Virtuous concept flar mk2 rail for flux $350
Cmmg mk4 5.7x28 bcg $250
Scar rail by aim $200
Tag dev f10 blackout charging handle $90

Everything shipped with these prices

After some feedback on what people are using . Mounts has to have at least 20moa of cant available . Fixed or QD doesn't matter.

In all the years i have been using Sphur , primarily.... I also have Era -Tac and they have been fantastic but here in Aus obtaining them is very very difficult..

Any input and recommendations appreciated..

Holoson eps carry green dot like new. All screws and plates included in the box. 280 shipped. Ppff or venmo

Well, it had a noble mission in the beginning. It’s been turned into nothing but a giant funnel for stealing money from taxpayers and screwing over countries all over the world with strings that they didn’t want.

Massive waste of American money and influence. Because everybody who was involved in, it was a socialist Pushing a non-American agenda.

Fucking awesome!!

I'm building my first AR-15 (JP, 18") and could use some recommendations for optics. I'll be shooting mostly bench and prone 25, 100, and 300yds. Budget is max $1200 (unless you make a strong case).

From what I've found I'm likely looking at a 1-6 or 1-8 LPVO, or something like a 2-10 with a possible offset RD. I'd really appreciate any thoughts on what makes the most sense for this!

So as I re-learned how to clean my rifle and properly use a borescope (cleaning use only!), I noticed a "trend" and was wondering if this is real or just luck.

It seemed my smaller bores fouled faster. My 6mm has the ring, while my 6.5s had some buildup, My 30 cal chambers were like "Carbon? WTF is Carbon" . Granted I shot a TON of 6.5 vs 308 (both with brakes and suppressed) and the other 30 cal is a magnum so round count tends to be low. Is it just a rule of thumb that smaller bores tend to foul up faster or did I just draw some lucky conclusions.

Looking to buy a Botnia maxi 5/8x24 send me a message

I have not purchased reloading supplies in quite a while. Normally I will stack deep essentials when the opportunity arises.

Specifically I am looking at adding more primers but I have noticed that prices are still elevated. I still have a stash so I am not in a hurry but it would be nice to top up.

Ideally I will buy CCI 400 and CCI 500 as my primary staples so those typically get preferable treatment. At first glance I saw some Magtech that were cheap but I have no experience with them.

My main question is which aggregation sites do you guys like to use? I used to frequent AmmoSeek but I'm not sure if there are others that I should be looking at as well.

Any other suggestions for places to frequent would be helpful. The regular ones like Midway, Natches, Powder Valley are on the list but I recently priced out the exact same product at one site vs another and for the exact same product one was over $50 more expensive even though they had a 'sale' going on and had free hazmat. In other words the regular price including shipping and hazmat at one site was cheaper than the sale price w/free hazmat.

Basically put it still seems sort of like a free for all as far as supplies go so I am seeking additional input from the peanut gallery.

A while back I remember reading about replacement ear pieces for the Otto Noizebarrier's that improved comfort / performance. Anyone got a recommendation? I finally got the Otto's and I want to have some extras on hand for the summer season.

MOAR-T Reticle 2nd Focal Plane ​

Includes sun shade and front nightforce cap.

Scopes in good shape has some wear but performs as it should glass is in good shape also no scratches.

Would trade for a tango 4000 with cash on top
$2000 Shipped

SOLD

Used for a couple of months; some marks at the bottom that is not visible when installed.

$55.00 shipped no trades.

Terms of sale:

I only accept: venmo friends family, apple pay. I do not take zelle. Price is net to me. No mentions in the payment.

Important: Please post "I will take it" below and pm me your address and tell me how you would like to pay.

Payment has to be completed same day, otherwise i will move on to the next interested party; therefore I encourage" SECONDS" posts on the thread.

Hi there!


I´m looking for a legacy AICS chassis in LA for an AWM clone build in .300WM. I´d prefer an oldest generation AICS 1.5 LA variant in OD green and I´d be willing to spend up to 2000 USD + shipping/import taxes. I´d also consider the AICS 1.0, the 2.0 variant, different colors, painted ones, the SA versions or the second newest generation with the metal sling loops. Since I live in Germany, you´d have be okay with shipping it to Europe. If you have one for sale, but it´s not in the mentioned price range, feel free to contact me and we can discuss prices.


Greetings from Germany,

Nicolas

Dreadtec Carbon Savage Prefit 6.5 Creedmoor 1:8 New in Box

Hey guys,
when you start reloading / testing a new bullet, how much do you set your bullet back from the lands?
No BR-loads, which I know, some do set the bullets right into the lands, but for "normal" rifles.

I´m starting f.e. with the
- .224ish set back around .02"
- .308ish set back around .04"

Where do you start and how close to the lands would you go?

Selling things that don’t get shot.

SOLD Terminus Zeus QC $1300
-308 bolt face
-Trigger Tech Diamond
-Less than 2 boxes of 6.5cm fired, bought it barely used and never shot it.

SOLD Proof Zeus QC prefit New, never shot $600
-6cm 1-7.5
-26” Comp Contour
-Cerakoted


SOLD PVA prefit 22cm 1-8 $400
-bought used off the hide 700rds fired
-20” Carbon Fiber
-Xcaliber blank

Little B brake

SOLD McMillan A5 Adjustable NEW $900
-Arid camo
-McMillan ARCA
-McMillan long pic rail also
-Hawkins DBM

$3000 you can have the whole setup with both barrels. I’ve got 3 different boxes of factory 22cm and 7 boxes of hornady and FGMM 6cm ammo

PM me all offers and questions, I will not reach out to you.

No Trades. PayPal friends and family, CashApp or Venmo.

Vortex viper 4-16x50 moa 30mil tube. Top turret exposed and side turrets capped. Glass is like new. SFP BDC reticle $350 obo

I have 1 box plus a few extra of once fired 300
PRC ADG brass. $55 shipped.

Nice Used MPA BA 34mm Scope Mount 1.25 0 MOA ............SOLDShipped .........

Spuhr 4002 as seen Sold

Spuhr 4602 Sold

Accutac Bipod sold

Leofoto Bino Mount with Stud $50

Spuhr Raptor Rail Sold

OBI Link system $70

LaRue 5/8” riser $100

Trigger Tech Primary like new sold

I have more stuff to add

This scope is currently on the rifle. I may start breaking it all down tonight. Here is a link to the complete rifle and breakdown. If you have any questions, feel free to ask. Thanks

Is this business legit? Selling $1300 scopes for $900 with free shipping. I know it says "open box" but still. Anyone do any business with them? thanks rob

Considering loading precision rifle rounds on a Dillon 550. Proposed order of operation, station 1 sizing die, station 2 mandrel die, station 3 powder funnel, station 4 seating die.

I use a universal decapping die and prime off the press so those steps aren't going to be moved to the 550.

Is anyone sizing and seating on the same tool head? If so what results or issues have you seen?

I’ve got this used Nightforce CFS for sale. Glass in in excellent condition. Comes with the cage kit. Sold

Full power Peq15 in excellent condition. Date of manufacture is Dec 2021.

$1650 shipped.