This edditor sucks balls.

The inclusions still ended up at the top. And to top it off the crumb is tight with small holes only.

The olive tempinod with some sun dried tomatoes does taste good.

This was a good flick to watch....

Login to view embedded media

Drive the speed limit. Use your blinkers. Just generally don’t be a douche nozzle while operating a vehicle. Nobody getting pulled over for firearms violations.

The “grey man” isn’t rolling coal in a jacked up dually, with a Molon Labe sticker in the window. He’s driving the speed limit in a 20 year old minivan with a stick-figure family on the back window.

Well the bullet sure looks like it's engaging the freebore/throat area of the chamber.

Don't use a caliper to measure the bullet diameter. To get good numbers use a quality mic and make sure it's calibrated and that the mic measures in .0001" increments as well.

Your doing the right thing in getting a hold of the barrel maker/gunsmith that set it up for you.

I know it's a pain in shipping... but I would ask them that when you send the barrel in to send in the whole barreled action so they can check everything out.

I've run Hornady black ammo in other calibers (not in 6CM) and never had an issue with bullets hitting like that. Also as a fyi we make pretty much all of Hornady's ammunition test barrels. They haven't called with any issues with chambers etc... on the test barrels that we do for them.

I'd also reach out to Hornady and see if they would want a box of ammo back for them to look over. It wouldn't hurt to give them a call.

Keep us posted on how what you find out etc...

Later, Frank

Putting the extra seasoning in the last loaf really didn't improve it at all.

Back to work on inclusions.




Did kind of a trifold, then shaped it up .




Into a banneton and 12 hr cold ferment.

Cooked till 207 degrees.

HogsLife said:

Transgender Palestinian immigrant huh? Wonder why she immigrated here…, lol

Click to expand...

They come here for the freedom that we offer and piss all over it.

How hard is it to understand “don’t post anything on-line that you don’t want to defend in court?”

26 " 90 degree bolt, standard 5/8x24 muzzle threads. Yes, I can sell the barrel and magazine for $400.

JR_77 said:

View attachment 8768417

Don’t be like The Reverend Lindquist.

Click to expand...

He's going to paint an "8".

Inlet?

alpine44 said:

Dear low resolution bible readers on the Hide:

The bible is a collections of metaphors. It has to be metaphorical to get the point across without loosing the meaning in the trivia of life. Humanity would have run out of paper if we --guided by the word and will of God-- had tried to factually record everything that was said and done during the periods covered in both testaments. It also would have become a very boring read up to the point were the ran out of paper.

Even detailed descriptions of specific places and names are used to convey the essence of the meaning of what went down. EVERYTHING was condensed, needed to be condensed and should have been condensed into more complex structures of meaning.

What's the point? Do not try to find the antichrist by looking for a single person. It appears as a "solution" (a deal with the devil) in the thoughts, words, and actions of many.

I appreciate your attention to this matter.

Click to expand...

I think the hyper defensive controlling Jewish lobby is miss identified like this too. They are bought off through their own evil desires, while receiving the negative attention, being used by the evil one, who stays unidentified and “unsullied” in public opinion in the background. It seems like pedo stuff and other deviant sexual behaviour is the currency most commonly used. Basically the same as NGOs that are a public front for much more nefarious orgs that fund them. I think satanists really enjoy buying off and setting up the Jews this way. The old saying goes “like taking candy from a baby”.

RIP Sundance.

I've got 3 Carbon 6 barrels - all from a few years ago ( nothing recent ). They all shoot to various degrees below MOA. And since I'm one of those people that's "I got's to know" - I ran my borescope down them when they were new. All looked smooth with no obvious ugly imperfections.
Of course, this does not really help you now, but I've been pleased with mine. Ordering was easy, communications were quickly responded to, and delivery was on time. YMMV, but I hope this little bit of information was of some help.

Where are you located? What range? I’ve also never run into an issue regarding the type of reticle. Sounds like a bunch of Fudds metaphorically kicking sand into your dirty communist rifle.

Up

I've had my Obsidian45 for 5-6 years now I think. Used it on 9mm, 10mm, 45 and 300 blk...and it's been good. I had a baffle strike from shooting it loose on 9mm...(still feel like pistol cans need taper locks) but it wasn't an issue with the can per-say.
I've got the 1/2x28 and .578x28 piston, as well as a fixed barrel adapter. It's a good "do all" can for sure.

Login to view embedded media

bump

My vote is an origin, you’ve got the option of TL3 prefit with the HLR lug, origin prefit and a savage small shank with barrel nut setup. Then add in the the 700 foot print/trigger compatibility, CRF with mechanical ejector that is case length blind which is nice for short cases since it’s not pushing the cartridge into the side of the action on feeding/extraction.

BTT...

theLBC said:

Powerful public figures spread false info about Charlie Kirk assassination, beliefs, invent quotes

Celebrities, journalists and politicians portray suspect as conservative Christian, attribute quotes to Kirk that he was criticizing, change what he said and mischaracterize sources that supposedly back their claims.

justthenews.com

and when they reference "right-wing" violence, they are including flyers and shit like that, not actual violence.
they are probably counting every "it's okay to be white" flyer as another "violent" incident.

Login to view embedded media
Login to view embedded media

Click to expand...

$100 firm

theLBC said:

Click to expand...

When people throw around the term TRANS we should encourage them to be a little more specific.
Let's acknowledge their individuality and not lump them all under one label.
What do you mean by TRANS? General gender dysphoria, autogynephilia, suppressed homosexualiy, undercover pedophilia, ...?