Rifle has less than 30 rounds through it. Built by Long Rifles, Inc. Cerakoted by Off The Grid, which was / is the official Noveske cerakote shop. 3 round targets are 0.55 and 0.65 at 100 with front bag only - no rear support - and shot by three shooters: me, my brother, and my 80 year old father with Hornady factory 6.5 Creedmoor 120 gr. AMAX ammo. This rifle will go smaller with better ammo, shooters, and set-up (rear bag, for example...).

Bartlein 5R barrel with heavy Sendero profile.
Remington 700 action blueprinted and trued by Long Rifles Inc.
McMillan A5-thumbhole with KMW / Terry Cross adjustable cheek riser
Badger bottom metal
Badger rail
2 AI magazines

$2250

More photos coming when I figure out how to make them smaller.

04/15/2024 - 20 Shots - 1072.2 MAX - 1040.4 MIN - 1055.8 AVE - 31.8 ES - 8.3 SD Notes: 54*F 68% RH 28.92inHG SP 963' DA 80 Fouling Shots
04/17/2024 - 50 Shots - 1077.9 MAX - 1039.9 MIN - 1062.9 AVE - 38.1 ES - 6.4 SD Notes: 44*F 45% RH 29.34inHG SP -167' DA 100 Fouling Shots
05/03/2024 - 50 Shots - 1082.3 MAX - 1041.1 MIN - 1060.7 AVE - 41.2 ES - 8.1 SD Notes: 59*F 59% RH 29.34inHG SP - 771' DA 0 Fouling Shots CCB
05/20/2024 - 155 Shots - 1100.1 MAX - 1056.6 MIN - 1075.8 AVE - 43.5 ES - 7.9 SD Notes 66*F 63% RH 29.17inHG SP - 1430' DA 100 Fouling Shots
Averages 1083.13 1044.5 1063.8. 38.7 7.7

Above is my log for a lot of Lapua Center X. Wondering if the trending higher velocities is the barrel "breaking in" or possibly temp related. Extreme spreads and standard velocity are staying around ~ 38.7 and 7.7 FPS respectively but the MAX, MIN and AVE are creeping up.

Using a Garmin Xero Chrono.

Rifle is a Vudoo 360 w/ a 24" 1:16R 5 Groove 1.20" Bartlein Barrel.

What is Jonathon releasing? Chris Simmons is shooting a prototype Modacam Mod-X in competition now! Jonathon said he had something big coming!! This will be great!!

I ended up with two CPSs so selling this one. Unfortunatly I don’t have either of the primer tubes nor the SRP priming pin. Those items can be purchased from primalrights website for about $60. She’s got a few dings in her from shipping but works absolutely flawless.

$550 OBO

Local pickup available in Alexandria, NJ.

Type 4--308 Winchester and Creedmoor Based Cartridges.

Product ID: 4057.

SKU SAC-TSDT4

Comes with box and original paperwork.

shipped. PP +4%, PP F&F, USPS Money Order, Check. No trades

Impact with a 20” Proof 22Creed barrel less than 150 rounds fired. Trigger Tech primary trigger Alpha SRP brass. And sizing and seating die. 90 grain atips and 90 SMKs.

$2000

I generally don’t see doctors, seldom at least. But I was having chest pain last month so my wife talked me into care now, they ran an ekg which was fine but recommended I go to the hospital immediately. I did so and they took my blood pressure, oxygen level, 3 blood tests, and an ekg. I wasn’t admitted and spent 3 hours in the exam room. Good news is with the exception of slightly high blood pressure everything was normal. I made an appointment with a cardiologist in case, did the stress test and he said I’m fine. My issue is the care now ekg was $185, the cardiologist with all the tests and EKG’s was about $500, and the hospital was $6000 and after insurance I’m due for $4000. The blood tests they ran cost $200 at quest, the ekg going rate seems to be $185, so I’m being asked to pay basically $5600 for using a exam room for 3 hours and have my blood pressure taken. I’m not cheap and normally don’t bitch about bills but this just seems excessive compared to the same test any where else. Is this something I can or should try to dispute or just shut the hell up and write the check?

Blah, blah, “RARE!”, blah, blah, blah…

Everyone thinks their stuff is “rare,” even if the rest of the world is tripping over them to get to their Big Mac.

This was THE scope that got to the finish line in the USSOCOM scope trials for their ELR selection, but lost to some douchy scope of obviously inferior quality (because I don’t own it… or maybe I do ).

Schmidt Bender PMII 3-27x56 L/P LT H37 FFP .1 MRAD CW RAL8000 Riflescope 669-945-372-B8-B4 with matching legit RAL8000 Spuhr SP-4002 mount.

If you’re a RAL Whore or HK Fag, this is the scope for you!

The Google tells me these basically don’t exist in the wild at prices a typically sane person would pay, since you could easily get a new TT or ZCO for the same or less. But… owning those scopes that any mortal can buy just makes you another flatulent nobody who leads a pointless existence. In short, if you’re an NF, TT or ZCO owner, you should just put a plastic bag over your head and asphyxiate yourself to death — ‘cuz yer a loozer and your wife and kids are ashamed to call you Father.

Anywho… I genuinely don’t know what this is worth. Some guys say $6K (I wish), some say $4K, and some say I’m gay (it was ONE time, and I was drunk in a bad part of town!). Pretty sure I have the original boxes for both scope and mount, but not 100% sure. They’re tucked away in a tote in one of my Conexes.

I’ll say $4,500 OBO. Make your offers. PM me with cash or trade offers for your Poverty Pony and half-eaten bags of Skittles.

Faux toes:

There was a tornado here yesterday about 1/4 mile north of my humble abode.
It was kinda breezy a bit, it's Kansas so we don't make too much ado about a little wind here and there.
Then there was the baseball size hail, that I can do without.
Fucked my truck over pretty good just like the old monkey with a ballpeen hammer dealio....luckily no broken windows on it.
My next door neighbor has this newer Jeep (pronounced hispanic "Heap") the one with the de-smell engine.....it is absolutely destroyed, huge dents and a broken out rear window.....and the tree that's now resting on it.....haven't heard a chainsaw yet.
Power was out for about 8-10 hours or so, was starting to worry about the fridge and freezer stuff.....but it seems OK for now.

Weather can sure suck some serious ass out of a dead and bloated donkey sometimes.

Atacr 5–25X56 F1 MIL-XT Immaculate only sighted in since mounted on rifle. NF six crew 1.125 height rings with NF multimount top. Comes with box and everything that comes in it new. Scope, rings w/cap
$2500 shipped.

Withdrawn

Have an elk hunt coming this year and I want to just run a factory rifle.
I first wanted to just get a TIKKA in 300WSM and call it good since I've had several the past
10 years and I already know it is more than sufficient to the job.
However, I've been wanting a nice wood stock rifle for a while and was considering one of the newer Win Mod 70's.
I can find them in 270 and 300wsm.
can anybody attest to the late model Winchesters consistency and accuracy? Ill likely hand load it since it won't be a rifle I shoot
year-round and I already have all the primers and powder I need. I'm not really interested in anything else, and the whole idea
started as keeping the cost below $1,500.

Dropped at shot without much fanfare, but I think this scope is worthy of discussion.

Built a new DMRish rifle that is waiting for this. I have one ordered via Cameraland & according to GPO these will be shipping in the next 2 weeks.

Checks a lot of boxes for me. Pretty high hopes for this one.

• It's short, really short
• Hope to add a clip on & rail space shouldn't be a problem
• German Glass
• Japan assembled
• FFP mil
• 10 mil per rotation locking turrets
• Zero stop
• Parallax down to 10y
• Illuminated reticle
• 20oz

Maybe I'm odd, but still like the Valk & built a new one. 18" 7T Special run Proof.
It will be topped by the Axis of Evil. GPO (German + Jap) & Audere mount (Italy).

The challenge for this scope will be finding mounts short enough. I know the Audere will fit so I have a 20moa on the way.
Max mount length for the scope is 4.3"


I really wanted to run the Tier 1, but it'd be a $350 gamble as to whether or not it fit. Available max supposedly is 4.3" & the Tier 1 is 4.291"
Will report actual once I have the scope in hand.





Reticle is pretty basic mil based.




What I was told by GPO is that this scopes Glass is German & all parts are sourced from the German HQ, but it's likley not every component is German.
Parts are QC'd in Germany and sent to Japan for assembly. The scopes are then returned to Germany for final QC & then shipped from there.

This is a reasonably priced scope that I'll gladly pay + $100 over an Athlon for. I also like TMR reticles so the basic mil hash is fine with me. Sometimes simpler is better. I've currently got XTR 3 (Both US and Philippines), Leupold MK5 HD, & Steiner T6Xi all 18x on AR's to compare. All are more expensive scopes with + 2 on the top end. I don't expect this to be their equal, but if it's functional I think it'll be a great option. I don't typically dial to min power anyway & if I need close I'll through a dot or irons on it to supliment the bottom end.

Selling a lightly used RRS TFC-24L MK2. Comes with original box.

$725 shipped

This one is a heartbreaker for me to list but it’s time to buy a new patio cover and this will help get me there.

JP LRI-20 6.5 Creedmoor
Geissele SSA-E X Trigger (will include factory trigger as well)
Area 419 Hellfire (have original JP brake as well)
Tactical Brass Recovery for the JP (not shown in photo)
One small grind mark on lower where factory trigger screws stripped out and I nicked the frame getting them out.

Has somewhere around 300 rounds through it.

ZCO 527 MPCT3x
Hawkins Mount 1.5”

Vortex Impact 4000 pictured can be included if the buyer is interested in the entire package shown.
Bipod not included

Will split them up but JP would need to sell before I consider selling the optic.

$3600 for the JP

$7200 shipped for everything minus Impact 4000 and bipod

UPDATE: moved remaining stuff to separate thread(s)

Please add a flat $20 for shipping. Everything pictured is in great working order and has been well cared-for and stored in a climate controlled space but feel free to ask if you have any specific questions/concerns.



21st Century Shooting Arbor Press Large base, right hand (sku 1007) with neck decapping base $110 sold
Wilson stainless micrometer top bullet seater die 223 Rem (sku 749-007-490) $70 sold

Wilson case trimmer (sku 487924)
Wilson case trimmer holder for 222 and 223 Rem (sku 340243)
Wilson case trimmer power adapter (sku 315672)
Sinclair trimmer bracket with shark fin (sku 05-495)
$120

Sinclair stainless priming tool (sku 749-007-603) $60 sold
Sinclair flash hole deburring tool with handle (sku 749003822) $15 sold
RCBS "rocket ship" deburring tool 17-to-45 cal $10
K&M controlled depth tapered reamer small .17 - 6mm (sku CDTR17-6) $40
Mitutoyo wall thickness micrometer with 60 degree modification from K&M (sku MITMIC60) $130 sold
Innovative Technologies Digital Headspace Gauge (larrywillis.com) $75 sold

Never fired Barrett M82A1. Basically new, just has a little bit of safe rash. I've been a member of this site for a long time but I usually just read the board and have never sold here before. steppone A+(152) is my username on GB.

Comes with the original pelican case and 2 mags. Looking to get $8300 shipped. The Night force NXS 5.5-22x50 is not included but is available with the one piece LaRue Mount for $1,500 I think it's a NP-R2 reticle but I could be wrong. Glass is clear, just some of the same safe rash.



Thanks

For sale is a used AICS AW 308 10rd mag p/n 0726 in excellent condition. Feed lips have been adjusted to work with my action and may need adjusting for your specific action to feed properly. $75 plus shipping. I can use USPS for lowest shipping cost if desired. I can provide a shipping quote. PayPal f&f

GONE

Looking to trade these as selling them at the prices they are going for seems crazy, I have swapped most of my guns over to small rifle primers.

They are new production, I just got them in from a back order I placed 1.5 years ago.

10 1,000 count boxes

Cant ship, live 1hr north of Atlanta.

Stuff I could use: (can add cash)
Surplus parts kits
Impact 737 SA
H4350
MDT Cyke pod
Silencers

UPDATE: moved remaining stuff to separate thread(s)

Selling some .223 Rem components and tools. Please add a flat $20 for shipping. Everything pictured is in great working order and has been well cared-for and stored in a climate controlled space but feel free to ask if you have any specific questions/concerns.






Hornady Match 22 cal .224 75gr (sku 22796)
340pc open box (lot 2100246) $65 sold

Hornady Amax 22 cal .224 75gr (sku 227296)
600pc unopened box (lot 2090376) $120 sold
215pc open box (lot 2090376) $40 sold

Sierra Match King 22 cal .224 52gr (sku 1410C)
(3x) 500pc unopened box $90 ea sold
375pc open box $65 sold

Lapua fired 223 Rem (~700pc)
two separate lot numbers, separated into a handful of smaller batches with 2x-5x firings on them
fired through my bolt gun, always a light touch used when reloading, no overpressure loads
these are in good shape with a lot of usable life left
$225 sold








Forster Ultra Die Set 223 Rem (sku U04202)
expander ball measures 0.2202"
includes red Forster hard case
$100 sold

Forster Neck Sizer 223 Rem (sku 006411)
expander ball measures 0.2227"
includes red Forster hard case
$30

Redding Body Die Cat 1 223 Rem (sku 75111) $25





Lee Collet Neck sizing die .223 Rem $15 sold
Lee Factory Crimp Die .223 Rem $10 sold
Lee Decapping die $10
RCBS Precision Mic 223 Rem (sku 88304) $35 sold
RCBS Decap die .22-.25 cal incl. 3 spare pins (sku 87580) $20 sold
RCBS Bullet Puller without collet (sku 9440) $15 sold
Hornady Stuck Case Remover, new (sku 050033) $15 sold
Hornady Lock-n-Load Straight OAL Gauge (sku C1000) with .223 Rem dummy case $20 sold
Hornady Lock-N-Load Bullet Comparator with 7pc inserts (sku 231904) $20 sold
Sinclair Comparator/Bump Gage (sku 749-002-552) with .22 cal insert $15 sold
Satern 22 cal stainless funnel + drop tube $10 sold
Sinclair wooden reloading block #2 $10 sold

Good afternoon guys, I'm reaching out with a question. PTG has a Remington 700 Blueprinted LA. I know that the M24 is chambered in 7.62x51 on a LA 30-06 bolt face. My question is what specifications do I need to give PTG to ensure that I get everything done accurately? So far they're the only place I've found a LEFT HANDED Remington 700 LA.

Thanks for your input!

Do we call this a taxpayer relief deletion?

https://x.com/AmiriKing/status/1791971924815368687?ref_src=twsrc^tfw|twcamp^tweetembed|twterm^1791971924815368687|twgr^6355448d1998025ba885016555343510c74371e5|twcon^s1_&ref_url=https://www.thegatewaypundit.com/2024/05/teenage-rapper-shoots-himself-head-while-recording-tiktok/

https://www.thegatewaypundit.com/2024/05/teenage-rapper-shoots-himself-head-while-recording-tiktok/

not the bed. That bitch should be brought up on child neglect charges. Always blame the product, never the one who made a conscious decision to forgo warnings about an items operation. Much like the warning to stop the engine before attempting to change the fan belt.

In terms of safety (not accuracy) should I measure diameter of each one so I don’t blow my face off?