I bought this unfired from a friend who had it pin and welded. I’ve only put 40 rounds thru it. It does have the notched upper. Comes with the buffer. Does not come with sky scraper or red dot. Since I bought a complete rifle this can go. It was purchased new last year from operational parts for $2250
$2050 shipped. Only trade I’d be looking for is a 4-16 or 4-20 nf wit milxt or mil c reticle

is posturing again. This link is to a Greek site that will load in Greek but then will translate into English, a few seconds later. If not within 20 seconds just refresh the page.

I wonder if this will be any good?

Login to view embedded media

Stickers. SOLD

This is still in its factory box (unopened, even). Because of weight, must meet me in Nashville (no shipping). $1575 - which may not seem like much of a discount, but with sales tax and shipping, it's at least $175 off. This price is firm, because I don't really want to get rid of it as much as I want the space the box is taking up. No trades.

Will obviously shoot photos of said shipping box/chat/FaceTime or whatever with whomever might be interested.

Decided to keep it.

Unfired LMT FULL AUTO BCG. Less than a month old $150 shipped/insured

DLC TL3 SA with whatever size bolt head you'd like. shipped

Jewell trigger - with action

Proof 26" stainless comp contour 223 prefit
800-850 rounds through it
Comes with load data - with action

Proof carbon 24" 6.5prc
sendero contour
450 rounds through it
Comes with load data - with action

Both of these barrels shoot fantastic. The 6.5prc especially. Very consistent .3moa barrel with my load.

Mainly just want to sell the action but if someone wants a Turnkey setup I'm willing to let some or all of this go. Can assemble the barreled action for the buyer if they don't have a vise and action wrench.

200 Peterson twice fired 6.5 CM LRP 110.00 shipped. All cleaned 100 are resized and ready to load.

Berger .284 180 hybrids at least 495 in the box. 300.00 shipped

Hornady .284 190 a tips full box 80.00 shipped

Berger .264 bullets 175.00 shipped. 1 box has 47 in it.

I hope all is well, people. i recently joined this forum after finding out that my brother was a huge fan of precision shooting. I was hoping this community can help me get them priced accordingly as I am trying manage his estate. Any help or comment on the sheet would be appreciated. Thank you.

You need to become a supporter on the site to sell items here. Also they need to be sold in the PX.

Looking to trade my NX8 2.5-20x50 MIL-XT FFP for a Leupold MK5 3.6-18 with the TMR reticle. My NX8 will come in Vortex Precision high rings, or I can take it out of the rings and send it with a giessle AR mount. Will come in box with everything from factory.

Labradar w/instructions.
Soft Case. No rips or tears. Zipper fully functional.
Air Gun Adapter-case, microphone, bracket, and instructions.
Mounting tripod. Fully adjustable for height and 3 axis articulation.
External rechargeable battery w/connector.

Excellent condition. I do not abuse my equipment.

$375.00 shipped CONUS. PP+4%, PP F&F, check, USPS Money Order. No trades.

Wonder if his name is going to pop up on “the list”……couldn’t face the music didn’t want his daughters to either????
Hollywood actor Christian Oliver, 2 daughters killed in Caribbean plane crash: report





https://www.foxnews.com/entertainment/american-2-daughters-killed-caribbean-plane-crash

Was looking at upgrading from my 1980s rock chuck. The question I have is: Can the Redding T-7, with the Creedmoore upgrade, build bullets as well as the Zero press?

Don't care about faster than the Zero but how does the Redding T-7 compare for repeatability and head spacing and runout and all that?

I'm sure I'll still prime and throw powder by hand.

According to Newsmax (per their Newscrawl), Wayne La Pierre has resigned from the NRA!

4 clicks per inch at 100 yards seems like it would be the easiest but I'd love to hear opinions.

I know it is silly to ask about spin/windage drift on a pistol cartridge like 9mm, but I have a Vector SBR that has a 6.5" barrel and 1/10 twist. Basically its an overglorified Glock 17L with a threaded barrel. When I zero it at 100 yd and check the laser bore sight afterwards, the laser is way high and to the left of my POA. I'd say about 3"-4" to the left and 6" or more high at 18 yd with the laser bore sight.

Worse, at the 100 yd line I can print a 2.5" 5-shot group but then sometimes none of my shots are on paper. I've tried different optics to no avail. I figure since the barrel is part of the lower receiver, and the optic is attached to the upper receiver that it may have some impact on this. I did notice that after a few shots or a mag is when the shots no longer hit paper at 100 yd. Once it is all cooled down, it seems to shoot normally for a bit.

Strelok does predict windage drift out to 100 yd (without any wind) but its showing a max of about 0.5 inches. Normal rifle cartridges don't show much in the same app.

I can understand the elevation drop because 9mm is a slower heavy bullet (115 gr at under 1200 fps or 124/147 at even slower velocities). But that much windage shift is odd.

I thought my barrel might be bent, so I re-adjusted and zeroed the windage at 7 yd, 18yd, and then checked it with the SL-150 laser boresight at 45-90 yd. It was dead-center at all of these distances. So the barrel is presumably "pointing straight".

Sierra shows 115gr JHP to have 1.15" windage drift at 50 yd. So it could be something like 2" at 100 yd? And given a 2"-3" grouping precision at 100 yd, could that explain something like a 4"-6" drift?

Is it just the nature of 9mm fired out of a short barrel at this distance?

TSA director arrested by US Customs and Border Protection in ...​

Fox News
https://www.foxnews.com › us › tsa-director-arrested-us-...

Mixture of bullion and collectible/vintage silver. Prices and list to come

I have a used Eberlestock X31 LoDrag for sale.

Fehu Outdoors removed the lower portion of the scabbard for me on this bag.

No tears, zippers all work, just a little dusty from match use.

Asking $200 shipped in the lower 48
PayPal friends and family

Leupold MK 5 5x25 PR2 reticle still in the wrapper. Sold

Selling a Remington M541 X military target rifle in 22lr. No a lot of info on the out there but from what I gathered a couple thousand of these were made in the 70s and the CMP sold them in the 90s. It is in great shape, not sure the round count, but it isn’t high at all based on the wear on the action. There is on ding in the barrel from the safe and and some rub marks on the barrel.

The specs are:
26” bull barrel
Williams peep sights
Single 10 rd mag
QD sling mount on front

Cool gun but I just have no use for it and taking out to shoot is a hassle because she is a thick gal.

Asking $500 shipped OBO. SOLDDDD

Which one of these laptop will fuck me the least or will at least wear a rubber? Would be used mostly for work/home.

Dell Latitude 15.6 3540 laptop

or

Lenovo Thinkpad E16 laptop

Mostly surfing the web/watching movies/tv. Would also be used to run Excel, SILVAH, FVS, R ect (Statistics/Data Collection/Analysis software). All isn't to hard to run. I currently use an MSI modern with an I5/16 gig of ram but its starting to show its age.

Includes:
SAC proprietary action tuning, including timing and proprietary 8 step action tuning process.
SAC nitride, preferred over standard Defiance Nitride
Factory SAC bolt handle
Includes Area 419 bolt handle adapter and BAT machine knob

Bought in 2021. This action is pre defiance sale.
1700 shipped

Hello Community of shooters. i am looking to see if yall can help me identify those rifle and its worth. my brother recently passed away and we are trying to clear out his affairs. Would it be possible to get a rough idea on its estimates. seems like he built most of them during the Pandemic

Chassis,
Trigger
Action
Barrel
Scope
Scope Mount
Bipod, Rail

Thank you so much
have a blessed day