For sale like new Atlas Gunworks grip for Staccato. This is recently released Atlas grip made specifically for Staccato 2011 models (WILL NOT FIT THE C, CS and HD) and it shouldn't require any fitting for XC (mine didn't). I got an offer to sell my XC but buyer wanted the original grip, so I have the Atlas grip left. The grip has been cerakoted, comes with new set of bushings, blue Atlas trigger, mag release, Cheely XL magwell, magwell pin, mainspring housing, pinned grip safety...everything you see on last 2 pics (no Staccato XC is not included ;-), funny that I have to say that).
Asking for $750 shipped to lower 48 states for everything listed above, payment via PayPal F&F (discreet, no description), Zelle, Venmo and Cash App.

From Atlas (my XC didn't need any fitting at all) https://atlasgunworks.com/product-details?id=266060208:
This kit is designed to upgrade all current (WILL NOT FIT THE C, CS and HD) Staccato 2011 models. Please note that this is not a drop-in conversion kit—fitting requires professional installation by a trained gunsmith to ensure proper function and safety. Any modification to factory-installed safety features must undergo thorough evaluation to ensure their continued effectiveness and functionality. It is essential that all safety protocols are rigorously tested and verified in a controlled environment. Live ammunition must not be used unless all safety mechanisms have been fully confirmed to be operating as intended.

I read on RFC that the 457 is possibly close to release, and is already listing at Lipsey's

https://www.lipseys.com/itemdetail.aspx?itemno=CZ02356

Anyone have any insider knowledge about this one? According to the description it has a nitride finish, 60 degree bolt throw and is drilled/tapped for a scope mount.

Vortex Razor HD LHT 4.5-22x50: 1100 shipped
XLR-2 MRAD reticle. Like new condition, one minor blemish on the top turret. Comes with original box, new caps, throw lever, factory caps, other small parts. Optic details: https://vortexoptics.com/razor-hd-lht-45-22x50-ffp+reticle-XLR-2~MRAD

Selling to get funds ready for an upcoming move. Trade offers welcome, but primarily interested in LMT/URGI parts only. Thanks for looking!
Most electronic payment methods accepted. Happy to provide further feedback/verification on other sites.

very little used Aimpoint Acro P-2 for sale ($475 shipped in lower 48) Reptilia mount for Acro P-2 is available ($80 shipped in lower 48). Payment via PayPal F&F (no comments), Zelle, Venmo or Cash App.

Still has the sticker on the screen. It’s brand new and only comes with the little pouch
$450 shipped and insured
Zelle, cash app, usps mo, cert check, apple pay

In squad 3 $250 payment via Zelle, cash app, Apple Pay.
Match is August 1st

Very clean Smith & Wesson snub nose Model 36 revolver chambered in 38 Special.

$675 Shipped

PayPal Accepted

Tikka T3X/CTR (6.5 Creedmoor): 1325 Shipped
-24" barrel, great condition. Less than 550 rounds fired
-KRG X-Ray (Sako Green) (w/box if desired)
-Mountain Tactical 20 MOA Rail
-Yo Dave trigger spring
-x1 AICS magazine + Multicam magazine pouch
-ARCA rail, flash hider, other small parts

Selling to get funds ready for an upcoming move. Trade offers welcome, but primarily interested in LMT/URGI parts only. Thanks for looking!
Will be shipped to an FFL of the buyer's choosing, buyer has responsibility to follow all state laws, etc etc. Most electronic payment methods accepted.
Happy to provide further feedback/verification on other sites.

I have some great glass and wind meter up for sale all prices include shipping insurance is extra
Vortex recon 1 450
Wind zero 500
Swarovski cls 15x56 1500
Nightforce cfs c656 2500

New in bag size 32R Crye field pants in ranger green. SOLD

Tru spec BDU top/pants medium regular $25 shipped.

I been loading 6.5CM for some years now I have always full length size then ran a mandrel to get desired neck tension. Soon I will start loading for a 7 PRC and am curious but mostly ignorant, is a bushing die meant to replace mandrel use? Or do you guys run both for some reason?

Thinking about going bushing this time around to try something new and just wondering if it’s necessary for me to invest in 7 PRC mandrel as well.

Thanks and don’t be so hard on a noob.

CZ Accushadow 2 (9mm): 1825 shipped
-Like new condition, less than 150 rounds fired
-Comes with original box, test target, paperwork, accessories
-x3 magazines

Selling to get funds ready for an upcoming move. Trade offers welcome, but primarily interested in LMT/URGI parts only. Thanks for looking!
Will be shipped to an FFL of the buyer's choosing, buyer has responsibility to follow all state laws, etc etc. Most electronic payment methods accepted.
Happy to provide further feedback/verification on other sites.

For sale or trade is a NIB Pristine brand short action with 90 degree bolt, 308 bolt face in bronze. REM 700 footprint, BDL/AICS cut, and takes savage small shank barrel threads. Floating, replaceable, 6-lug bolt heads. Horizontally placed bolt stop will not interfere with stocks/chassis. Bronze coated receiver and black (slick) coated bolt. Comes with 20 MOA factory rail. I bought this and was going to use this for a short action build. I've changed my mind and now i'm looking to do a long action build.
$775 shipped to an ffl who will accept from shipment from a private seller or possible trade for a zermatt origin long action.

I’m selling a gently used Atlas CAL with 2 screw clamp as pictured
Also included a cheap piccatiny rail to QD attachment.
PayPal F&F or Venmo only
First to PM and post will own it.
SOLD

The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.
The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.
Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.”
It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.

• Height Range: 4.9 – 9.2″ (6.4” at 90°)
• Preloaded Cant: 63 degrees
• Position Button 0.5″ diameter
• 5 leg positions: 0, 45, 90, 135 & 180 degrees
• Non-Rotating Legs: outer leg does not rotate around inner leg
• Larger, stronger inner legs
• Weight: 12.9 ounces
• Footprint: 9–12.5″

In as new condition not loading BR anymore

$75 shipped
PP F&F

New, mounted but never fired. Realized I didn’t need the 20 MOA incline.

$180 shipped
PP F&F

This weekend went to my first range that you could shoot 1000 plus. Looking at 300 PRC Browning xbolt long range and the Bergara B-14 hmr which would you all suggest over these? Also need some ideas on scopes. I have a couple PST Gen 2s found out they don’t have enough adjustment to shoot a mile. Looking for something entry level that’s decent I live 7 hours to closest range to be able to shoot that

Ok, no more drip feeding, it's time for full fire hose.

The VGW V-22 is a true-to-scale mid-lock rimfire bolt action with integral recoil lug. One of the many unique features of this design is, for a mid-lock, there are no lug ways forward of the lug abutment in the receiver. The rail is MilStd 1913, available in 0, 25 and 30 MOA. The action is currently in full production and available from Vudoo Gun Works in St. George, UT.

















This rifle has no finish on it yet and of course, it uses my AICS patterned magazine that is currently fielded in many 40X Repeater Conversions. The action is a direct drop in to any Rem700 Short Action Stock or Chassis, with the only accommodation being the ejection port is shorter than the standard Rem700/40X length port. Unlike the 40X Rimfire, the lugs in the VGW V-22 are concealed.

I'll be spending more time on the range tomorrow and will post video of it cycling, but it runs like a Swiss watch.

Thanks, Guys....

MB

Okay we did a live on this topic as this is something we are looking at more and more. We already know we are going to higher rings. The AR15 world has going to higher Risers and now the bolt action world should follow. For a while now I have been taking about 1.375" to 1.55" as the rings I look for today. I don't go low, I stay high to keep my head up. Well saying this repeatedly has lead to Chris getting a 1" AR Riser for his bolt gun.


So this week I jumped in to look at this and felt it was better. My biggest concern was prone, and prone even for me was very comfortable.

I wanted to talk about this, today Chris and I jumped on a LIVE and recorded our thoughts.

Login to view embedded media
The graphic Chris drew is a touch light on the screen, so here is the image.


For reference:

Measurement for Chris was 7"
Measurement for Me was 5"
The Rifles averaged 3.75" with the Knights being the lowest at 2.75" scope over bore height.

This is a thought, an experiment, so we want to your opinions ... we know the immediate negatives what are some we might have missed ?

Just mounted this on a rifle and the guy didnt care for the reticle. Just pulled it off after 8 rounds. Literally mounted for less then 30 minutes at the range.

Dropped. $1375 shipped

Venmo, paypal FF.

Barrett MRAD .308 17” 1:8 twist. TBAC ultra SR muzzle brake. Bolt face, 200rds on it. Looking to sell for $850 shipped or trade for other MRAD barrels. Open to 6.5 creedmoor 24” .308, 7prc, 7 rem mag, .300 win mag or .300 prc.

The bedding near my recoil lug is cracked. I want to fix it the correct way. I imagine copying what was done at the factory is my best bet. How can I ‘restore’ this bedding?

I’ve read that there should be no bedding at the front of the recoil lug and it appears this is what was done at the factory.

I have been looking as you all can see, if u dont care lets see some pics of your rifles just to give me a better idea of what i am looking for. Not alot people around here are into this like I am. If u dont wont to showem I understand that to.

I just received a replacement barrel for my Accuracy International AT-X from a reputable vendor. I have not shot the new barrel yet, or even installed it.

The original barrel is well over 3,000 rounds, while it is still shooting acceptably well, I realize I'm on borrowed time as I shoot a lot.

I hate to be "that guy" with a borescope, but I was looking at the leade/throat area, and it has some marks where the rifling begins that concern me. I'm attaching a photo below, there are virtually identical marks on all 5 groves. I don't recall these marks on the original barrel. I also have a newer Proof Research Barrel that does not have any marks like these.

I really don't care as long as the barrel hammers, but the factory barrel set a pretty high bar, it has historically shot in the .2 - .4 MOA range with handloads for 5 rounds at 100 yards.

Are these marks in the rifling a cause for concern? Do you think I should contact the vendor? Should I just shoot this thing? What would you do?

It's an $1,100 barrel using a Bartlein blank, I just don't want to be disappointed with its performance and be stuck with it if there's an issue.

Borescope video:
Login to view embedded media

I have a long tenure and flawless history on Rokslide, but haven’t spent much time on SH historically.

** edit to be clear. This is not a Tac-Ops rifle as made by Tactical Operations. It is in the style of some of their models of rifle based on the components. I am not trying to misrepresent anything, this is just not my area of expertise.

This is an early (2009) Snowy Mountain Rifles Tac-ops style 308 Winchester. Action is a rem 700 footprint, stock is a McMillan, comes with two, single stack metal mags. Stock is not inlet for M5 bottom metal. Barrel is 24”. Muzzle brake is removable. Rifle was stored in a humidity-controlled gun room.

Rifle was built for friend’s dad who was a Doctor by day, but volunteered for the local SWAT team. Less than 200 rounds fired.

$1,500 FFL to FFL. Open to multiple payment methods, but funds need to be in-hand prior to shipping.

Group photo is 10 rounds of factory Berger 185 jugs. Orange sticky is 1.5”.

Text for quickest response - 406-529-9514