Hello everyone. I just joined after a long time of coming across this forum during searches. I currently have an Eotech XPS and magnifier on my AR15 and I don't have any experience with variable magnified optics.
I'm thinking about a Steiner T6xi 3-18x56 MIL for my new Larue 18" 308. I will be deer hunting with this and outside of hunting season, I'll be target shooting out to 500 yards (with the rare possibility of over 500 yards).
For those with a 3-18x optic (or even this exact optic), does this seem plausible for both hunting and target shooting?
Thanks in advance, and glad to learn from everyone here.

You can bet there was some giggling as DNC lawyers with their lisping voices sent agents to crash Giulani's birthday bash. Bunch of petty, chickensit faggots.


It appears this is a warning by Demoncrats to anyone questioning the next stolen election.

A gentleman at my club can no longer shoot due medical issues so is letting this tack driver go. sadly wont be recovering from the med procedure in a way that he can come back and shoot anytime soon with his age.

gen3 60* bolt throw
Vudoo 20 inch barreled action (1220 rounds fired)
Triggertech trigger (flat face)
KRG Bravo Stock
Barrier stop
KRG ARCA Rail
ARCA Clamp
4-V22 Standard 10 round magazines
1-L3I Elite 14 round magazine
Harris Bipod & Pod lock
2-magazine pouch

$2800 shipped to your FFL (firm, no trades)

arken EP5 scope with rings available with gun +$500
he is ONLY interested in breaking up the gun from the scope. he will not part out the rifle (stock/BA/trigger/etc)

Recently bought a KRG Whiskey-3 Comp pack. First time installing the spigot to the chassis, found the spigot is not super align with the barrel tunnel.



Contacted KRG, sent it back, and they fixed it. All good! I can't be more happy with their CS.

However, my initial guess on the misalignment is due to something wrong with the backbone, like the angular error. I did put a bubble measure on different parts of the backbone and can confirm the backbone is twisting counterclock-wise from rear to the front. This tilt is still present after their service. I did measure the forend and the backbone separately today, both of them have this counterclock-wise twist.


Forend Rear

Forend Front

Backbone Rear

Backbone Front

I know the chassis, though precision machined, is not holding as tight tolerance as the action or the barrel. But is this type of twist considered normal in machining tolerance? or I'm just being too perfectionist?

If you folks have the KRG chassis, especially W3, and a bubble level on hand, would you mind measuring yours as well?

my father and I have unwittingly turned into glass snobs over the course of our lives thanks to so many bad experiences and so much wasted on cheap (probably) Chinese made scopes. we haven't tried anything Chinese made in about 5 years.
I was putting together a rimfire for kicks and giggles and ordered a 5-25 venom off amazon for 420$ honestly expecting to send it back.
first impressions of this scope are amazing. if it tracks close and repeatably it will definitely be a keeper for rimfire. no idea how it would hold up on a SA comp rifle but this may be the legit ticket for rimfire. first pretty day here I'll take the razor2, nf, tt, and venom out and snap a few pics because I'm flat shook.
turrets, VERY stiff(excellent) and positive, not near as much mush as I expected.
glass was devastatingly good, like old school viper glass...
parallax was stiff but it works so I can definitely get used to it.
is this the norm for chinesium scopes nowadays? really hope this thing lasts.

Greatest deception ever perpetrated.

Which scope manufacturers offer a VIP discount program for state prison correctional officers?

Please PM for contact. PayPal Gift or cover fees ONLY.

Vortex Razor Gen III 1-10x24 EBR-9 MRAD with Reptilia 1.54 mount and One Hundred Concepts Scope Cap Pro (Has an ARD) on it, Very little use and since I got my Mk5 2-10 I have not used it. Scuffs on the Battery cap but Vortex will replace it for free if you call them - SOLD Shipped​

Reasonably good condition Marlin 39A for sale. $550 plus shipping.

Some light surface rust, some light pitting, stock has scratches, etc. Considering it is an old gun that was actually used it is in good condition, but it's also not a safe queen. Functions perfectly. Very nice 22 lever action. Feels much more like a "real" rifle than the Henrys I have shot. The lever has a fairly short throw and the gun is well proportioned.

Only selling because I don't use it. Nothing wrong with it, I'm just one of those weirdos who doesn't like keeping guns around that aren't being actively used.

Deciding on a build. Thoughts:

published velocities are 100 fps slower for SAUM, but I'm thinking with 10 grains less capacity than 7mm Rem Mag, that may be an underestimate of the gap in real world, esp seated long

You can't fill the SAUM case with enough of any Hodgdon powder (per QL) without being seriously compressed, so I see most shooting stuff like RL23/RL26, which is unobtanium. Plus I have plenty of H1000 H4831SC and Retumbo on hand and only RL19 and RL50

Is saving 1" length on the action important? Will most short actions accommodate a 175 or 180 ELD without loading too deep and encroaching on case volume?

I don't care about the belt

ADG SAUM brass is in stock right now, seems like that problem is more or less solved

Is SAUM a better (more efficient or more "inherently accurate" or easier to tune) cartridge?

Thoughts?

Like new Atlas BT65 bipod standard clamp.
Asking $220 shipped

Now I know why I always miss…

Skip to 11:12 for the good stuff.

Login to view embedded media

Cz 457 with .17HMR and .22LR barrels. Walnut "American" stock and also a spare synthetic stock. Has been lightly used but not abused. There are light scratches / marks on the walnut stock.

$500 plus shipping. obo.

4-12 Vortex crossfire scope with parallax adjustment down to 10 yards.

20" .17HMR barrel is threaded.
24" .22 barrel is not threaded.

3 - .22 lr 5 round magazines
2 - .17 5 round magazines
2 - .17 10 round magazines.

At sfp in a vision chassis. No barrel or with barrel option.. Comes with a full and short Nvg bridge. No scope bipod etc. I have short and long barrels in 308 and 6.5cm of interested all threaded 5/8x24.

No barrel 4k shipped obo.

Barrels are 500-650 depending on which one if you want any.

Venmo only no trades thanks!

So I got this back after trading it away and in the meantime I found out something really cool about it. It is an original Team 419 action (defiance deviant rebranded). Turns out the 419 guys want it back and have offered two solutions to anyone interested.

1) send it to them and they’ll give you a brand new deviant and fit the current barrel to it.
2) shoot the barrel out and send the action to them and they’ll give you a brand new deviant to replace it.

All that being said, this gun is a hammer! Smoothest cerakote action I have ever felt. The action has a barrel life on it (1000+ rds), but the barrel has about 130 of mostly hand loads at 2650.
- bartlein 1:7 twist 28” threaded 5/8x24
- Triggertech special single stage straight shoe
- MDT ACC chassis with upgrades including buttstock weight kit, new cheek riser, forend weights (have 4), and bag rider
- (1) magazine included that isn’t pictured.

I hate the weight question on match guns but it’s heavy. Like 18+ lbs. remove the weights if you want it lighter. Add them if you want it heavier

I would trade toward a FDE ATACR 5-25 or 7-35 Mil with any reticle except MIL-C. Also open to other high end mil mil optics.

I will split for $1200 for the chassis.

$1400 for the barreled action. - SPF

Kahles 624i SKMR3 MIL Reticle. Includes original boxes, parallax spinner, and paperwork, scope coat, and Tenebraex scope covers, and MKM throw lever.

In great shape.

$1850 Shipped

Login to view embedded media
This has a little of everything- bad police - really bad police chiefs - city attorneys that don’t file charges on criminal conduct. A Police department that has a deal with a fire department to hire bad officers until things cool off and then hire them back on the force .
Electro torture, assault, false arrests, making arrests out side of jurisdiction.
. A former fire chief now police chief that is barely able to read or speak who claims he “wasn’t really a police chief just a figure head “
Removing disciplinary actions from service files, falsifying records.
Cities of Highland Park and Warren MI- trading shit heads back and forth until it ends in criminal indictments .
We do a lot of work in Highland Park; could never figure out why everything there is so expensive including real estate. Just one of these clowns has cost the city $400,000 in settlements in a one year period.

Got a new Frankford tumbler a couple days ago and put fresh corn cob media in and let it sit in the garage with the lid off and fan running for a few hours to get most of the dust out. Then added the Frankford polish as per instructions and let it run for about another hour. Then, when tumbling my first batch of once fired factory brass it came out real clean but had sticky residue on em. It wipes off with a little effort but WTF??! I have never seen this before. Anyone out there know what this may be?

CZ 457 MTR Match Ready 20" with less than 2k shot thought it.

MTR with 419 30MOA rail, 419 bolt handle, 419 weighted ARCA rail, Timney adjustable trigger set @ 10oz (also has stock trigger), 5 CZ mags w/ L3i +3 bases and Short Action Precision double mag pouch. Arken EP5 5-25x56 mil scope w/ Arken bubble level, Arken throw lever, Arken mounts, and IDTS scope tape. SOL spare mag holder, Matthew's Fabrication adjustable cheek rest (there are two sets of holes to move the riser forward and back) and assorted delrin butt pad spacers. Gun shoots good groups all day with SK rifle match. $1,400.00 OBO for the package, I don’t want to breaking it up. I could trade for an Impact 737r RH short action.

I'm an FFL so it would ship from me to your FFL. In South Carolina, local pick up possible.

Thanks for looking

Chilling video shows the moment a crazed neighbor executed a father and his stepson in cold blood in a Brooklyn apartment hallway during an argument over noise Sunday night.

The distressing footage obtained by The Post opens with a man dressed in all black pacing angrily outside his upstairs neighbors’ apartment on the fourth floor of 1418 Brooklyn Ave. in a well-known East Flatbush housing complex where stars Barbra Streisand and Michael K. Williams grew up.

Anyone a math wizard. If so can you show me what four hundred million billion is. I need to get my 6.5 dope. Thanks for the help

Looking to flush some of the last guns out of the safe that I never touch. Got some other projects I need to finish around the house and would rather have the money for that than sitting in my safe.

I will get pictures of everything up later but you can message me as I might have some on my phone to text you.

1) beretta 92x RDO compact - optics ready with rail. Like new, original owner with factory box and two magazines - $650 shipped

2) Armalite SPR Mod 1. This is a factory built rifle with the monolithic upper. Don’t be confused with the pricing on some lowers that say SPR Mod 1 but have a standard upper - $1,000 shipped

3) AJ Brown built MK12 Mod 1 clone. Utilized the Larue rail and Douglas barrel with the proper brake. Lower is an old school DPMS with Larue parts. I was told AJ was on the team designing the MK12 at the time. Cerakoted Multicam. Will come with a matching ADM scope mount - $1,250 - SOLD shipped for the whole gun

4) ruger American in 450 bushmaster with leupold VX-freedom 3-9 - $600 shipped and will throw in brass I have for it

5) Custom Browning Citori CX 32” 12 gauge OU. It has the adjustable comb from factory but went in to have the Gracoil recoil system installed. Comes with factory box and is in great shape with very minor nicks in the wood from use - $2,250 shipped

I don't understand why the cops in Louisville didn't do a mag dump on world#1
I'm guessing no acorns?