Got a 22 cal 1:7 mtu ready for someone’s next 22gt or something fun. 28 incher so can be cut to whatever you’d like. Cryo treated as well. Asking 500

Login to view embedded media
If you taz someone 53times their heart will stop .

These Oklahoma deputies did just that tazed a man 53 times while he lay on the ground and begged for his life - His crime - running down the road .

I knew they loved electro torture - but they even crossed the streams - using up to 3 tazers simultaneously while he begged for his life . Until his heart stopped
And then applied a choke hold just to make sure .

He was fairly young healthy guy so the numbers may vary for old ladies and kids but at least now they have a control number of 53to work with .

FS is a great condition arca mount that cinch to the bino tube for spotting. New they are 50 plus taxes and shipping

I have one impact action wrench and one defiance rem 700 action wrench.

80 dollars shipped and insured a piece

Used for two matches. Looking to trade for a like new Zco 5-27 1x 10 mil nle or a tt jtac

Would let it go for 4100. I can send a million pics to a serious buyer.

Wanted to get some help from you guys. Shot these last night, started out wanting to find max for my setup (that's why I jammed .010). After shooting the first 3 I changed a few things up. I only have tonight to load ammo, I'm leaving tomorrow for our property that has 300 yard range and would like to try and get as much info as I can to narrow down a good load. Should I shoot a couple of ladder tests? If so what powder range should I start and end at? Should I use the chronograph (magnaspeed)? By the way I have not found pressure signs yet. Thanks. These were shot at 100 Yards. I have a brother in law competition every Thanksgiving at 500 yards for smallest 5 shot group. I know a lot of you don't do that but a plastic crown is at stake and I hate loosing it to them!

6 creedmoor
trigger tech diamond-8oz
26 inch pva 7.5 shouldered barrel
origin action
virgin lapua small primer brass
reloader 16
cci br4 primers
berger hybrid 105

Geissele SSA-X Lightning Bow trigger. Pullout from a new right so probably test fired. Comes with pins, no package.

$165 PP F&F

Very nice factory Colt M16A1 fully transferable on a form 4 in Oklahoma. Only small trade of interest would be a shorter 308 bolt gun with carbon fiber barrel.
$42,500

Fall of Saigon.



The 10,000 day war...

Sirhr

looking for a set of vudoo 360 extractors. Or a vender to buy from.

Is this for real?

Hey all,

The tremor 3 reticle has the wind markers set in 4mph graduations. Say with the gun setup i have and the ammo used, I would sit the 1st dot (4mph) in a 3 mph wind and get a hit. Would that mean that the windage adjustment for my rifle is in 3mph graduations?

Hey all, I am shooting my 2nd match ever and my first 2 day match this weekend and am putting this out to see if anyone has any tips or tricks for me going into this. My main goal is to have some fun and learn but ideally I’d like to not zero out half the match, so if anyone has any wisdom they can impart I’d sure love to hear it!

Selling a Nero 556 muzzle brake made by Walker Defense. Threaded 1/2x28. Asking $100 shipped. Venmo only

Kahles K540i 5-40x56 DLR CCW SKMR4+ w-left Windage $4,599.00
https://cstactical.com/kahles-k540i-5-40x56-dlr-ccw-skmr4-10721/

New for 2025, the Kahles K540i 5-40x56i sets a new standard for long range optical performance. When compared to its predecessor the K525i, the K540i 5-40x56i boasts a massive 40% wider field of view, measuring in at 30.6 feet – 3.9 feet @ 100 yards. The K540i has also been optimized with an exceptionally comfortable eyebox even when set to the highest magnification. Additionally, the K540i is available with a massive assortment of reticles designs – all of which are illuminated.

Features of the Kahles K540i 5-40x56i:
Revolutionary optical design with a 40% wider field of view (compared to the K525i)
Perfect optical performance with 8x zoom over the entire adjustment range
Exceptionally comfortable eyebox even at 40X magnification
Windage adjustment available left or right with TWIST GUARD rotation protection
Patented parallax adjustment integrated in the elevation turret (20 m to infinity)
160 clicks per rotation – absolutely reliable repeat accuracy and clearly defined clicks
Precise illuminated reticle in 1st focal plane




Login to view embedded media

After some feedback on what people are using . Mounts has to have at least 20moa of cant available . Fixed or QD doesn't matter.

In all the years i have been using Sphur , primarily.... I also have Era -Tac and they have been fantastic but here in Aus obtaining them is very very difficult..

Any input and recommendations appreciated..

I’m aware of the usual recommendations when it comes to quality 10/22 barrels, but I really don’t want to spend $425+ on a barrel.

I was gifted a 10/22 takedown and I want to make a decent backpack gun out of it. It’s got a nice trigger and a Boyd’s thumbhole stock, but I have a Magpul Hunter for it now. The stock is odg, and I’m going for either the black on odg or fde on odg aesthetic.

I want to get a threaded 16” bull barrel and a lightweight scope for it. I found Mikes Stocks on eBay. He sells blued fluted takedown barrels for $225ish.

Does anyone have experience with his barrels? I don’t need world class accuracy, but reliability is a big factor.

Thanks for any input!

Looking for a Proof 6 arc barrel 18-20inch. Or 22 arc 18-20in.

Gathering funds for another project.
Currently running 140 hybrids @3050fps Consistent groups in the .3-.4’s
Had 156gr Berger Elites @2920
576 documented rounds
Weight: 9.39lbs (pictured)

• Lone Peak nitride MEDIUM XM Fuzion action
• 26" Carbon Proof 1-8 twist Sendero
• McMillan A5 Carbon Stock - Sonoran Carbon Ambush
• 2 QD flush cups (left side)
• McMillan 6" Arca Rail
• Area 419 Hellfire Brake
• Chambered by Preece Precision - 6.5 SAUM (roughly 180 freebore)
• Bedded by Preece Precision
• TriggerTech - Diamond Pro Curve Trigger
• Hawkins XM Bottom Metal
• Inflection Medium Magazine
• MDT Medium Magazine (cut to 5rd by Kinport)
• Wiebad cheekpad / SAP 2rd holder

Will include

• Redding Type S Bushing Die set
• 195 pieces of ADG Brass
• 750 Berger 140 Hybrids
• 13 loaded rounds w/140 hybrids @3050fps

$2,950 OBO shipped for everything listed.

Great condition. I moved to a double pull.

Arca attachment. Comes with the SAP knob for can’t adjustment and I replaced the “skateboard” style tape on the legs with FDE talon grip tape.

$500 shipped via Paypal F&F, Venmo, or Zelle.

All components are RRS. Not willing to part and selling as a package.
Includes the following :

Really Right Stuff BC-18 Micro Ball Head​

Really Right Stuff B2-LR-II Lever-Release Clamp (60mm)​

Really Right Stuff Multi-Purpose 7.1"/180mm Cinema Rail MPR-C-180​

RRS Plate not included
Price is $200 shipped

Have been painted, but should come off easy enough.
0.97” height.

$OLD shipped.

PM me first, I will not PM you.
Anyone else is a scammer.

Here's the problem: custom built M700, with a 24" Shilen 1-10 , reamer a .308-M852. Rifle is a tack driver with all factory Match ammo/sub 1/2 MOA. When I put my Banish suppressor on, either a 7" or 9" .308, I can't get the bolt open with ANY factory Match ammo (the same factory ammo that shot fine W/OUT the suppressor), or my hand loads. Take the suppressor off, no problem....suppressor on...PROBLEM! Silencer Central and Banish had NO answer for the problem.

Comments/opinions?

20" barrel
Magpul edition
Shot 5 rds to zero the dot. Other than that it's new. Will come in factory box with accessories.

No red dot included.
900$ shipped

Is there a way to get rid of several conversations at once? The only way I am seeing to delete one is to go into each conversation and select "leave" (and then change it to ignore, because I don't want to continue it). Am I blind? Thanks.