Zero press with shell holders lock rings and wrench. $850 shipped in USA PayPal f&f, Venmo, or Zelle

I am currently running a 20" Wilson Super Sniper in 308 Win lately. It been amazing and is absurdly accurate. I also shoot a Seekins PWS MK218 which is another excellent rifle. Something I have noticed with both as I develop loads for them: Even factory 147 gr FMJ tend to have substantial ejector swipes and flattened primers. I was running Aguila today and all the casing are non-reloadable due to ejector peel marks, from both rifles. I tried some handloads I was working up for a bolt gun, a minimum charge of Varget, same thing. Is this a common issue with AR10s? I will admit I do not shoot mine often, its usually a 300blk or one of my bolt action rifles. It seems a waste of good brass.

I’m slowly gathering parts to go down the reloading rabbit hole. So far I have ordered a Forster Co Ax and 3 sets of there bench rest FL sizing dies and seater dies for .270, 6.5 creed and 30-06.

My main purpose will be hunting inside 500 yards and to shoot small groups on paper. However I do plan to take the 30-06 and 6.5 out to 1000 yards once I get a hand on learning the ropes of reloading. Not into PRS or ELR at the moment so this is strictly a hobby for me.

I’ve been doing a lot of research of powder throwers and it seems the Auto Trickler V4 paired with the A&D fx120i scale is the gold standard with the chargemaster supreme being a solid choice as well.

1. Will the chargemaster fit my needs with the ranges I listed above?

2. Will I notice a big enough difference in group size with the Auto Trickler V4 to justify the cost?

Keep in mind I’m brand new to reloading, and will only be making small batches of ammo (50 rounds) at a time. The auto trickler seems pricey for someone just getting started but I’m also a buy once cry once individual. If the chargemaster will fit my needs then that leaves me $600 to go towards a garmin chronograph or reloading components. All recommendations welcome.

GAP built REM 700 Trued Action
RH SA 6.5 CM
Bronze cerakote
Bartlein 25” 1/ 7.5 HV contour
Threaded 5/8x24
Manners Elite LRH pro hunter stock
Pillar bedded
Badger M5 DBM
Badger 20MOA rail
Badger bolt knob
Trigger Tech Special

Total of one box of ammo shot through it.
$old shipped to your FFL conus
PayPal family friends or add the 3%

Facebook wouldn't let me post it because it went against their 'standards.'

It was that good..

Login to view embedded media

So a bit late to the game... but want to create a Kamala-tribute Glock... in much the same way that I did my Biden and Trump commemorative AR's.

Need to find someone who can do some really amazing coating work...

Who's out there who can help me out? I have an idea... but want to discuss. Will need to be a gradiated coating... Over the top of some slide engraving. I don't want to do this one with Krylon/airbrush.

Yes... it will be a fun project! And epic!

Sirhr

all my “extra” stuff that i need to move

make me offers on the bullets (retail pricing on left) and asking price on all the other stuff in picture. more you package together, better the deal i can give you

time to clean out the garage

Manners Elite Pro Hunter
Midnight camo
REM 700
RH SA
$800 shipped conus
PayPal family friends or add the 3%

I have a short action custom creedmoor die with .282 bushing, like to trade for .308 win short action die or sale for $275.00
@Roperboy87
Thanks guys!

Frankford Arsenal Platinum Series Rotary Case Tumbler with SS media and speed regulator - $150

Frankford Arsenal Platinum Series Brass Dryer - $50

Both are in mint condition and I should have manuals for both if wanted.

Available payment options are PP, venmo, and zelle.

Good day.

I read through many of the topics on here regarding the topic but I’m not sure if I could find and answer to my questions.

I am former infantry and got to use more than a few thermal and night vision devises. I try to keep up with some standard of tactics and shooting in the civ div. Things have certainly changed since the GWOT days. Unfortunately my budget is not the same as the military. I do some coyote hunting on my property and plenty of LARPing with the boys.

I live in the west mountain area and frequently run and gun and shoot some longer ranges usually out to 1000m

My 6.5 Grendel in a 12.5” barrel has really been good to me and I would like to get a clip on thermal scope for that rifle. It’s topped with a Burris xtr 2 2x10. What clip on should I consider with a budget of around 3-5k. What models should I keep an eye out for on the new and used market to put on this rifle considering the limited rail space. Ideally I would like to shoot out to 500 yards using the thermal device.

@FimRire RongLifIe is attempting to collect on items listed for sale by other forum members.

See below to include the claimed PayPal account…

Interaction has been reported.

Armageddon Gear Schmedium Mid Sized Game Changer, black. Asking $80 shipped. Only used once.

Show this to any moderates you know, that aren't sure if who they are voting for!
It's shocking what all he got done while fighting the establishment - the entire time!

Someone spent some time on this.

Hello to all!

I've some 2nd hand 6,5x47 Lapua brass that I received with my rifle, but I don't know how many reload was passed before I started to use this.

Now these cases show, at .200 line, measures greater that the standard SAAMI and measures obtained resizing the brass with a Forster FL Bushing die.
When, after FL resizing, I insert the brass on the chamber, close the bolt and after open the bolt whe have a click/clickering at the up of the bolt.

I read on the Net that the cause of the increasing of the quote at .200 line are a sign t'ha the brass are at end of is life, lost primers, head separation, bla bla bla...

Now I ask if are some remedy for this problem.
Ring die?
Small base body die?
Recicling bin?
Other?

Thanks, Camillo

Hey guys, just curious if there are certain cartridges that pair particularly well with short barrels? Or is it simply pick a cartridge and shave off x amount per inch? I am looking to build a 16 to 18-in bolt gun at around the 30-06 power level for around 0-300 yards, but we don't need to limit it just to that. I'm curious either way. It could be short action or long. So really I'm exploring all options. I saw a couple other threads but I believe they were just for short action stuff.

Just a heads up, we just got a delivery of the Arken EP-5 7-35x56 Gen 2 FFP Illuminated VPR - Zero Stop - 34mm Tube - MIL/VPR's

What say ye?

KAC Pvs30
Green factory refurbished unit
Includes original Knights box and extra black KAC lense cover as well
Clean glass; never stored with batteries and locks up tight on pic rail
1728 FOM
$4900 shipped and insured
***Sold Pending Funds ***
Zelle, USPS MO, cash FTF in northern OH or Southeast MI

Refurb unit with green tube

I’ll get pics of it up and running
Not much use; I just do not have the time to use it

Not really in need of trades, but I’ll ad some later if there is little interest

So I had to send in a LHT for warranty service after a failed custom turrent installation resultedin the turret being superglued in a locked position.

Got the scope back and mounted it. 1st range vist had trouble getting it dialed in. Thought maybe it was me. Went back yesterday and was shooting well. My Benelli Lupo with VX-5 printed the attached group so I know I was on. I could not get the LHT to zero again! Right before the mishap that caused the warranty issue I was printing 1/2 inch groups at 200.

So a few questions:

Has anyone had trouble with a Vortex directly after getting it back from service? Does vortex have some kind of recoil machine or something they test these in before they send them out?

I can switch it for a Veractiy I have lying around to test the scope to see what happens.

Should I try to print a group at 50 or 25 or something to see if it might just be me at 100?

Once I started to chase it, the gun did admittedly get hot, but from the outset this seemed to be an obvious issue.

Thanks for any feedback or tips. Right now, I would not take that gun hunting and am trying to find the most efficient way to figure this out.

I picked this up thinking I would build something on a Zermatt but just bought a full MPA build instead.

$75 delivered which is what I paid for it just two weeks ago in this PX. - SOLD

2 - Remington 700 RH/SA chassis for sale. The prices include shipping and may not come with action screws.

MPA Matrix: $900.00
Comes with side rails and internal weights. Unable to locate mounting hardware for the rails and weights.



Manners PRS-TCS: $1200.00
Doesn’t come with internal weights but includes Sikes Knob. SOLD


Thank you, Felix.

Found this in a local gun shop yesterday.
I don’t know much about them, and never owned one, just read about them online.

Based off of the serial number, it’s a ‘58 or ‘59, chambered in the ultimate fudd cartridge; .30-06.

I only stopped by to pick up a brick of GM215M primers, and stumbled across this in the used rack.
For $438 out the door, I think it was too good to pass up.