Deciding on a build. Thoughts:

published velocities are 100 fps slower for SAUM, but I'm thinking with 10 grains less capacity than 7mm Rem Mag, that may be an underestimate of the gap in real world, esp seated long

You can't fill the SAUM case with enough of any Hodgdon powder (per QL) without being seriously compressed, so I see most shooting stuff like RL23/RL26, which is unobtanium. Plus I have plenty of H1000 H4831SC and Retumbo on hand and only RL19 and RL50

Is saving 1" length on the action important? Will most short actions accommodate a 175 or 180 ELD without loading too deep and encroaching on case volume?

I don't care about the belt

ADG SAUM brass is in stock right now, seems like that problem is more or less solved

Is SAUM a better (more efficient or more "inherently accurate" or easier to tune) cartridge?

Thoughts?

Like new Atlas BT65 bipod standard clamp.
Asking $220 shipped

Now I know why I always miss…

Skip to 11:12 for the good stuff.

Login to view embedded media

Cz 457 with .17HMR and .22LR barrels. Walnut "American" stock and also a spare synthetic stock. Has been lightly used but not abused. There are light scratches / marks on the walnut stock.

$500 plus shipping. obo.

4-12 Vortex crossfire scope with parallax adjustment down to 10 yards.

20" .17HMR barrel is threaded.
24" .22 barrel is not threaded.

3 - .22 lr 5 round magazines
2 - .17 5 round magazines
2 - .17 10 round magazines.

At sfp in a vision chassis. No barrel or with barrel option.. Comes with a full and short Nvg bridge. No scope bipod etc. I have short and long barrels in 308 and 6.5cm of interested all threaded 5/8x24.

No barrel 4k shipped obo.

Barrels are 500-650 depending on which one if you want any.

Venmo only no trades thanks!

So I got this back after trading it away and in the meantime I found out something really cool about it. It is an original Team 419 action (defiance deviant rebranded). Turns out the 419 guys want it back and have offered two solutions to anyone interested.

1) send it to them and they’ll give you a brand new deviant and fit the current barrel to it.
2) shoot the barrel out and send the action to them and they’ll give you a brand new deviant to replace it.

All that being said, this gun is a hammer! Smoothest cerakote action I have ever felt. The action has a barrel life on it (1000+ rds), but the barrel has about 130 of mostly hand loads at 2650.
- bartlein 1:7 twist 28” threaded 5/8x24
- Triggertech special single stage straight shoe
- MDT ACC chassis with upgrades including buttstock weight kit, new cheek riser, forend weights (have 4), and bag rider
- (1) magazine included that isn’t pictured.

I hate the weight question on match guns but it’s heavy. Like 18+ lbs. remove the weights if you want it lighter. Add them if you want it heavier

I would trade toward a FDE ATACR 5-25 or 7-35 Mil with any reticle except MIL-C. Also open to other high end mil mil optics.

I will split for $1200 for the chassis.

$1400 for the barreled action. - SPF

Kahles 624i SKMR3 MIL Reticle. Includes original boxes, parallax spinner, and paperwork, scope coat, and Tenebraex scope covers, and MKM throw lever.

In great shape.

$1850 Shipped

Login to view embedded media
This has a little of everything- bad police - really bad police chiefs - city attorneys that don’t file charges on criminal conduct. A Police department that has a deal with a fire department to hire bad officers until things cool off and then hire them back on the force .
Electro torture, assault, false arrests, making arrests out side of jurisdiction.
. A former fire chief now police chief that is barely able to read or speak who claims he “wasn’t really a police chief just a figure head “
Removing disciplinary actions from service files, falsifying records.
Cities of Highland Park and Warren MI- trading shit heads back and forth until it ends in criminal indictments .
We do a lot of work in Highland Park; could never figure out why everything there is so expensive including real estate. Just one of these clowns has cost the city $400,000 in settlements in a one year period.

Got a new Frankford tumbler a couple days ago and put fresh corn cob media in and let it sit in the garage with the lid off and fan running for a few hours to get most of the dust out. Then added the Frankford polish as per instructions and let it run for about another hour. Then, when tumbling my first batch of once fired factory brass it came out real clean but had sticky residue on em. It wipes off with a little effort but WTF??! I have never seen this before. Anyone out there know what this may be?

CZ 457 MTR Match Ready 20" with less than 2k shot thought it.

MTR with 419 30MOA rail, 419 bolt handle, 419 weighted ARCA rail, Timney adjustable trigger set @ 10oz (also has stock trigger), 5 CZ mags w/ L3i +3 bases and Short Action Precision double mag pouch. Arken EP5 5-25x56 mil scope w/ Arken bubble level, Arken throw lever, Arken mounts, and IDTS scope tape. SOL spare mag holder, Matthew's Fabrication adjustable cheek rest (there are two sets of holes to move the riser forward and back) and assorted delrin butt pad spacers. Gun shoots good groups all day with SK rifle match. $1,400.00 OBO for the package, I don’t want to breaking it up. I could trade for an Impact 737r RH short action.

I'm an FFL so it would ship from me to your FFL. In South Carolina, local pick up possible.

Thanks for looking

Chilling video shows the moment a crazed neighbor executed a father and his stepson in cold blood in a Brooklyn apartment hallway during an argument over noise Sunday night.

The distressing footage obtained by The Post opens with a man dressed in all black pacing angrily outside his upstairs neighbors’ apartment on the fourth floor of 1418 Brooklyn Ave. in a well-known East Flatbush housing complex where stars Barbra Streisand and Michael K. Williams grew up.

Anyone a math wizard. If so can you show me what four hundred million billion is. I need to get my 6.5 dope. Thanks for the help

Looking to flush some of the last guns out of the safe that I never touch. Got some other projects I need to finish around the house and would rather have the money for that than sitting in my safe.

I will get pictures of everything up later but you can message me as I might have some on my phone to text you.

1) beretta 92x RDO compact - optics ready with rail. Like new, original owner with factory box and two magazines - $650 shipped

2) Armalite SPR Mod 1. This is a factory built rifle with the monolithic upper. Don’t be confused with the pricing on some lowers that say SPR Mod 1 but have a standard upper - $1,000 shipped

3) AJ Brown built MK12 Mod 1 clone. Utilized the Larue rail and Douglas barrel with the proper brake. Lower is an old school DPMS with Larue parts. I was told AJ was on the team designing the MK12 at the time. Cerakoted Multicam. Will come with a matching ADM scope mount - $1,250 - SOLD shipped for the whole gun

4) ruger American in 450 bushmaster with leupold VX-freedom 3-9 - $600 shipped and will throw in brass I have for it

5) Custom Browning Citori CX 32” 12 gauge OU. It has the adjustable comb from factory but went in to have the Gracoil recoil system installed. Comes with factory box and is in great shape with very minor nicks in the wood from use - $2,250 shipped

I don't understand why the cops in Louisville didn't do a mag dump on world#1
I'm guessing no acorns?

For Sale: Leupold Mark 4HD 2.5-10x42
- Illuminated model with TMR reticle (mrad)
- BNIB, never mounted, opened it to check it out because I was curious.
Pretty impressive scope for the money, just don't have a rifle to mount it on at the moment.

$900 shipped OBO
Zelle or Venmo preferred.

A6 edge Bedded and painted by TS customs for impact 737r action. Full length arca.
LOP around 13.5 inches. QD cups on the front and rear for sling mounting. DBM bottom metal.
Also will include new Hawkins Hunter DBM and mag if wanted for 300 more.

Will consider trade for MDT or similar ACC elite chassis, etc. if you have something you may want to trade.

1100 to lower 48. 1400 with Hunter DBM and Mag.

Such as trusting certain people with positions of authority and being surprised when they self-reparate.

I'm feeling some deja vu all over again.


She'll look different in a month unless the prison commissary sells hair straightener.

Son got a job with one of the big barrel makers.

Proud Papa.

Gently used Annealing Made Perfect mark II with everything originally comes
Only 500 cases

Eotech clip IR for sale:
$5,300.00 shipped and insured
9 years of warranty left

Like new- never used, just mounted and taken off

Ok so having SAC build me a custom 7PRC, I’m calling it a hunting rifle but will shoot steel more than anything. So I don’t want a large heavy scope like my ATACR 5-25

So I’m thinking NX8 2.5-20 Or the 4x32

I like the low of the 2.5 but the higher magnification of the 32. Haven’t looked through either, wondering if the 32 is actually effective or does it get blurry at that high magnification with only a 50 mm objective lens.

ALSOOOOO considered the ATACR 4x20 for the better glass. But the price point is much higher and Will I really noticed the difference between that and the NX8???

Again rifle is built on a manners pro Hunter stock with a Proof carbon fiber barrel to keep it light so wanted to keep the scope light as well. And yes it has to be a NF

For sale is a collection of top-quality precision rifle components, perfect for building your dream rifle. Here's what's included:

Surgeon 591 Action:

Right-hand, Short Action Repeater with .473 bolt face.

Manufactured in Prague, OK, with a low C0391x serial number.

Professionally Cerakoted.
I misplaced the Bolt stop and purchased a new replacement. It is not Cera Koted. If I run across the coated one it will be included but I can't make any promises it will be found in this lifetime..

Purchased in 2013/2014 but never assembled into a rifle.

Surgeon Short Action Bottom Metal:
Includes Accuracy International magazine and aluminum bedding pillars.

Bartlein 6.5mm 8 Twist Barrel
M24/M40 contour with 1.250" breech diameter.

McMillan A5 Adjustable Stock.
Rem 700 Short Action inlet.
Molded in Desert Camo with Sniper Fill. Includes 2 studs and 2 flush cups for easy customization.

LAPUA 308Win PALMA Brass 500 Pcs of New. All from the same lot number. Two of the blue boxes have been opened for inspection but the others remain sealed.

Face to face transaction is preferred. All shipping, transfer fees, ect. will be the responsibility of the buyer.

$2700
I do have this cross posted with another popular gun forum.
Thanks for looking,

Stellar work boys - well the Richmond PD pd finally found some illegals they didn’t like/ work for actively. The investigation went so well the Chief had to resign.

Login to view embedded media

And the mass shooting conspiracy / terrorism/ cartel membership charges didn’t hold up because after searches and surveillance NO evidence was found BUT charges filed and even handed over to feds .

Illegally reinterring the country one one guy- a gun charge on another . Wouldn’t it be nice to see this hustle and effort against actual cartel members ?

Login to view embedded media Ex girl friend kicks open door
Under police supervision no less - and then they enter without warrant taz and arrest owner .
Amazing; Chief Wiggum has nothing on these guys !