Latest activity

ShootnFool8 · Tuesday at 1:56 PM

Up... PRICE DROP

mark5pt56 · Tuesday at 1:50 PM

^^^^^^^^^^^^^^^^

lariat · Tuesday at 1:40 PM

Edsel said:
They guy paid out of pocket for what probably wasn’t top - tier security.

Aaaand, drone importation bans because Chyyynuuuh View attachment 8768725

There are currently no drone import bans. There are usage restrictions for .gov. There are tariffs. There are also drones made here in the US and other countries around the world that are extremely capable.

Could they have used drones? Maybe, depends on several factors, such as flight restrictions in the area, time to get permission, denials of permission (it does happen), and the ability for the security team to preplan drones routes, etc. All of this is only relevant IF the had an extremely competent drone pilot trained in the specific tactics to perform that mission properly. Otherwise you just have a drone flying around contributing very little.

Slash0311 · Tuesday at 1:40 PM

Thump_rrr · Tuesday at 1:40 PM

XTREM HTR16 said:
Do you use an oversized mop like a 30 cal for 6.5 or 7mm?

I will take a photo this evening and post it here next to a set of calipers.

Here is the pic of the mop with the closest size I have in a package.

Also pictured is the Iosso chamber brush.

You can see how it’s squeezed down at the tip where it enters the neck area.

Thump_rrr · Tuesday at 1:25 PM

CanMike said:
Incredible group at that distance.

Mike

There was an error with Ballistic x
It was a 107y group at 0.279 moa
The photo is now correct.

image_cropper_0AFF03B4-419C-463F-9E22-76386B8C5957-29260-000005068FD90565.jpeg

gamewarden · Tuesday at 1:24 PM

XP1K · Tuesday at 1:23 PM

alpine44 said:
Dear low resolution bible readers on the Hide:

The bible is a collections of metaphors. It has to be metaphorical to get the point across without loosing the meaning in the trivia of life. Humanity would have run out of paper if we --guided by the word and will of God-- had tried to factually record everything that was said and done during the periods covered in both testaments. It also would have become a very boring read up to the point were the ran out of paper.

Even detailed descriptions of specific places and names are used to convey the essence of the meaning of what went down. EVERYTHING was condensed, needed to be condensed and should have been condensed into more complex structures of meaning.

What's the point? Do not try to find the antichrist by looking for a single person. It appears as a "solution" (a deal with the devil) in the thoughts, words, and actions of many.

I appreciate your attention to this matter.

Agreed.

Terry Cross said:
One could use the same brush to paint others as the Anti Christ just as easily. Soros and the kenyan just to name two.

True. True. Probably a lot of folks sold on that one when he came to power.

Makinchips208 said:
Haha! No. Trump isn’t the antichrist.

Has he performed miracles and signed and done wonders? Lol

Maybe give it some time ? Joking. Kind of.

HogsLife said:
Lot of rumors out there. Wondering who the Antichrist has been going on for centuries.

Gotta test these theories with scripture. If it fits the bill it it fits. If it doesn’t, it doesn’t. That’s why we have them.

https://christianitypath.com/verses-in-bible-about-antichrist/

For sure.

I don't truly believe he's the antichrist. I dont think we're that far in the timeline yet. My posting that was more or less in jest to the comments about it being musk. They for sure serve a purpose in God's plan. But I do not believe they serve God.

lash · Tuesday at 1:23 PM

OREGUN said:
No corporation in the history of corporations has ever, without being forced, done the right thing if the right thing jeopardized their income stream.

The goodness or badness of a corporation is thusly just an expression of whether its actions to enrich the shareholders creates a harm that is considered tolerable when weighed against the perceived benefit of allowing the corporation to continue acting in its own self interest.

Google never gave a shit about you and never will. And if they’re raking in $3000 a second there’s no way they would ever choose to jeopardize that even if they had to write $1 billion checks to avoid being held accountable for their actions.

While we’re on this topic, citizens United needs to be overturned immediately.

True.

lash · Tuesday at 1:22 PM

Im2bent said:
So when do I get my check?

The award amounts to about $4/user. And it’s in appeal.

lash · Tuesday at 1:21 PM

OREGUN said:
Online/digital privacy? Never heard of her.

Shocking revelation? Hardly.

The title / lead was sarcasm, try to catch up.

lash · Tuesday at 1:18 PM

Barneybdb said:
View attachment 8768398

As long as you opened it at 8:27Pm you’re fine.

Barneybdb said:
View attachment 8768419

Totally cool, but I would instantly do this:

View attachment 8768340

mosin46 · Tuesday at 1:17 PM

Terry Cross said:
This is true but a poor retort to Fig's observation.

Yesterday I typed out a LD size reply to your post similar to Fig's but never posted mine.

I was thinking like Fig but also keyed in on proper investigations having finite resources.
If you bog down the investigation with enough mundane and conspiratorial leads, the effectiveness of the investigation is hobbled rather than enhanced.

Sure, every lead or clue needs to have at least a cursory review or sniff test. If it is obviously bullshit, no further resources should be exhausted on it.

Sadly the huge majority of shit posted as suspicious or conspiratorial on all platforms is exactly that.
It is shit that somebody or some bot generated for attention, clicks or outright diversion.

In a real fight, you cannot waste time and energy on bullshit diversions if you are to succeed and win. Everybody should know that. That is why so much planning and energy goes into DIVERSIONS! Because they are effective.

Don't feed the demons.

Sun Tzu or whatever the fuck. . .

i guess my question is what are they investigating? they claim to have the shooter,DNA,film,rifle. haven't heard about ballistic match but seems the investigating is done. so,looking into a deeper conspiracy is not slowing anything down.
yea,on principal,i think they are lying or covering up. that is just based on past gov actions in all the killings we know about. i doubt any deeper digging is going to happen. some who were aware might be found and charged with conspiracy. those will be small time players mostly jacking their jaws. any JFK like conspiracy is never going to be found,admitted or investigated. i don't think Netanyahu ordered it. doesn't mean he didn't with 3-4 levels of cutout. that is never going to be looked at anymore than dim party leaders,Muslims in this country or rep neocons.
i see this going like OKC/McVeigh. fast capture,trial and execution then "move along,nothing else to see here".

Emerson0311 · Tuesday at 1:10 PM

Yes. I used several cases of CCISV in my T1X. An average of 44 (10)shot groups at 100 yds was 1.77” Center to Center. At 200 the vertical stringing was brutal, 8”-9” over 10 shots. The “groups” would be 2” wide. I practiced on paper at 100. When my positional groups got small enough to be close to my bench groups, I upgraded ammo to SK S+ and SKRM. Until then, use CCISV to practice, unless you are only doing BR.

gr8fuldoug · Tuesday at 1:04 PM

Have you checked out the new GPO APO Spotting Scopes - If you have been looking for a high quality spotter without the crazy high price tag the wait is over.
This is the spotter you're looking for.
These PASSION APO spotting scopes combine portability with exceptional optical performance, delivering the same cutting-edge features as its larger counterpart in a more compact design.
Built for rugged adventures, it features APO lenses, GPObright™ coatings, and precision adjustments for stunning visual clarity in any environment.
As a long standing supporting vendor here it's always our pleasure to assist the members here. Please feel free to give us a call, 516-217-1000, so we can assist you personally with different available options and special opportunities .

flyfisherman246 · Tuesday at 1:02 PM

I own Misery Custom Rifles and I use my business credit card almost daily purchasing gun parts and what not. For years now my business card gets fraud charges and I have to go through the whole process of canceling, waiting on a new card to show up, then updating my card information for all my accounts. It happened again last night and now this is my 6th business card this year. My personal card as well as my wife's card don't ever have this problem. It makes me believe one of my vendors somehow has unsecure payment allowing my information to get out. I'm trying to narrow down where it can be coming from but I use too many vendors to even know where to begin. Has anyone had issues with any vendors in the firearms industry as far as their cards getting frauded? If you don't want to mention names publicly feel free to send me a PM. Thanks, Zack Tannen

30cal user · Tuesday at 1:01 PM

PM sent

straightshooter1 · Tuesday at 12:58 PM

RTTY said:
Hello, a friend myne had tested some Reload with a new powder.
This had find nodes at 38,7gn and 39,5gn.
My rifle and the rifle of this are identical apart for the barrel lenght, myne 28" and his 26".
Same bullets, same powder, same primers same case.
Have I some possibilities to find the nodes on my rifle near the friend nodes?

Thanks

RTTY said:
Hi, thanks for the reply, but what you explained is still too elaborate for my skills. Can you help me?

To start with, two barrels of the same length, same material, same contour from the same company can still have chambers that are cut a little different even with the same reamer (reamers wear over time), which can produce different results. Even the bore can have a little different cut. Next, barrel lengths produces different velocities. . .the projectiles are in the bore for a different length of time with exactly the same cartridge load. Then there's "harmonics" where different barrel lengths vibrate differently, just like orchestral chimes. Different vibrations of the barrel means a different point of release when the projectile exits the muzzle.

You might use your friends load as a starting point for your load development. You might get lucky and find a "node" pretty close to what's works for him.

TonyAngel · Tuesday at 12:54 PM

Yeah, I'd say that's about right with a good lot of CCI SV. That ammo is a good standard velocity plinking ammo, but far from being match ammo.

At 50 yards, the best bulk ammo I've found for my setup is Federal Auto Match.

These days, I'd say the best ammo you can get that isn't insanely priced is SK Standard Plus, even that runs $90 a brick. I've had some very good luck with SK Semi Auto, but that has been very lot dependent and the time and money spent lot testing eats up the savings.

Check out Whidden Gunworks. You can order a lot of the ammo they sell by lot number.

fx77 · Tuesday at 12:49 PM

cas6969 said:
View attachment 8768229

Patricia Farinelli Miss Dec 1981

Latest activity

Latest activity

Filter