I have two one set of MDT Baker wings that I'm not using.

$175 per set Shipped PayPal FF or you pay the fees for G&S
No Trades

PM if interested

I have a pair of Swarovski 15x56 SLC binoculars for sale. I sent them in recently to get the tripod mount fixed as it got cross threaded. They gave them a complete once over while they had them in the shop. They are in like new condition. I have attached a pic outlining the refresh preformed by their service department.

$1700 Shipped (Buyer Pays Insurance if needed)
PayPal FF or you pay the fees for G&S
Not interested in trades

PM if interested

LH 6MM Creedmoor built by RBros. Rifles (Rifle Only)

103 rounds on the barrel. T2A is bedded for the Defiance Deviant.

Rbros Rogue SA (Defiance Deviant) $2200 New
T2A Manners stock with arca rail $725 New
Hawkins M5 DBM $226 New
Full Length Arca Rail $100
Proof Carbon Fiber Barrel 1:7 $929 New
Trigger Teach Primary trigger $165 New



$3200 Shipped from me to your FFL (buyer pays insurance if requested)

PayPal FF or you pay the fees for G&S

**No Trades**

I picked this up a few months ago and can't say I'll use it. I can finish anywhere from 21.25" to 22.9" and is a left handed gain-twist of 9.5-8.75". 1.2" shank someone began to lightly thread, but that will disappear as it's shallow and won't affect the final threads. $520 shipped fully insured. Thank you

Good afternoon gents! I ordered the Zero press, and I was wondering what does the press come with, and what will i need extra to start reloading on this press. I've had a Dillon xl650, and I'm not new to reloading, but I've been trying to find what else from the company i would need to get this press up and running. I bought dies and all the basic components, but I'm new to this press, and I'm not sure what else to order. Dillon has drop downs when ordering, plus suggestions, while this press acts like its hiding a secret, lol. I tried contacting the company but got no response. So, if anyone has this press, feel free to chime in it will be much appreciated.

I have a like new RRS TVC- 22iC MK2 tripod for sale. I thought I was going to be shooting a bunch of NRL Hunter but the schedule just doesn't fit. Literally used once out at the range.
Comes with original box

$850 (SOLD)shipped PayPal FF or you pay the fees for G&S.
Not interested in any trades.
PM if Interested. I'll take it in the thread wins.

I have a 6 ARC complete upper receiver. Upper is unfired and all parts are new except the Geissele charging handle and Battle Arms Carrier. The 6ARC bolt came from Craddock and is unfired. The charging handle and Battle Arms carrier have around 100 rounds on them from a different firearm that they were previously in. I own 4 Craddock RTR barrels and everyone of them shoot amazingly accurate.
$975 Shipped
No Trades Please

• Aero Precision FDE upper receiver (New)
• Battle Arms Development Enhanced Bolt Carrier (Lightly used)
• Craddock Precision RTR 18" 6ARC barrel with head spaced bolt (New) - Barrel has been painted FDE - 1/7 Twist / Rifle gas length
• Superlative Arms Tan DLC .750 adjustable gas block (New)
• Geissele Airborne charging handle (Lightly used)
• Geissele MK18 DDC M-Lok / Arca-Swiss rail (New)

MR920 Elite (includes 2x 15-round mags, rose gold threaded barrel, suppressor sights, comp, factory soft case & accessories, etc.)
- Holosun HE508T-GR (green reticles)
- Streamlight TLR7A
- T1C Axis Elite w/ sidecar
- T.REX Ragnarok w/ Safariland UBL mid-ride
$1300 buys it!

Found these in the random parts bin I am trying to organize. I think these are extensions for an atlas bipod, but honestly don't remember. I don't have one to test fit with anymore. Comes with hawk hill feet. ~6 - 6.5" extensions it seems.

SOLD $85 shipped.

In good condition 1.45 height $90 shipped

Have (4) new in box Triggertech Diamond 2 stage. No bolt release, RH, rem 700 clone, Pro curved. Sold

Hi All,
I've had this watch for a while and used to wear it on deployments but I just don't really wear it anymore as I have another I wear daily.
I just got the watch back from a full service at Breitling about a month ago and haven't worn it since so it will show as new as possible.
Trades?? Let me know what ya got. Maybe looking for a nice NV clip-on. No junk and no Glocks or AR variants
Thanks for looking.

What is the advantage of Sm rifle primer Lapua brass vs Lg rifle primer Lapua brass? Thks

*Sold*

$3,299.00, shipped in USA. No international shipping.

For sale is an almost new Schmidt Bender 6-36 PM II High Performance 1cm ccw DT II+ MTC LT / ST II ZC CT Riflescope 163-911-42F-M2-I5. "Almost" new since it was very loosely placed in rings, then in the safe. The only imperfection I can see is a tiny scuff on the top turret, which is circled in one of the below pics.

Includes the original box, documentation and an Aadland Engineering throw lever.

Please PM with any questions, and I'm happy to get on a call with you. I'm flexible on payment, but prefer a certified check or money order.

Thanks for looking!

/Steve

...and why. Let's say in 300 PRC, for shits and giggles.

Back in 2015 while taking the Harrison Honor Guard for a boat ride I broached the idea that when my dad passed if it would be possible to fire an M1 Garand I owned during his 21 gun salute.
I was told it was not allowed due to insurance & liability issues and I figured that was that. Some time latter I had a very good friend of my dad tell me that no matter what the policy was he would make it happen. Well 13 months latter my Dad passed and I brought the rifle with me to his funeral. Dads friend on the Honor Guard told me they would disable the gas system on the rifle and racked the bolt for all 3 rounds, leaving the last round in it.
After the service the rifle returned home to the gun safe, last discharged round still in the chamber, where it would stay in perpetuity. I then began to look for a way to display the rifle in my man cave as a tribute to him along with other mementoes of his time in the service.
Well after 8 1/2 years I finally found a display case that would do justice to the rifle & to my Dad. I ordered it from M1 Garand Transit Crates II and Paul A Lukas set about to make it happen.
I received it today and can honestly say I am beyond pleased and it is finally in its place of Honor in my man cave.
Hears to you Pops, gone but not forgotten.

Dad 12/43


Dad 6-6-2014 D-Day Museum New Orleans

2015 Harrison Honor Guard Boat ride




Harrison Honor Guard Memorial Day 2016


Dads Funeral, 2016









Display for "Dads" M1

I recently picked up a Remington 700 off Gunbroker that was built by Gruning Precision. I don't know a lot about Gruning except that they generally build rifles for police and other law enforcement agencies. I emailed Gruning and discovered this rifle was given an accuracy package which included truing the receiver and bolt, a Timney trigger, and the HS stocks were skim bedded with barrel channel clearance. The barrel blank is either Krieger or Hart, not sure which or how to tell. After taking the rifle to the range and realizing it was still capable of shooting one-hole groups, I decided to give it a bit of a makeover.

I sent the stock back to HS Precision and got it repainted which turned out great and the turnaround was super fast. I also sent the barreled action off to LRI for a few upgrades and cerakote. I had the bolt fluted, barrel threaded, muzzle brake installed and a new bolt handle installed. My only complaint with LRI is they cerakoted the recoil lug on the rifle which made it impossible to mate the stock back to the rifle. I ended up sanding as much cerakote off as I could get and it went back together more easily, but still very tight.

Overall I'm quite happy with my Gunbroker purchase, its performance, and its appearance. The main thing now is to get some more rounds down the pipe and stretch its legs out to 1000.

After Upgrades:






Before Upgrades:

Selling an auto trickler v3 with billet area 419 base and factory base, auto trickler v3 bluetooth electronics for a&d fx scales, and autotrickler powder cup. This is just the trickler, not the bull throw, also, it doesnt come with motor which can be purchased from auto trickler or ingenuity for $20.

Looking for $220 shipped for everything. Payment via paypal f&f

Sold

Sold

So seeing how much fun discussion we are having in the other thread, I thought we could add to it.
Which brand of oil is always a hot bed of discussion

Personally I use Valvoline 20W50 Super Blue Diesel Oil after running it thru a Fram filter in my CUMMINS for 20k miles. Blackstone oil tests every 5k to verify oil quality.
I have found the higher zinc content along with the carbon build up from the used oil allows the rings to seat far superior to the rail. Sample size of two scope mountings.
A damp cue tip to coat the inside of the rings surface which contacts the rail. Then torque the fastener dipped in the same oil to manufacturers opinion.

Used at the range once. Works like a charm just wont have the range to utilize this soon. Like new with everything included
$6000
$5900
$5800 delivered

Area 419 High diving board and bubble level.

Only want to trade the diving board for a low one.

Bubble level I’ll sell for $35 shipped. Comes with bolts.

I don't shoot NRL22 matches, so need some advice for a friend who is building a rifle for his son. He has a Vudoo barreled action, Triggertech Diamond trigger, believe it is mounted in an American Rifle Company Xylo chassis, -- so a nice rig. Plan is for the boy, now 14, to grow into it, and start by getting involved in NRL22 matches.

So which scope to mount? Price not particularly a concern, but relevance to NRL22 stages for sure is. I am guessing that targets from 25 yards out to 250 yards is the sweet spot, but would appreciate any recommendations you all may have that take advantage of your direct experience in these match formats.

Thanks in advance.

Hello,

I have a BCM AR with a Rainier 18” barrel. I was loading 24.0g of N540 with 75g Hornady BTHP at 1.847 CBTOG with CCI primers, and it was great. Due to some unrelated light primer strike issues I switched out the bolt and BCG, and all of a sudden I’m getting signs of over pressure on the primers. Can switching the BCG cause that? It’s also getting warmer in PA, but I think N540 is supposed to pretty temp stable. Any thoughts would be appreciated! Thanks.

Looking to move on from TBAC 338 Ultra SR. Long story short, I had access to a 1500+ yd range, got myself setup with a 300NM, during the waiting period for this can, lost access so sold the rifle and the can has basically sat since.

This is the Gen1 version. It has 20 rounds of 300NM, 10 7SAUM and 30 308 through it for a total of 60 rounds.

Includes 2 SR 338 Cal brakes - one threaded 5/8-24 and the other 3/4-24. Also includes a cover from Precision Underground and the original packaging.

I will have to transfer this to an SOT via Form4 and given the potential timeline and tedious nature of the transfer process, only looking to deal with established members who have strong feedback - sorry for any inconvenience. Wait times heavily dependent on buyers SOT and their policy regarding individual transfers.

Asking $1200. I will cover my transfer costs/stamp and shipping.