Latest activity

Sniff · Jun 2, 2025

Nice little Czech carbine you have there. dot is the wartime factory code for Waffenwerke Bruenn AG, Brno, Czechoslovakia.

m1ajunkie · Jun 2, 2025

Rhed said:
Thank you for the videos. Subscribed to the channel.

Appreciate the support!

m1ajunkie · Jun 2, 2025

Maurygold said:
Your videos are awesome! These included. How is setting wind on the maztech? With and without the remote? The impact is very easy to change wind with the remote but I have a moral opposition to cables and probably wouldn’t run the maztech remote so I’m curious

Very simple to set the wind, I'd say just as easy as the impact 4000. One difference I've noticed though, the Impact 4000 remembers wind direction on the compass as the unit rotates. Doesn't seem like that's case for the Maztech so you'll have to remember to make adjustments as conditions change.

I can't speak to the performance of the remote as I don't use them.

beetroot · Jun 2, 2025

Sniff said:
Cheers for the idea. I'll try it.

My BIL who is a welder said it's rather carcinogenic, works well but don't breath it in when applying.

Will pick up a new suppressor at some stage, keen to try both the weld splatter spray and ultrasonic cleaner.

I think ill try weighing the suppressors too as a guide as to when to clean.

Sniff · Jun 2, 2025

Threadcutter308 said:
When you get done cleaning everything, hose down the internals with MIG (welding) "Anti-Spatter" spray. Doesn't matter what brand. It'll make subsequent cleanings a snap.

Cheers for the idea. I'll try it.

168BTHPM · Jun 2, 2025

Login to view embedded media

Detroit_1 · Jun 2, 2025

Login to view embedded media

91Eunozs · Jun 2, 2025

Threw a flamethrower? WTF kind of reporting is that?

Molotov cocktails, or homemade napalm I can see maybe, but a flamethrower? If he had a flamethrower (pretty easy to make actually), why would he be throwing it?

More of that stellar reporting from ~~the MSM~~ CNN.

matt33 · Jun 2, 2025

Bacarrat said:
My current barrel has been nothing but H4350 and 140gr ELDMs. Barrel slowed down a bit from 2800 to about 2750. The other week I did a quick work up on RL16 was hitting around 2845 FPS and not even pushing it that hard. I'm almost positive you can fill it up to the top, slam a 140gr bullet in there and not get pressure with RL16. I'm trying to use up my H4350 then I might dig into my RL16 stockpile. It doesn't come around often and now it's crazy expensive.

I just opened my last 8 lb container of rl16 today. Like you, I was getting close to 2,850 in a 24" AI without reaching book max.

I use Berger 140 grain hybrids and Lapua brass, I've had the best results between 2,770 and 2,800. Going to finish tweaking this load tomorrow, this new lot is a little bit faster than the old lot.

Dank27 · Jun 2, 2025

Trade Pending

71firebird400 · Jun 2, 2025

3rdfocal said:
Only 100 rds but flawless so far. I shot from the tripod quite a bit today and didn't see any zero shift. This rifle flat hammers.

Does Barrett make their own barrel blanks?

I've tested with different bipod locations and a tripod and haven't seen a zero shift either. I still need to test with a bag on a barricade but I can't imagine that's a whole lot different than what I've already done.

Bacarrat · Jun 2, 2025

matt33 said:
I use a lot of rl16 and h4350 with 6.5 cm. The velocity thing is definitely true, however, I also find rl16 to be less temperature sensitive. However, both are great in this department.

H4350 is definitely cleaner than rl16. I get similar accuracy with both using 140s.

My current barrel has been nothing but H4350 and 140gr ELDMs. Barrel slowed down a bit from 2800 to about 2750. The other week I did a quick work up on RL16 was hitting around 2845 FPS and not even pushing it that hard. I'm almost positive you can fill it up to the top, slam a 140gr bullet in there and not get pressure with RL16. I'm trying to use up my H4350 then I might dig into my RL16 stockpile. It doesn't come around often and now it's crazy expensive.

Snuby642 · Jun 2, 2025

Namekagon said:
The only way either side could ever be worse tacticians than they are would be by abandoning the most strategic airbase in Asia along with $2 billion in equipment to a group of homosexual goat fuckers.

We cannot confirm or deny the sexual preferences of said goats.

I'm inclined to think the goats were held in the goat brothels against thier free will.

diggler1833 · Jun 2, 2025

I went through this same mental battle recently for a dedicated critter rig. Went with 6CM because of the flatter 0-300 trajectory and lower recoil. An added benefit was that I already had dies for it from another 6CM barrel, but that wasn't a deciding factor.

You're also talking only .014 diameter and ~25 grains of bullet weight difference too. Put the correct bullet where it needs to be and you'll see no appreciable difference in killing.

Maggot · Jun 2, 2025

SRW said:
I literally just said I was in the most recent video. I emailed him and actually ran into him in town, he and I live near each other.

Well then lets move to

"I tried to contact him several times, no reply, so I gave up"

Maggot · Jun 2, 2025

JR_77 said:
Hearing aids have dramatically reduced my tinnitus by at least a third if not more however that’s while wearing them. As soon as I get up and put the hearing aids on, I can hear the ringing drop within minutes and stays away all day if I’m wearing them.

Hearing aids have also helped with Hyperacusis as well.

Interesting, that just made me realize that I dont notice the tinnitus when Im wearing my Axil earbuds. If youre not familiar with them, you should be. Great for shooting.

AXIL Official Site: #BUYAXIL | AXIL: Your Go To Ear Pro

goaxil.com
https://www.goaxil.com

Bluetooth ear buds, noise isolation headphones and electronic ear muffs all in one device. Let AXIL Cover Your Hearing with the World’s Most Innovative Technologies and Solutions. Revolutionary Design. Talk With Hearing Experts. Satisfaction Guaranteed.

tomme boy · Jun 1, 2025

I hate to tell some people this but I have to. Just because your gun shoots a 0.4" group at 50 yds does NOT mean it will shoot a 0.8" group at 100yds. I wish people would STOP saying this.

I have a center fire that shoots consistent 5 rd groups of 0.25"at 100yds. But it has NEVER shot a 0.5" or even a 0.75" group at 200yds. It just does not work that way. I have yet to see in person someone that can do it like everyone says it happens.

Wysongdog · Jun 1, 2025

I’ve got lots ogbth9ngs to trade just not on your trade list lol

Maggot · Jun 1, 2025

mosin46 said:
we must alert Greta so she can put a stop to this. Al Gore will help.

We could stuff that big head down its throat. cause it to choke on its own vomit.

SRW · Jun 1, 2025

Maggot said:
Good luck with that. I tried to contact him several times, no reply, so I gave up.

I literally just said I was in the most recent video. I emailed him and actually ran into him in town, he and I live near each other.

Maggot · Jun 1, 2025

mosin46 said:
don't wish such on anyone but if it happens the response is obvious. the NGOs and deep state will pour in millions of funds we don't have. of course after passing the $s thru their pockets. it's done all the time and in Europe? big $s in corrupted relief. we all know that foreign relief efforts are more important than w.coast FL,NC or Maui.

Or homeless Americans because of Joe, or homeless, PTSD vets, or funding Medicare, or balancing the budget, or..................

Maggot · Jun 1, 2025

Sean the Nailer said:
And his name is mohammed. (sp?whogivesashit?)

Correct spelling?

Moe ham it

matt33 · Jun 1, 2025

Bacarrat said:
RL16 is more temp insensitive then H4350. I prefer it over H4350 or just about any powder for the 6.5CM. Plus you get a speed boost with it over H4350. 100+ FPS is not uncommon when comparing the 2 loads at full boogie loads.

I use a lot of rl16 and h4350 with 6.5 cm. The velocity thing is definitely true, however, I also find rl16 to be less temperature sensitive. However, both are great in this department.

H4350 is definitely cleaner than rl16. I get similar accuracy with both using 140s.

gamewarden · Jun 1, 2025

Make an offer.

gamewarden · Jun 1, 2025

Up.....

Latest activity

Latest activity

Filter