WTF is this? I’m so tired of this crap. Didn’t we just get rulings on these things?

Login to view embedded media

KAC 2 Stage Match Trigger with 4.5lb and 3.5lb springs.

$SOLD Shipped OBO

PayPal Accepted

I just picked up a Marlin 1984 SPL in 357/39 SPL, which is just as beautiful of a rifle as I'd hoped it would be. The only 9mm suppressor I currently have is an AAC Ti-Rant 9, which is very quiet but I'm wanting to get something that can handle 357 mag and that is a little better tailored to this application. I'm wanting something shorter and fatter that will add less length and hopefully still be about as quite as my Tr-Rant 9. I would also use the can on my 9mm AR and potentially on my 300 BLK AR and Ruger American. I already have an Omega 300 that I assume would probably work better on my 300 BLK, but it would be nice to get something that can be used with 300 BLK. I plan to only use it direct thread and not get a piston set up as can just use for handguns.

The shop I picked up the Marlin from tried to convince me to buy the Rugged Alaskan 360, they had it in stock in both steel and titanium version. The steel version is actually still light weight especially if I get a titanium direct thread rear end cap. But everything I've heard in the past is that a "Do it all can" won't be as good at anything as a can intended for that purpose. Would the Alaskan 360 actually be as quiet on 38 SPL and 9mm as a can built with the primary focus on being a 9mm PCC can like the OCL Lithium 9? I'm also assuming it wouldn't sound as good on a 308 or 6.5 bolt gun as my Omega 300. But the reviews I've seen claim it sounds good on just about everything so that has me tempted. If I get a dedicated PCC can I'll end up getting another 30 cal can at some point so I can have more than one rifle suppressed at a time when shooting rifles.

The main PCC cans I am thinking about:

• OCL Lithium 9 - Very light weight and a good price for a full titanium can.
• AB F4L 9mm - Very light weight and good price. Con: it's not rated for 300 BLK supers.
• YHM R9 - It's heavier than the rest, but very short, it's the cheapest and all the reviews I've seen on it are very positive.
• Energetic Sonus 9 - This doesn't seem to be as good of a value as it's heavier than the Lithium of F4L and cost just as much. But the wipe holder in the end cap has me wondering would it be worth it to be able to run a wipe sometimes for shits and giggles/wow factor on being crazy quiet. But part of me thinks that just gimmicky and I wouldn't actually go through the trouble of running a wipe after trying it once.

Dillon casefeeder plate small pistol
I don’t think it’s ever been used
$37 shipped

Having feeding issues with Hunter magazine running 7-08. 308 feeds fine from this mag but the 7-08 is a no go. The first round feeds but all the others are taking a sharp nose dive into the front of the mag. Contacted Hawkins and sent mags back for evaluation to have them say that they are within spec and found no issues but also told me they did not have 7-08 to test with. FWIW, AICS mags feed flawlessly. What you guys think? https://share.icloud.com/photos/06dRwPA89VX4gD8toIsfxWiSg


https://share.icloud.com/photos/07e0yabCERN4tPWHEe1VW6rwQ

Very little use if any on these MKII magazines. To be honest it’s just too much trouble to try and sell them individually so I am selling as one complete package, 15, 20-round and 3, 10-round magazines, 18 in total. Why spend your range time loading magazines? Load them up in the comfort of your own home and spend your time at the range actually shooting! This is great package for high-volume Five-seveN shooters! I’ll cover shipping/Insurance in CONUS. No trades, thanks! $450 takes them. PPFF or Zelle.
(These retail for $50 a piece.)

FN MAGAZINE FIVE-SEVEN 20RD 5.7X28MM BLACK – Qty. 15

MFG Part #: 3866100030
UPC: 818513003018
CAPACITY: 20 ROUNDS
FINISH: BLACK
MATERIAL: Polymer
Dimension: 1.60 X 2.35 X 6.45
CALIBER: 5.7X28MM
HEIGHT: 1.6000
WIDTH: 2.3500
LENGTH: 6.4500

FN MAGAZINE FIVE-SEVEN 10RD 5.7X28MM BLACK – Qty. 3

MFG Part #: 3866100320
UPC: 818513002523
CAPACITY: 10 ROUNDS
FINISH: BLACK
MATERIAL: Polymer
Dimension: 1.35 X 2.65 X 5.85
CALIBER: 5.7X28MM
HEIGHT: 1.3500
WIDTH: 2.6500
LENGTH: 5.8500

Hmmmm....

Leupold Mark 5HD 3.6-18x44 M5C3 TMR
Glass is great, only blemishes on scope are on the edges of the turrets
Sorry my pictures are awful and my camera refuses to take a picture of the reticle

$1450 Shipped

I prefer venmo or zelle but can accept most forms of payment

Trades I would consider +/- cash are
Leupold mk5hd 3.6-18 tremmor 3 or h59
Leupold mk5hd 2-10 CMR
Nightforce atacr 1-8/4-16/4-20 mil
nightforce nxs 3.5-15 mil FFP
nightforce nxs 2.5-10 mil
mcmillian xm3 stock
zermatt/bighorn origin/tl3 short action (action only)
Sig Kilo6k HDX 10x42
Kestrel 5700 AB

Leupold Mark 6 3-18x44 M5B2 H59
Just bought this over on the EE the other day and decided to go a different route
Glass is great no real marks anywhere on the scope other than some light scope ring marks.
Sorry my pictures are awful and my camera refuses to take a picture of the reticle

$1300 Shipped

I prefer venmo or zelle but can accept most forms of payment

Trades I would consider +/- cash are
Leupold mk5hd 3.6-18 tremmor 3 or h59
Leupold mk5hd 2-10 CMR
Nightforce atacr 1-8/4-16/4-20 mil
nightforce nxs 3.5-15 mil FFP
nightforce nxs 2.5-10 mil
mcmillian xm3 stock
zermatt/bighorn origin/tl3 short action (action only)
Sig Kilo6k HDX 10x42
Kestrel 5700 AB

I have several

Surefire, M300 Series or M600AA, M340, or M640. Scoutlight, LED Module 3V Upgrade 250LU/100Mw OF IR, 1, Tan​

$239.99 shipped

Excellent condition Vortex Razor HD GEN II-E SFP w/ VMR-2 MRAD Reticle.

Mounted in a Badger Ordnance 1.93 height mount.

One Hundred Concepts Scope Cap Pro objective lens cover with ARD.

One Hundred Concepts ocular lens Scope Cap.

Subrev RZR-2 throw lever.

Original box w/ case goodies included.

$1100.00 shipped

Paypal F&F preferred.

Building out a LH CZ 457 and I’m in the market for a barrel and some magazines (10 round or more). Let me know what you have!

Hi, looking for an accuracy international AT, would be best with a folding stock and has to be from an experienced user with timestamp photos.

Selling the MDT accessories that are not needed on my new setup. All have a little use from my training setup. The LOP extension was installed, shot for one match and taken off 2 days ago.

FOR SALE:

• ONE MDT QD External weight set: - Like new. Comes will all the OEM mounting hardware and an extra set of black m-lok screws. I liked the all black look when installed on my chassis. Will ship in OEM packaging. PRICE: SOLD PENDING FUNDS

• ONE MDT Non-QD External weight set: - Like new. Comes will all the OEM mounting hardware and an extra set of black m-lok screws. I liked the all black look when installed on my chassis. Will ship in OEM packaging. SOLD

• ONE MDT Length of Pull Extension(EDITED) - Light salt from install and adjustments.see pic. Locks up like new. Comes will the (2) OEM mounting screws if mounting to your Butt Pad. Works perfect. Just decided it wasn't for me. Will ship in OEM packaging. PRICE: SOLD

PM me first to avoid scammers. I will not PM you.

Accepting PayPal FF, Zelle only.

Will ship out first thing next biz day when possible.

Safariland Holster for HKVP9

ALS/SLS level 3 retention

Black color & set up for belt

Like new condition

Sold shipped

Firebird Airwalk shoes

Vics Stealth

Multicam Black 11.5 (Airwalk sized like 12)

I purchased these new on release

worn once to a class

I’m a Merrel guy so skate shoes just aren’t my jam it turns out

Good condition

Sold shipped

Modlite OKW head on Echo Arms M-Lok 18350 body

This can direct mount to M-Lok or used as helmet or body mount

Brand new

$225 shipped

RCBS Full Length die sets
Not running expander balls, won’t include

260 Rem w/.287 SAC Bushing $100 shipped

L.E. Wilson Micrometer Top Arbor seating die

260 rem w/regular and vld seating stems $75 shipped

1 x Otto TAC headset w/mic boom

2 x Yaesu VX-6’s like new with chargers

2 x Signal Sticks (green glow in the dark and pink)

1 x Disco 32 Discus to Bluetooth your smartphone into the radio

1 x Nexus U-94 up lead

Blue Force Gear radio pouch

1 x push to talk

1 x body antenna

You can run these in multiple configs
Everything in like new condition

$1300 takes all, you can even have the CHLK belt if you happen to wear 38

Blue Force Gear CHLK belt in size 38 color black (Combat Helo Load rated Kit)

New condition (open box)

Rated at 3500 pounds

This set up consists of an inner and outer belt.
The outer belt is thin and rigid. Holds gear very positively. Inner belt is very similar to most, softer and pliant.

I purchased 2 of these belts through midway with plans to set up one dedicated to radio/coms. Haven’t got around to using the extra one so I’m letting it go.

No packaging but I’ll package it well for transport sold shipped

RCC Brass 300 Norma

Lathe turned from solid stock

98 pieces

No cloth bag. In loading blocks as seen in photos


$425 shipped

Hawkins heavy tactical one piece mount in 34mm 1.27” had a tangent mounted in it but wasn’t used much at all very nice condition $290

Nightforce ATACR 4x16x50


Bought in July of 2024.





Illuminated Reticle, 100 concept rear optical cover, w/ the Nightforce X-Treme Duty mount.





$2300 obo

I have an OpsCore FAST Ballistic High Cut XP in ranger green, M/L sized.

Helmet is in great condition, little to no use, the internal pads are clean and nice. It wasn’t worn much, It does have a small spot on the exterior that rubbed through the green paint while riding in the lock box for a while, purely cosmetic.

It also includes a Princeton Tec helmet light that has red/white modes.

Will let it go for sold$ shipped,

open to offers or trades for:
Foundation stock (Rimx or impact inlet), quality optics

Factory SCAR 16 parts, prefer to sell all together
FDE stock
Rear sight
Factory trigger
Bottom pic rail
Charging handle
Flash hider
2 mlok sections (PMM I believe)

300.00 takes it all