Rifle only has 115 rounds of reload ammunition through it. Just sits in the safe. Asking $2150 gun and scope shipped. Comes with Vortex 1.8 inch rings. Also has an upgraded Seekins muzzle break. Your FFL must take guns from private sellers. Or local pick up in South Florida. Willing to split the scope and Gun if both are willing to buy. And open to reasonable offers. Thanks Jimmy

Anyone hunting with the S3 4-25? Im building a new coyote rifle (18” 22 GT, McMillan stock) rifle should be about 10lbs-ish.

Trying to decide on a scope in the $1500 range and I do see the S3’s available used in that range. Or is it worth instead trying to find a used S5 3-18 in the $2000 range?

I made my list of scopes I’m considering and of course intrigued by the heaviest and most expensive scope on my list (the Zeiss).

FWIW others I’m considering are the Burris XTR3 3-18 and the Leup Mk4 4.5-18. I would expect the Zeiss to be superior to both but would love to hear from people who are hunting with it.

One new the other shows minor signs of use
$150 shipped for the new and $100 shipped for the used
Thanks

I guess we will see if it actually happens and what files/information will actually be released to the public.

Login to view embedded media
https://www.thegatewaypundit.com/2025/03/breaking-trump-announces-jfk-files-will-be-released/

Just thought I'd ask about what folks have hanging in their house. I'd be the first to admit that I don't know much about it other than the mandatory classes in HS & College I had to take.

We're now at the point where we're starting to hang things on our walls that aren't pictures of ourselves and thus far have settled on two pieces from the same artist which are below:









I can't intellectually say why I liked these particular pieces but I did/do and that's where I'm at.

Anyone here know a thing or two about art and/or want to share some pieces that they enjoy/may have hanging in their home?

-LD

Looking to sell some 1x fired brass. See below:

.300 Norma Mag Lapua brass from factory match berger ammo. 128 pieces - *SOLD*

6.5CM:
Hornady Match Brass 410 pieces
Winchester Brass 175 pieces
Norma Brass 80 pieces
665 total pieces for *SOLD* shipped.

Also have 130x Federal .308 if anyone wants that thrown into the box along with purchase.

Updated Pics

Also due to the amount of scammers sending messages after someone says I’ll take it,
Don’t get scammed…………

I will have a phone call before I take any money….
I can FaceTime with any of the components too



Details:

Action has been sold on another forum....


Manners T6A Mini Chassis Black
I'll need to keep the chassis for another action.


Barrel 1 - Bartlein barrels Medium Palma 1:8 twist - 5/8x24 muzzle threads - 26" barrel, bead blast finish, barrels have "85" stamped for action serial number
600 shipped

Barrel 2 - Bartlein barrels Heavy Palma 1:8 twist - 5/8x24- 26" barrel, bead blast finish
Barrels chambered for 260 Remington, with Lapua Brass, Chambered by Fritz (Black Canyon Customs) before he went out on his own. barrels have "85" stamped for action serial number
600 shipped


Thunder Beast 30BA Brake, not shown
75 shipped

Shipping to lower 48 included in price

Payment:
Paypal FF Only, Venmo, Cash Face to Face, or USPS MO that's it no Zelle or other weird shit.

I’m having grouping issues with my rifle and I’m not completely sure if it’s me or maybe my rifle.

Here’s the setup:
Daniel defense DD4v7 pro
Eotech 1-10 ffp
Eotech cantilever mount
Magpul bipod
Ammo shot in this case was new republic 556
(Have had same results with a few other brands of ammo)

My grouping is terrible. At 100 yards groups are spread at about 4”, most within 3”.



I do feel like I’m half decent with basic marksmanship and can do better. I’m wondering if maybe the cantilever scope mount is just bad for consistency? Everything was torqued down evenly with a calibrated torque wrench.

Just for proof that I can shoot better (maybe not super great), here’s a target that I shot at 100 yards with the following:

Daniel defense DD5v4
Geissele 2 stage trigger
Leupold mk5 5-25 scope
Leupold scope mount
Atlas bipod



What would you guys suggest to check for me to improve the grouping?

Henderson Precision Rifle Stock Rem 700 SA. It is a McMillan U-1 back end bonded to a chassis like front end. The front is solid aluminum with an Arca bottom and mlok panels on the side. It is not light at about 7.2lbs. Great stock just not a fan of thumb hook rears. Has some dings from use. Spacers for LOP adjustment. Top of the foreend is drilled and tapped for a bridge. Very few of these were made.

Any questions just ask!

$800 Shipped only trades would be for 6.5 barrel blanks

I recently received an older used Sightron SIII series scope. It has [per label] 0.125 MOA adjustments and is configured with a Mil-Dot Reticle. Since the manufacturer produced it this way, I assume there is some valid reason for this configuration.

1. What is the reasoning for this type of thing?
2. Are there any good references for getting the most out of this configuration?

Thoughts?

Tikka T3X Lite Roughtech 7rem mag.
Have it cross posted in GB. Looking to consolidate some projects.

$875 shipped to your FFL from an individual.

Been working on reloads for a 6.5CM.
First ill say I am still new with a lot of this and this is a hunting rifle. Not a precision rifle or a really super high end rifle either. But one that I do enjoy to shoot and hunt with.

Finally starting to get somewhere with help from one of the members here. Has been a huge help.
But I also have another question.
When you head to the range and start shooting. Do you start out cold. and record those groups.
Or do you run some sighters or foulers through the gun to get some heat in it before shooting groups for recording data?

The reason I ask is the 3 charge groups I shot last night all were somewhat consistant.
But the first group the first shot I made went low and opened the group up.
taking that one shot out the group and mean radius of the group would be much much smaller.
So just got me thinking if I should run this group again to see what it does if the rifle has some heat in it first.
Here is my original target.

Here is the same target with the 1st target shot dropped. Which was the first shot made with the rifle cold.

Right now just trying to get a charge weight found so I can start working on seating depth tests to see if I can get a smaller group.

Hiding in a deep holler under a natural limestone outcrop with food and water .

No that part is a joke - he was in Woodbridge VA just south of DC. Had no reason to hide until now

If anyone is considering letting go of their Pork Sword I’m in the market. Looking for one here before I go order one new direct. Let me know what you have…

Looking to sell a Remington 700 SA Stainless bolt. It is for a 300wsm. I believe is .532 bolt face. No ejector, ejector spring or firing pin assembly. Came from a rifle a switch over to a .308 bolt

Looking for $200 SOLID

Read down to the end of this... and note Alina Habba's statement that "The congress created federal courts, we can defund them."

So if you are a federal judge (or a circuit court) that is passing activist rulings, playing fast and loose with the law, then you could be either dissoved by Congress or de-funded in the budget.

Trial balloon? Serious strategy? This one Obama-appointed judge who suddenly is throwing sand in the vaseline of the will of the American People... might find himself de-funded or his court entirely dissolved!

Note, too, that the Congress is trying to go on an extended Easter Recess... without finishing up Trump appointments. This includes judicial appointments, which need to continue moving forward. More delay, obfuscate and drag out... while trying to act all "We love America."

Checks and balances come in many flavors! And while the Constitution creates a judiciary branch overseen by a Supreme Court, the makeup of that judiciary branch (and the funding of it) is the work of the other two branches! So Executive and Legislative... get your asses in gear and reform the judiciary that has been weaponized for the last 25+ years (arguably the last 60+ or even the last 90 years) against the Constitution, the other branches and the American people.

Tick Tock folks... don't have forever to solve this before the commies go full commie!

Sirhr

PS. Note that she also recognizes that "People are tired of investigations... they want arrests. We need to make arrests. Not just investigate with no consequences. " Yup. This. With no consequences, we have no judicial system. Just a big roadblock that lets some people get away with murder while targeting others for destruction. All in plain sight with no consequences. Time for that to end. At least someone in .Gov is now saying it out loud!

You know the deal. used, well loved, works great.
decided to upgrade to a garmin and its now just sitting here.
only variance from new ones is that i threw away the cheapo retractable real wire and bought a spare fixed lead.

120 shipped. paypal F&F

Aero Solus Hunter rifle in .308. 20” fluted Ballistic Advantage barrel has 120 rounds through. Carbon Fiber AG composites adjustable hunter stock with Area 419 rail installed. Trigger tech field trigger. Will also include BNIB 20” Proof CF origin/solus prefit in 6.5CM and BNIB Solus action wrench. $2500 shipped.

Scope and suppressor not included.

Hi friend
Eotech and mount for $550 ship.
like brand new, without any issue just use it once at the range.
Payment accept: Vemo, Paypal,Zelle
TRADE FOR 223/556 range ammo
any question 310-357-6026
thanks

Looking for a Gen 1 or 2 magpul PRS stock in black or FDE for the AR10 or AR15. Not looking for any other versions.

For sale, as pictured:
- Zev OZ9C Hypercomp 9mm pistol w/ Compact grip
- Trijicon SRO 5.0 MOA installed to slide
- Zev OZ9 Full size grip
- Zev magwells on both grips
- Magpul 17rd 9mm mags (2)
- Magpul 15rd 9mm mags (2)
- Zev red case with pistol manuals

Items not included, for transparency:
- ZEV optic cut plate
- Trijicon box/manuals

This pistol has about 500 rounds through it, never abused. Only selling as a package, no trades.

$1,600 shipped from me to your FFL within CONUS. Can do a local transaction to a TN resident, message for details.

Excellent condition. Just a couple range trips, never hunted with.

Nightforce ATACR
5-25x56
MOAR
F2
C553

$2000 scope only
$2140 scope and NF rings (A223, 1” height)

I need to read the site rules about where to post this. Hint it’s the PX and you need to be a supporter.

MDT scope mount 34mm low 1.18in
$225 Shipped

I have a 22 dasher barrel for lone peak/impact actions.


Hawk hill 26" 6.5 twist comp contour, 10 rounds on it. 650$