn mowers? It seems like the average age of the club members is about 60 which I understand at a certain point you cant keep lugging around railroad ties, shovel gravel, etc...but the people that have time for club functions are retired... im in my 30s and if I get a small window of time to do a quick ladder test some afternoon , I want to be able to knock it out - not perform work party functions. What are your thoughts?

For Sale - MDT ACC Elite Chassis
Fits right hand Remington 700 and Clones
Black with green and silver rattle can sponge camo.
Green MDT rubber dampeners
Internal of mag well has normal wear from metal mag as well as some wear from my ARCA bipod. Has most always been shot from a bench other than the one PRS match it was used for. Over all in great condition

$1300 shipped. BIPOD NOT INCLUDED!

Thank you

Wandering what reticle this is. Assuming a contract run, and possibly an Amry Mil Grid style. Just figured someone would know as I have dug into it on searches but don't seem to find much info directly on it.. Thanks

Since I'm not getting a Surgeon or a Stiller action and going with an Impact, should I also pick a different barrel than Lilja?

For sale is a beautiful MK13 Mod 5 complete deployment kit. Every piece of this kit was carefully selected to be as if you were opening a real issued kit fresh from Crane. Every piece is new and unfired/unused other than any test firing by the builder.

This particular Mk13 Mod 5 was built by Red Bull Armory to the exact specifications used by Crane. The action is a Stiller Mk13 marked Garland TX. Barrel is Lilja Mod 5 profile cut for KAC MK11 Suppressor, 1:10 twist. Suppressor is a Titusville marked KAC MK11 suppressor, unfired, on a form 4 pending form 3 approval. Scope is a Schmidt and Bender PSR with kit, also in pristine condition, with AWP PSR Rings. Badger IMUNS for your clip on. XTSP Mod 22 trigger. Harris S-BRM bipod. Also comes with correct pelican case, foam cut out, cleaning kit, tools, mags, log book, and documentation.

Update: Can is now on Form 3 ready for transfer.

Price: $32,000 shipped obo $28,000 shipped

Up for sale is an M110A1 Clone built off an MR762 by Black Ops Defense.

This build includes 417 takedown pins, Geissele SDMR Trigger, Geissele SDMR Mount, Sig Tango 6T, RAL8000 HK Furniture, offset Troy irons, Harris bipod, and all paperwork from HK and BOD. Skip the year+ wait on the next gen SDMR currently being fielded by our armed forces.

Rifle and all parts are unfired and unused.

Price: $12000 $10000 shipped obo.

Looking to sell a complete and unique piece of history, a pristine, unfired MK12 Mod 0. Parts are as follows:

Colt Vietnam collector edition M16A1 lower. Colt C marked key hole upper, colt C marked deep stamped bolt carrier group, PRI gas buster charging handle. Knights armament adjustable 2 stage trigger, Douglas 18inch barrel, Gen III carbon fiber hand guard, ARMs #33 SPR-PEQ—2-3 SWAN Sleeve, ARMS #40 rearsight, ARMS #17 Harris bipod mount, ARMS #22 rings with Leupold MK4 MR/T 2.5-8x36mm with MK12 SPR turret. Also included is an unfired Allen Arms AEM5, currently on form 4 pending form 3 approval to be transferred to your FFL.

Price: $7500 shipped obo