Vortex Razor HD 1-6 Gen II - E with JM-1 reticle.
Comes with original box and Scalarworks 1.93 mount.
1250

[WTS] MDT folder adapter / 35mm Vortex

I am selling an MDT folder that I didn’t end up using for a PRS styled build. Completely new. 0 rounds fired. Fixed to fixed.

$140 shipped

Also selling 35mm vortex rings. Went with a 1 piece mount instead. $80 shipped

Take both for $200

PP/FF / ZELLE. Comment then chat. I WILL NOT MESSAGE YOU.

Thanks for looking!

Looking to buy the following

Xm2010
Remington PSR
Surgeon/remington CSR

And different Racs chassis

Hello, fellow Hide members

Up for sale is a awesome , one of a kind, long range killing machine, this rifle deserves to be out west slaying trophies for the wall or freezer.. another year has past and my dream of heading west to hunt has fallen apart..

Black Canyon Customs aka Fritz built the original rifle, after receiving the rifle I decided the stock was a bit short and I needed a higher cheek weld. Good timing as McMillan had just released a new model,, the ELR Hunter. Greg @ Bugholes was kind enough to do a professional bedding job for me! Now for the gun porn! Specs…

Lone Peak Fusion TI Alpine Cut
Bartlein CF m24 1-8 24”
Terminator T3 3/4x24
TT Diamond Flat shoe
McMillan ELR Hunter w Edge fill
Wyatt’s 7 PRC kit
Hawkins m5 Oberndorf
Cerakote barrel and brake- Gun metal gray
Rifle weight 7lbs 5 oz w ELR stock
LOP w Flat shoe 14”

Extras included in price

Whidden Dies-NIB never used
Peterson Brass x150 (100 primed, prepped)
RCC Brass x99 (49 primed, prepped)
Copper Creek Modified Case
Amp Pilot
Hornady brass x 100 ( fired 100 rounds factory loaded ammo for break in)
Spuhr 34mm rings

Price $5555.00
PP FF, Venmo, Certified Bank CK must clear before releasing from the gun dealer..Sorry I have no way to take a CC or EBT card
Shipped to your FFL from my FFL

Rifle will ship in a cheap hard case!
Insurance is on the buyer. Happy to FaceTime w rifle & supplies, PM for my cell..

Located in Eastern Tennessee if someone wants to meet. I will add pics.

Just another thread about a bad Timney Hit trigger and even worse Timney Customer Service. I am putting together a Solus Barreled action and decided to try a Timney Hit trigger in it as they were on sale. When I got the trigger I needed to remove the Remington Style bolt release so I followed their instructions on this process from their YouTube video on this subject. I removed the "E" clip from the lower position and removed the upper "e" clipped pin and put the top pin back in. In their instructions they said the lower pin was not necessary if you were not using the Remington bolt release...so I left it off. Went and pulled the rifle out of the safe monday and the trigger blade fell out of the rifle and onto the floor when I picked it up.

So I contact their customer service and told them the story. The person wrote me back that they'll send me a new pin and a spring and the I was not supposed to drive out the second lower pin with a punch. I replied back that I did not drive it out with a punch and that something was wrong with the trigger as it just kind of fell apart. They did reply that they would send me an RMA number to return it for repair. I told them I was not thrilled about having to send a brand new trigger in that has never even been fired. Replaced the trigger with a Trigger Tech special I had and when I went to put the rifle back in the safe I saw the pin laying on the floor in front or the safe. I got a flashlight and found the spring as well. I put the trigger back together and sure enough...The pin would just slide through the housing with no resistance at all. I took the trigger to the shop and carefully held the pin with a small pair of pliers and peened the end of the pin until the pin had to be driven in with a punch. Replied to Timney to cancel the RMA as I found the parts and repaired the trigger myself.

Thankfully I worked my way through college in a machine shop, had a small shop for several years and built pulling tractor chassis as well as built and tuned 1911/2011's and Smith & Wesson revolvers. I was surprised that in this day and age that Timney didn't want the trigger back as it was apparent that first, it had a manufacturing defect and two... a customer had just told them the they repaired a trigger that they manufacture. I'm not at all thrilled by their trigger and their response and this will be the last Timney Trigger I buy.

Unfired. $1250 takes it. Would entertain trades for nightforce 2.5-20

Hi-Lux 2-10 Vtac used $150
Hi-Lux 1-4 CMR used $100
Kruger Optical 2.5-10 NIB $150
Warne Ramp 1” Mount NIB $100
Black Spider Optics “Spikes Tactical” RDS NIB $80

All prices plus shipping if you want more than 1 we can work out a deal.

Remington XCR II in 338 Ultra Mag

Rifle has been shot less than 75 times. I’m the second owner the previous owner was on TBH which is where I bought it. After I got the rifle it was threaded, bedded and trued this was done by a gunsmith in Hempstead TX. I have all reloading equipment for it. It shot under MOA with factory ammo but with 250 bergers it will stack them on top of each other with single digit SD and ES. I’ve shot several 3” groups at 800 yds. It was super easy to load for. Not pushing it at 2780 with Berger 250 OTM. I bought a suppressor in 30 cal and don’t plan on getting any bigger so this one needs a new home. It also comes with hs stock (installed) and the original Remington stock and talley 30mm rings and bases. 1300 OBO. 2000 with all ammo and components listed.

The following ammo and reloading is available for the 338 RUM not selling before the rifle sells.Easily over $1000.
2-boxes(full) of Remington 250gr psp
1-box (full) Remington 250 Swift A-frame
2-boxes (full) Nosler custom 225 Accubond
15-cartridges Barnes 225 TTSX
2- boxes of Berger 250 OTM
1.5 -boxes (75)of Berger 300 Hybrid
1-box ADG brass with 25 loaded that shoots really well. I have the load that was made. Also some loaded that shot ok I didn’t pull and could use as foulers
RCSB dies

Selling my 20" Anschutz AI 54.18 22 rimfire. Only trade would be for an AT-XC (plus).

Only selling to aquire an AT-XC.

Rifle has 50 rounds of CenterX through it, and is more accurate than the Gen1 Vudoo and 360 that I had.

It comes with additional matching sage green folder adapter and full length too rail ($500 add on). Comes with all original papers, test target, and case.
I also added the straight trigger found on the 1727F model and include the original.

TBAC suppressor not included.

Retail new without extras is: $4495
Slightly over $5k as it sits.

Asking $4350 now $4200!! shipped.

TRIGGERTECH DIAMOND 700

*Used* Single stage, flat face trigger. RH safety. Slave pins included. $SOLD$ shipped.

Brand new, never mounted/never shot, EoTech OGL (On Gun Laser) Full Power with green Vis laser. This is the Grey colored unit, full kit with all original factory included items. This has been functioned tested. Full Power, 105 mW VCSEL IR, 30mW Vis laser. Production unit MFG 03/2025.

Happy to provide any additional details or discuss.

$2800 $3000 Shipped and insured UPS / PayPal FF or possible other options.

SOLDDDD

Up for sale is a Tangent Theta TT525P (Gen3XR Mil) that was sent to Armament Technology for the AIF conversion. Scope is in excellent condition with flawless glass.

Last time out, it easily handled 1000-yard targets at Pawnee Gun Club, outperforming a group of Marines who were training there. This scope simply delivers. Edge-to-edge clarity, repeatable tracking, and the kind of reliability you expect from Tangent Theta.

$Sold

• Original box w/ manual & killflash
• TT525P scope
• Scope caps
• Tangent stackable sunshade
• Charlie Tarac adapter

Does not include:
Anything not listed above.

These are currently retailing above $6K and good luck finding one in stock.
Prices includes insured Continental USA shipping (buyer covers transaction fees and shipping outside of US).

Serious inquiries only. No trades. Thanks for looking.

Snag her up so I can get another optic. Cash is king, the only trades are higher mag optics with T3/T5 reticle (Atacr/ZCO/S&B only for the most part)

Zelle/venmo or check only.

For sale, used atlas V8 bipod with ARCA mount

Asking SOLD shipped.

PP F&F or zelle.

TTi Sand Viper 9mm has a SRO on it currently.
$7500 - Updated to current photos with SRO.

Gun has only been shot 1 time.

Unopened Lapua .260 Rem Brass 100 Rounds. $100

Anyone ever seen the reticle break on an USO MST-100?

I've sent an email, but since it's Sunday I know I probably won't hear back for a few days. Just curious if anyone has any firsthand experience and whether they can/will fix it?

Pic attached - it broke right below the bottom mil-dot on the lower vertical crosshair. Mounted to M40A1, 330 rounds through it, no abuse.

I wanted to let everyone know we are working to produce some of the missing MSR/PSR parts. These are awesome rifles, but it seems like there are more chassis’s and actions than bolt bodies and other small parts.

Currently we are working on the bolt stop, bolt body, and firing pin assembly.

If anyone has knowledge about the system,
experience or connections in producing a small run of parts like this please let me know.

Please comment with which parts you need as well as the quantity.

I will keep everyone updated with the progress here as well.

The parts will be marked to indicate that they are not factory original parts. But should function and appear like the factory parts.

When we get to production, Kace at Raider Outdoors will be handling distribution in a separate post. https://raideroutdoors.com/

I have a brand new in the box Savage Axis 2 Pro in 7mm-08 in forest camo for sale. It has a 20" barrel and weighs 6.8 pounds.

Will ship from my FFL to your FFL.

$475 shipped from my FFL.

Might trade for a scope, binoculars, or possibly a 10mm pistol.

I can get anyone any pictures they would like, but gun is brand new never fired.

I've been living in the land of prefits for my Zermatt actions. I have access to a reamer and a barrel that I'd like to get chambered and threaded. Don't mind sending my action in if it makes it that much better.

Looking for recommendations on someone trustworthy that would do a good job dialing it in and cutting it. Wait time isn't super crucial but I've been quoted 8 weeks by a couple. Price isn't the determining factor but I've seen some that are quite high IMO. I don't have anyone local that's worth a crap so I've all but decided to ship it all out. In NW AR. if it happens to matter.

Just looking to see who you would trust to chamber an expensive barrel.

I bought this barrel as back up for my TL3 that already had a proof 6.5CM barrel. The current barrel just kept going while this barrel just sits on the shelf. It's a 24" Competition Contour with 1:8 twist and threaded.

SOLD
$500 plus actual shipping/insurance.

I’ve got over 1000 pieces of alpha OCD 1xf 6GT brass looking to offload.

Some loose, some in mgm cases.

.90c each, if you buy in bulk we can chat discounts.

PM for any questions

Brand new larue 20” 6.5 larue MRGG
$4500 shipped

Life circumstances have changed, cleaning out personal gear. All must go, if I'm way off on price, politely tell me. Im posting a bunch of items so pics are generalized. If you're a serious buyer and want more information and specific pics, plz ask. Im not on this often, I'll try and check every 24hrs.

Public 'I'll take it' trumps all

There's items with mounts and accessories in the pics, unless it's stated in the title, they're not included

State item in PM title

Prices are all 'Shipped' with NO INSURANCE. Any insurance that is desired is on the buyer.





Optics:
[ ] Used Leupold santium 15x56 (7/10 $800)
[ ] BNIB Vortex razor uhd12 (10/10 $1100)
[ ] Vortex razor spotter (8/10 $1k)
[ ] Leupold BX-4 range HD (9/10 $1100)
[ ] BNIB Impact 4000 ($1K)

[ ] Kahles k64i w/ sphur & A1st lvl (8/10 $1950)
[ ] (Brand new never used, came without box) Kahles skmr4 DLR (10/10 $2800)
[ ] Used Silco radius, no cable (7/10 $700)
[ ] Nf beast h59 (8/10 $2800)
[ ] Nf Atacr 7-35 mil C (9/10 $2750)
[ ] Bushnell xrs2 h59 blk (9/10 $800)
[ ] Bushnell xr2 g3 brn (9/10 $800)
[ ] BNIB Mk5 7-35 PR2 ($1850)
[ ] BNIB Mk5 5-25 PR2 FDE ($1950)
[ ] Mk5 5-25 TMR w/ rings ($1700)
[ ] BNIB US optics TS-25× JVCR ($700)
[ ] Vortex hst 6-24- (9/10 $500)