Latest activity

Emerson0311 · Aug 16, 2025

Darayavaus said:
this is why women never used to be allowed to vote.

They either rule by however they feel at a moment in time, or more likely, just don’t feel much of anything, like a wild feline. You could call it practical, or Machiavellian, but even the females who am closest to are like this.

jmtgsx · Aug 16, 2025

If you've never played before, this is a fun way to while away the upcoming college football season. In a nutshell, pick one team that hasn't lost yet. If they win you get to pick another team the next week. Lather, rinse, repeat. No prizes, just for fun. By the 8th or ninth week of the season, the number of undefeated teams usually gets down to 10 or 15, so you might want to save the top teams for deeper into the season.

Rules
1) Pick one college FBS (aka Division 1) team per week. (136 choices week 1!)
2) The team you pick MUST BE UNDEFEATED and PLAYING THIS WEEK.
3) Once you pick a team you MAY NOT PICK THEM AGAIN.
4) If your pick loses you're out. You only advance to the next week if your pick wins.
5) If you fail to pick in a given week, you're out.
6) Last player standing wins.
7) Picks must be posted in that week's thread.
8) If all the undefeated teams lose in a given week or no survivors can advance to the next week, the tie breaker is the player who posted earliest in that week's thread.
9) Each succeeding week, post your pick for that week, as well as those of your previous picks. This helps YOU not to repeat a pick.
10) If you decide to change a pick, don’t edit the original post, just make a new post. I use the last post you make for your pick. This will also affect tie breaker (Rule 8)
11) Be very clear with your pick. Follow the name format of ESPN Conference Standings. (i.e. OSU could be Ohio State, Oklahoma State, or Oregon State)
12) Schedule weeks are per ESPN.
13) Keeping up with your picks is part of the game. If someone picks a team that has a loss or is not playing that week, don't feel it is your civic duty to point out the error of their ways.
14) Pick must be in thread before kickoff of your game.

Here is a link to the Week 1 Schedule College Football Schedule - 2025 Season - ESPN

Tricky bit in week one as 8 teams play twice in “Week 1” (Rule 12). If you pick one of those, you must designate which game.

Post your Week 1 picks in this thread.

Lawless · Aug 16, 2025

Pulled from IG and TikTok

Lawless · Aug 16, 2025

91Eunozs said:
Actually Proverbs 27:17 … but yeah

I admit, I didn’t check

ohiofarmer · Aug 16, 2025

To the top

bigboss91 · Aug 16, 2025

ShtrRdy said:
Did you see any change in color of the flame after a few seconds?

No. I was looking for an orange flame but didnt see it. I adjusted my setup for a very slight glow in the neck for 1 second then it drops out.

Thanks for the responses everyone. I will turn up the flame next time so the cycle time is quicker.

vh20 · Aug 16, 2025

Weights are a real good idea, and you can take them off when going hunting since you won't be doing a lot of shooting. Also maybe something like a Limbsaver recoil pad, or the wearable shoulder recoil pads for target sessions. Plus, of course the best-rated brake you can find.

shoot4fun · Aug 16, 2025

RTTY said:
Ok for the infos, the bench at my range are about 24" large.

That does seem to be on the small side. The FC series has a pretty wide stance.
I tried the Rempel (meant for F-Class) on one of the larger benches I shoot on and once adjusted to correct height the legs were almost as wide as the bench.

Habituallinestepper · Aug 16, 2025

Anyone know what size the screws are for these?

6.5 GUY · Aug 16, 2025

Get free shipping.
7 boxes of Lapua brass all SS wet media cleaned!
Redding Type S Match die set!
MagnetoSpeed V3 free with purchase.
Reduced again to $2,750.00 shipped.

91Eunozs · Aug 16, 2025

Lawless said:

Actually Proverbs 27:17 … but yeah

structureaggie · Aug 16, 2025

To your point about flinching, my 03a3 is the only rifle I shoot with a shoulder pad. I’ve got 300 win mags and other manner of big guns. Some with recoil pads some not. Anyway, I couldn’t shoot my 03 worth a crap because that steel butt plate beat the hell out of me and it wasn’t fun. $30 investment changed the accuracy of the gun. It was the archer in this case for me. So, 03s are accurate and if you remove the bullet from the equation then it could easily be you.

BravoSector1 · Aug 16, 2025

18" Proof Research Carbon Fiber barrel chambered in .223 Wylde. 1:8 twist rate, threaded 1/2x28.

Fired under 300 rounds. All AAC 77 grain OTM. 5 shot groups averaged 0.47 MOA.

Includes a 2A Armament titanium gas block and black stainless gas tube.

I recently transitioned to a 6mm ARC barrel so this needs a new home.

$650 shipped

USPS money order or discreet electronic forms of payment accepted.

IM/email for any questions.

scrumpdeleos · Aug 16, 2025

EODsniper said:
Well this is tempting

Well it needs a new home!

vh20 · Aug 16, 2025

nso123 said:
No, be aware of what’s coming down the line when they get back in power. We have to remember that he’s even having to fight his own party. It’s a temporary disruption unless we have fundamental changes across the country.

They were already doing it during their past two administrations. Trump is just following their playbook. If he wasn't doing it now, it's not like they WOULDN'T do it again when they come back.

shoot4fun · Aug 16, 2025

RTTY said:
Hello @shoot4fun , your preference about AccuTac and his adjustability are about the cant and pan?

If yes, I don't need the pan adjust, and so the plenty adjustability of the FC4 compared to the CAL are always superior?

I don't use the pan but cant is, as you know, most important. Some benches I shoot matches from are on the small side and the pan feature can make a difference in being comfortable behind the rifle or not.
Both of mine are FC4, as that is what I was able to buy at a considerable discount slightly used, but that doesn't mean the FC5 will be a bad choice. The other, and first acquired, is a BR4 I think (maybe the longer legged version) and I found it to be a bit long for bench use. It was always too high at 90˚ and the legs were too close to the front edge of the bench at 45˚. I also prefer the wider stance provided by the FC bipods.

Taylorbok · Aug 16, 2025

I like to shoot groups 25 ish power, maybe back it off a bit depending.

That being said it's getting shot with what ever scope is going to be on it, I'm not changing optics to shoot groups

Dirty D · Aug 16, 2025

Does anyone have Barney’s number?
Login to view embedded media

The Knuckle · Aug 16, 2025

nso123 · Aug 16, 2025

918v said:
So do nothing then? Like all the prior republican presidents?

No, be aware of what’s coming down the line when they get back in power. We have to remember that he’s even having to fight his own party. It’s a temporary disruption unless we have fundamental changes across the country.

Alpine 338 · Aug 16, 2025

hermosabeach said:
Can the manufacturers bring back the "ball vent" I had in a 69 ford?

Love the ball vent

Yeah, this automated climate controlled crap sucks. In two of my 2021 Toyota's, it's like they have a mind of their own. I just want cool outside air coming into the cab, and it always trying to turn the air conditioning on. And one of them I have to go three deep into the touch screen just to turn the fan down. Who ever thought of that should be shot.

King_beardsly · Aug 16, 2025

I say get a really good break, people around you might not be your biggest fans but it’ll cut recoil significantly. Get something in the 4-5 port range and send it

Alpine 338 · Aug 16, 2025

clcustom1911 said:
The steal of a deal $1800 desert 🏜 Douchebag white boy special.

2001 Suburban 4x4 with RCD lift ($2500) and 35's already on it. Tires and wheels alone would have cost $2500-3k (Moto Metal 17x9's and BF Goodrich 315/70r17's). Just $$$$ performance rebuilt the 4LSlippy (4L60e). Doing other delayed maintenance things (assorted bushings, axle/wheel bearings, pitman/idler arms etc). And of course nothing is ever complete without some kind of rattle can shit (wheels )

Up next is computer tune for the correct tire size, proper Mishimoto plug/play auxillary transmission cooler (not the $100 poors ebay/amazon 40K with all the jinky gay hose cutting/barb fittings), rear axle bearings and seals, rear transfer case output shaft seal, sway bar bushings, Kryptonite tie rods, new speakers, instrument cluster with transmission temp gauge, fan clutch. I'm probably gonna go up to 4.10 gears all around and Eaton Truetrac rear locker, and down to 33" tires in the future. The current 3.73's and 35's is definitely not ideal for towing plans in the relatively near-ish future.

View attachment 8748284 View attachment 8748288 View attachment 8748289 View attachment 8748287 View attachment 8748286 View attachment 8748285

Front hub bearings were vibrating the whole truck View attachment 8748290

Had one of those (2500) with ambulance doors for a work vehicle. I loved it. Fuel pumps and power steering pumps were ways failing on them though.

Boatscrypto · Aug 16, 2025

Login to view embedded media

Bart · Aug 16, 2025

Would trade towards a Leupold Mark 5 3-18 pr2....
Thanks!

Latest activity

Latest activity

Filter

Precision Rifle Gear ACC Elite Screw Size? (Control bridge)

SOLD 18" Proof Research Carbon Fiber barrel - 223 Wylde - 1:8 twist - 1/2x28 thread pitch w/2A Armament titanium gas block & gas tube