Brand new MDT Bipod, bought this for a photoshoot that ended up not happening.

Bipod is brand new. BTC head, can mount to Pic or ARCA.

$520 Shipped

For those here that are well versed with the smoking of meat- I've got a Weber SMC coming this week and it'll be my first experience into giving this type of cooking a try myself (although I am a longtime fan of the end result). So as mentioned- I've got a SMC coming, approximately 70lbs of Kingsford Blue Briquettes, as well as Hickory/Cherry/Mesquite/Pecan/Apple Wood chunks.

I've been reading through various online articles and watching YouTube videos over the past week and it sounds like either pork butt or chicken thighs is the most forgiving for starting out and I'm leaning towards starting with the thighs myself. I think I'm good with the importance of maintaining temperature and how to do it (I also have a Termopro temperature gauge in the order with two probes, one of which I believe is best served to use one to monitor the ambient temperature at the rack with the 2nd being used to monitor meat temperature), understand the trimming of various cuts of meats, dry rubs, and marinating/basting timing. If I start with the thighs, I'm thinking of using either the Pecan, Cherry or Applewood for the first time (I prefer the heavy smoke flavor that hickory or Mesquite will impart but I'll likely have a crowd to evaluate how things turn out so understand the alternatives to be a bit milder/safer for a group.

I'm still trying to figure out the whole wet/dry brining element though as well as to understand the variations in smoking temperature. I've also seen some recipes where they put the chicken thighs in a pan rather than directly on the grill/arguments on whether or not to use the water pan (seems to focus more towards it being more favorable for the lower temperatures as far as I can tell but chicken seems to want to be smoked hotter than say the pork butt ... So many variables and I'm still trying to figure it all out.

All that said- for the Pit Masters here, any tips/tricks for someone starting out on their smoking journey that you'd be willing to share?

-LD

Brand new/never assembled/never used.


MDT Elite
Black
Remington 700
Short Action
Right Hand

$1200 shipped


Can accept all the usual electronic payments or check/MO if you must. If you would like more photos, let me know.

Hardly used just doesn't work with my action very well
It's a solus so you know, I don't have original follower either


$90 shipped conus

Mark 5 with tmr reticle
With arc rings

Always wrapped ,in great condition , honestly not that many rounds on it, used on my 6.5 hunting gu n
$1400 shipped conus

No trades






[



ATTACH=full]8714572[/ATTACH]

Brand new in sealed bag. Ships from my dealer. Save yourself tax shipping and a few bucks. $3000 $2900 if you are in md and I don’t need to ship

Just like the title states. Brand new and never opened Sig Zulu 6 - 12x42 image stabilizing binos


$850 shipped


Zelle or cash app only, no trades

This has not been posted yet has it?

All factory ammo fired once. Discreet PayPal Friends and Family or Venmo gift.

LRP from factory Norma Golden Target 6mm Creedmoor 107gr (pictured center and right column)

$120 shipped per 300 pieces (3x available)
Take all 900 Norma brass for $300 shipped.

$old for the bag of 264 pieces

LRP from factory Hornady 6mm Creedmoor 108 gr ELD Match (pictured left column)

$120 shipped per 300 pieces (3x available)
Take all 900 Hornady pieces for $300 shipped

Size 36 Pro Pant in Gunmetal $160
Size 36 Axis Hybrid Pant in Ash $220– SOLD
Size 36 Sierra Pant in Gunmetal $100– SOLD
2 XL Waffle Knit Long Sleeve Shirts $60 for both
New Yukon Gaiters XL $80
Tiburon Pant 36 Reg $120
Ultra Tiburon Hybrid Zip T Large $100
Guide DCS Vest XL $130
Guide DCS Jacket XL $200
Attack Pant 36 Reg $100 (has some tree sap on the butt) see photo
Gaila LS Hoodie $ 50
Ultra Merino 125 SS Crew T Large $50
Base Camp Vest XL $60


Most of this is New and has only been washed once. The attack plants have tree sap on the ass. Prices are shipped.

Had LRI build this a few years back. Mounted a Zeiss 6-36 on it, did some load development on it, then never shot it again. The barrel's a stainless cut rifled K&P in the standard Remington 700 Varmint contour, and the actions a stainless 700 SA. They blueprinted the action, timed the bolt handle, installed dual ejectors, M16 style extractor, and enlarged the scope base holes to 8-40. The trigger's a single stage Triggertech special set at around 1lbs. It has a steel 20moa base on it along with an Erik Cortina precision bolt shroud. Had the local cerakoter coat the entire gun. I then bought a custom HS Precision stock, and had a reputable smith glass bed it.
While working up a load, I used Alpha brass, federal srp's, Varget and Berger's 140 grain hybrids, it would never shoot over .75" no matter what charge weight went in. The load it liked was 37.3 grains. When I found that, I then moved on to the other guns in my fleet and kind of never came back to it. It has around 250 rnds through the pipe. To shoot this I took it off the wall, put in a hard case, took it to the bench, back in the hard case, and back on the wall and that's how it lived.
Now the possible 'con'; I feel personally, the gun feeds better with the blind magazine box seated tight in the receiver rather than just hangin out, which it does. The smith that bedded it told me this is how they were made, with some play in them. Your mileage may vary. And lastly, when the receiver was being faced to true it up, they took a little more off the receiver than normal, which makes the recoil lug sit about 7 thou further back in the stock than factory, so if you want to switch stocks on this rifle, you'll have to shave a tad off of the rear wall of the receiver pocket to make it fit. Shouldn't be a big deal for someone that screws with guns a lot.

I have 3000 dollars in this rifle. Asking 1900 shipped or, trade for a Kahles or S&B 6-36 scope (with a good reticle for me). (rifle & base only, the scope and rings arent for sale)

FOR SALE

AI AT-X GEN 1
FACTORY 6.5CM Barrel (500RDS)
6BRA Barrel (400RDS)
Whidden FL dies with bushing kit CC modified case
200 fire formed 6BRA Lapua cases (2 firings)
2 HRDG 6BR Mag Kits

This is a great setup, both barrels shoot very well. $5000 PPFF or you cover G&S. Shipped to FFL. Optic Setup and muzzle devices not included.

Leupold VX-3i 6.5-20x50 CDS 30mm tube with Varmint Reticle. Comes with original box, paperwork, and unused sun shade. Glass is in good shape. Few handling marks and light ring marks on scope body.
$650 shipped

S&W 686-4 2.5” barrel 7 shot performance center quad port laminate grip gun. These were a very limited run factory performance center revolver. Comes with some of the paperwork, wax paper, original box and original laminate grips. Also comes with a factory letter. For some reason it won’t let me attach the picture of the letter so just message me and I’ll send you the pic. Has some handling marks as shown in pictures. Has been fired.
$1,700 shipped to your FFL INCONUS

Leupold VXII 6-18x40 with target dot reticle. 1 inch tube. Comes with Leupold box but not the original one. Glass is good. Few handling marks on the scope tube and light ring marks. Set of butler creek caps included.
$450 shipped

Looking for a set of internal weights for an Acc Elite. Show me what you got.

I have 3 of these that have accumulated in my gun room and I don’t think I’ll use any of them in the next 18months.

1. .224 5R 1:7” twist 29” $650 shipped insured
2. *SOLD* .243 5R 1:7.5” twist 31” $685 shipped insured
3. .308 5R-LH 1:8” 31” $685 shipped insured

Brand new in the Proof packaging. 18” in length, carbon fiber, Sendero contour, and the muzzle is already threaded from Proof. 1:7” twist. It’s a drop-in and ready to go prefit. I have 2 and never ordered the Ti3s I had in mind. $635 shipped insured. Thank you.

After using my 11.5 for 5 years now with just a T2, I’m looking to add some quality of life at the range and add a 3x magnifier on a QD mount. What’s the consensus on the best 3x magnifier under $400-500? I’m probably ok with spending 3X-C or maybe 3X-P money, but hard for me to justify beyond that unless it’s mind blowing somehow.

I was kinda set on the 3X-C, but just saw the C_DOES review showing the relatively small FOV compared to a Primary Arms so it’s got me rethinking. The Vortex Micro caught my eye at one point because I don’t mind Vortex stuff and it comes with a mount and have seen it all in for $200, but I don’t mind spending more for quality. I run my stocks all the way out and understand these will have poor eye relief so good eye relief would be a bonus.

I’d floated getting a $calarworks to mount the Aimpoint so if there’s a $500-ish package with a mount that makes more sense, let me know.

Any of you homo’s have a SE MI single girl you know who’s looking for a boyfriend to potentially grow into a husband? Jesus Christ I’m turning 30 Friday and still single. Where are the good Christian girls who love spending copious amounts of money on guns, are rock solid conservatives, and have good morales/values?

Vortex Strike Eagle 5-25x56 EBR-7c reticle Brand New in the box $550 shipped

Brand new in box Bushnell Match Pro scope 5-30x56 MRAD $600 shipped

Nothing I would elude to as winning,.... To-date,... has effected me or made me cheer. When does it start or am I not available for that campaign promise, do to being a God gearing, gun loving, straight white guy?

I'd like to be tired of winning, but when does it start?

Has anyone here shot out a 20 practical, 20 tactical or 204 barrel? How many rounds and what kind of firing schedule and load was used.