Login to view embedded media

No not really , police shot him 9 times while he was on the other side of a fence.
He wouldn’t answer their questions- because he’s none verbal.

And the police are upset because the video only shows one angle of them shooting a severely handicapped teen from the other side of a fence.

Now before anyone gets a wet pussy about the kid having g a knife - well he was in his own yard , being held by family members, on the other side of a fence. But they had no other option - it was obvious he was about to hurtle the fence and go all ninja.

They usually just like to beat and taze the mentally handicapped- but must have been short on time today cause within 12 seconds they shot at him dozens of times and hit him with 9 rounds .
Just how low are the current hiring standards?

It’s only been a year or so since some other hero’s shot the old lady with dementia- through her windows because some yelled hammer .

Anyone had ignition issues with this lot of CCI 450’s? I had 3 rounds not go off during a match a few weeks back. Two of the three rounds went off on the second attempt. They are seated .005” deep in Alpha Brass. Never had an issue with this rifle until this new lot of primers. I’m going to try my spare bolt next time I go out to the range.

Manners MCS-CS Micro Chassis Back in Black. 2 sling qd cups, area 419 arca rail, and cheek riser. Planned on having this on my 22 creed but the bolt release on my action interferes. $1250 shipped.

Anyone have experience with upping the screen size of walnut tumbling media to keep it from clogging flash holes-primer cups? I believe Lyman walnut is 12/20. What about going to 8/12 media?

For various reasons, I’ve been decapping before tumbling lately and it helps the other parts of the process but dealing with media in the primer holes sucks.

I’m not going to a wet process so don’t suggest it. Somehow it rubs me the wrong way to use a food product for this so I’d rather not use rice.

Hi Folks. I am seeking advice on custom barrel specifications for 1000 yard shooting and one kind of bullet. I would appreciate any suggestions to the specifications I have come up with so far.

Primary bullets used - Berger long range hybrid target 153.5 grain - 1000 yard shooting
______________
Brand - Bartlien
Contour - straight taper, heavier weight ( seeking guidance on specifics)
Twist - 7 per inch
Length - 26 inches or 28
Material - stainless
Groove - 5R
Options - 1/4 radius spiral flute
- hand lapping

Only 3 months old. Glass is mint and scope has minor scratch from being run in a couple of matches. I have kept the lenses covers on, its a FFP Mil-XT. Asking $1850 shipped.

Have the following laying around/not being used. All prices are OBO and include shipping:

TBAC Bipod + ADM Picatinny QD
$SOLD

Kestrel 5700 Hornady (w/ T1C kestrel pouch)
$SOLD

Fish Hunt Fight Chest Rig Gen1
$60

Well after over a year wait I received a couple.

In stock, only a few in hand.

NSN Marked! Brand new in the box and hard to find at times Mb762ssal/re muzzlebrake . For the United states Marine Corp M40 A5 and M40 A6 clone sniper rifle.

$388 shipped

Please click here to view and purchase.

**

**

Griffin armament MGL-110 in FDE. Perfect for your M110 clone. Be sure it’s legal to own in your area/state before buying.

Have 2 1 on hand.

$2150

Please click here to view and purchase.

**

**

Hey guys, I have a gen1 Ruger American in the Pacific Northwest. It's a hard use hunting gun and it's pretty much always wet. These things have terrible rust protection. I'm super diligent about wiping it down and blowing it off with compressed air and all that stuff, but no matter what it still rusts a little bit.

Was sitting there thinking about how this cheap rifle really isn't worth getting cerakoted or anything like that when I glanced over at my daughter's camo shotgun. And then I remembered the gun wraps.

Do any of you have experience with them? I'm sure I could install them well. I'm good at that kind of stuff. But I can't really decide if this would be a genius plan or if it is super cheesy. I also wonder how they feel in your hand, especially since it's wet around here all the time. Anyway, the price is right so I'm thinking about it. If I don't do this I probably won't do anything so that's the other option. I've even considered getting out a can of spray paint.

What do you guys think about this?

These murderous, horrific black on white attacks are becoming a near daily occurance.

If it were the opposite, the Left and it media would be howling.

Whites are going to have to take on the mindset of the Israelis when they are out in public; always be armed and never turn your back on these savages.


How long before the Leftist trash buy this animal an Escalade?

For sale:

An ARC chambered barrel for ARC actions. 25 in long, 7 twist, contour is similar to med palma/marksman. Threaded 5/8x24. Has close to 300rds on it. It is a shouldered barrel.

$300 shipped

DM for questions, offers, etc.
I will NOT DM you first
Flexible on payment

Link is for 6.5cm but details are the same

For my Roaring Twenties collection, 1911-A1 Fitz special. Bobbed hammer, bobbed trigger guard, Dovetail safety, genuine Stag grips with inlaid engraved Texas star, stainless Cerakote on frame. Tisas engraved 1911-A1.

Looking at purchasing either one of these and not really sure which. Primary focus is glass quality, field of view, and to be used in conjunction with a rangefinder at 12oclock.

Selling an Eberlestock Bandit pack. Good condition. No issues. Was used for a short time but needed something bigger.

$100 shipped. PayPal FF preferred.

Gunwerks is announcing its Elevate Bipod Today !




Bipods have turned a corner and this new Elevate bipod is a pretty elegant solution. I will have some words on it shortly as I just returned from Alaska. https://www.gunwerks.com/

Some neat features with this bipod and the tripod style leg system is pretty smart too. The mounting is limited right now to a picatinny rail as I don't see an upgrade or change path for it. But the 90 degree bit / turn system is cool for sure, fast too.

This is a perfectly working scope in very good shape. Will come wit the ARC M Brace mount and MKM Caps

SOLD!!

Good morning, Members!

Below is the updated list of OPTICS, SUNSHADES, LASERS, MAGNIFIERS, FLASHLIGHTS, MOUNTS and RING SETS as of today 04/21/2025. There are some new items here... S&B, SPUHR, Leuplold, ACOG, Surefire, Steiner, Streamlight, Larue etc.

Because I've added more than 100 or so items to what I have for sale, I've split what's available into two lists... an OPTICS list an ACCESSORIES list that I'll post shortly after this. So see both lists for a number of new items that weren't on the previous lists.

There are still a lot of quality items both lists. And remember shipping is free.

***Members please be aware of scammers. I will only arrange payment through PM on this site and only under my profile Rpatton73. Any other profile using my photo is a scammer.***

OPTICS

1. US OPTICS SN-8 1-8x27mm Digital Red with 2/10 MIL Zeroing Windage & Elevation Knobs with FFP C2 Reticle w/ Flip Lens Covers $800

3. US OPTICS SN-8 1-8x27mm Digital Red with 2/10 MIL Zeroing Windage & Elevation Knobs with FFP C2 Reticle w/ Bikini Lens Cover $800

4. US OPTICS SN-8 1-8x27mm Digital Red with 2/10 MIL Zeroing Windage & Elevation Knobs with FFP C2 Reticle w/ Lens Covers $800

5. US Optics BBL-100 Rail Mounted Fixed Bubble Level, $50

6. US OPTICS FDN 17X 3.2-17x50mm HD EREK Knob FFP MDMOA 34MM Illuminated Reticle Parallax Adjustment w/ Honeycomb Sunshade and Bikini Lens Cover $1400

7. Leupold Mark 6 1-6x20MM 34MM Tubę M6C1 CMR-W Illuminated Reticle, $1200

8. Leupold Mark 6 3-18x44MM 34MM Tube M5B2 FFB Tremor2 Reticle, $1700

9. Schmidt Bender 12-50x56mm PMII FFP .25 MOA P4F-MOA Reticle w/ ARD Sunshade, $2500

10. Trijicon ACOG 5.5x50 BAC .308/7.62 BDC Red Chevron w/ ARD Sunshade and Trijicon RM01 Red Dot Sight, $1500

11. Badger Ordnance Angle Cosine Indicator Kit with Generation 2 Picatinny Mount Aluminum Matte Black, $175

19. Leupold Mark 4 CQ/T 1-3x14mm Circle Dot Reticle 3MOA @ 3x, 9MOA @ 1x w/ Plastic Flip Lens Covers $550

36. Bushnell Elite Tactical ERS 3.5-21x50mm, FFP G2 Reticle w/ Bikinin Lens Cover $1100

38. Burris Xtreme Tactical XTR II 1.5-8x28mm, FFP Illuminated Ballistic 5.56 Gen3 Reticle w/ Plastic Burris Flip Lens Covers $500

43. Aimpoint Hunter Red Dot H30L 2MOA in box w/ Flip Lens Covers $400

45. Aimpoint Hunter Red Dot H30L 2MOA w/ Bikini Lens Covers $350

46. Aimpoint Hunter Red Dot H30S 2MOA $350

47. SwitchView Lever 1692SV2R3V1, NXS/VTX Viper/Leupold MK6/MK8-CQBss,RIFLE NEW IN BOX, $40

48. SwitchView Lever 1692SV2R3V1, NXS/VTX Viper/Leupold MK6/MK8-CQBss, NEW IN BOX, $40

58. Nikon M-223 2.5-10x40mm Laser IRT Precision AR Optic, BDC 600 Reticle, New in box w/ Nikon Lens Covers $300


SUNSHADES

1. Vortex Viper 44MM 4”, $20

2. Vortex Viper 50MM 4”, $20

3. Carl Zeiss 44MM 2.5”, $20

4. Carl Zeiss 56MM 2.5”, $20

5. US Optics SUN-5825 58mm T-PAL 2” Sunshade w/ ARD, NEW, $40

6. US Optics SUN-5825 58mm T-PAL 2” Sunshade w/ ARD, NEW, $40

7. Nightforce V171 Sunshade NXS 3” 50mm, NEW, $25

8. Leupold 50mm Carbon Fiber Alumina Tactical ARD #0114, $150


LASERS, MAGNIFIERS and FLASHLIGHTS

1. Surefire M93 Weapon Light Mount QD Lever Mount, $50

2. Surefire KE2-A Weapon Light w/ Surefire Mount w/ Tape Switch, $250

3. EOTECH 3x Magnifier w/ Larue QD LT755S Mount $400

4. Steiner Laser Devices 7” Cable Remote Pressure Pad Tape Switch, NEW, $75

5. Steiner Laser Devices 7” Cable Remote Pressure Pad Tape Switch, NEW, $75

6. Surefire SR09-D-IT Remote Dual Switch for Weapon Light + ATPIAL Laser Device, $85

8. Viridian X5LRS w/ Tape Switch for AR Platform, $125

9. Steiner DBAL-I2, Tactical Green Aiming Laser, Picatinny Mount, w/ Tape Switch, $750

10. Surefire ST07 Weapon Light Tape Switch, $40

11. Surefire ST07 Weapon Light Tape Switch, $40

12. Weapon Light Tape Switch, $30

18. Steiner OTAL-C IR Offset Tactical Aiming Laser, Picatinny Mount, w/ Tape Switch, $400

19. Pulsar-940 IR Flashlight, $60

20. Streamlight TLR-2 HL G, rail mount flashlight w/ green laser, $275


MOUNTS

1. SPUHR SP-4024 0MIL/0MOA 34MM, 1.89”, Cantilever Mount, $350

3. Larue Tactical LT104 SPR-1.5 34MM Cantilever Mount, $165

5. KZ USA Aimpoint Micro QD Low Mount, $25

12. Larue Tactical Aimpoint Micro T1/T2/Comp M5/M5S QD Mount Mount LT751, $60

16. Larue Tactical Aimpoint Micro T1/T2/Comp M5/M5S QD Mount Mount LT751, $60

21. Nightforce A194 UltraLite XTRM Extended Unimount 1.44” 20 MOA 34mm, $170

24. Wilson Combat QD AR Cantilever Mount 1.70” HGT 1.0” Tube, $60

25. Wilson Combat QD AR Cantilever Mount 1.70” HGT 1.0” Tube, $60

26. Wilson Combat QD AR Cantilever Mount 1.70” HGT 1.0” Tube, $60

27. Nightforce Ultralight One-Piece Rem 700LA, 1.125” 30MM, $125

30. A.R.M.S #12 CQ/T Leupold CQ/T Mount, $60

34. Burris AR-PEPR Cantilever Mount 1.50” 1”, $40

35. Warne Tactical Cantilever Mount w/ Dual 45 Degree Mounting Rails 1.38” 30MM, $80

37. BOBRO Aimpoint Micro T1/T2/Comp M5/M5S QD Mount, $60

38. Larue Tactical LT755 Short QD Pivot Mount for 30MM Magnifiers, $130

42. Nikon M-308 Mount, Built-In 20MOA, 1.40” HGT, 1” Tube, $40

43. Nikon M-308 Mount, Built-In 20MOA, 1.40” HGT, 1” Tube, $40

44. Nikon M-308 Mount, Built-In 20MOA, 1.40” HGT, 1” Tube, $40

45. DNZ Freedom 6-Bolt Reaper Beast Picatinny Rail 311PTBR, 1.380” HGT, 30MM, $125

46. DNZ Game Reaper Remington LA Mount, 1” HGT, 30MM, $100


RINGS

1. A.R.M.S. #22-34MM Rings, 1.450” 34MM, NSN 1005-01-574-2206, $90

2. A.R.M.S. #22-34MM Rings, 1.450” 34MM, NSN 1005-01-574-2206, $90

3. Weaver Grand Slam Top Mount Rings, 1” Hgt, 1” Tube, Solid Steel, Silver, NEW IN BOX, $20

4. Seekins Precision, Med .87” 30MM, 6 Cap Screw Rings, NEW IN BOX, $100

5. U.S.Optics Rail Mounted Swivel Bubble Level BBL-300, $50

16. Barrett Zero Gap Medium Rigid Rings 13322, 1.1” 30MM, BLK, $125

17. Barrett Zero Gap Medium Rigid Rings 13322, 1.1” 30MM, BLK, $125

18. Barrett Zero Gap Low Rigid Rings 13321, 1” 30MM, BLK, $125

19. Barrett Zero Gap Low Rigid Rings 13321, 1” 30MM, BLK, $125

20. Talley Tactical 6 Screw Scope Rings, 1.275” 34MM, TAN, $70

21. US Optics High Rings P6M-3500-H, 1.38” 35MM, $125

22. US Optics ExHigh Rings P6M-3000-XH, 1.35” 30MM, $125

23. US Optics High Rings P6M-3000-H, 1.25” 30MM, $125

27. Precision Reflex Rings 01-034-01, 1.26” 34MM, $60

37. Zeiss Victory 4 Bolt Permanent Rings, 1.00 1”, NEW IN BOX, $90

38. Zeiss Victory 4 Bolt Permanent Rings, 1.00 1”, $80

39. Talley Tactical Rings, 1.275” 30MM, TAN, $80

40. Talley Lightweight 2-Piece Scope Mounts w/ Integral Rings, Remington 700, 34MM Medium, $20

46. Trijicon RMR Footprint Mount for 30MM Scope Tube, $60

47. Trijicon RMR Footprint Mount for 30MM Scope Tube, $60

49. Kimber Steel Picatinny Scope Rings, 1” 30MM, $40

50. Vortex Bubble Level, 35MM Tube, $20

Hawkins Tank 6mm muzzle brake. Threaded 5/8-24. Could use a cleaning but overall good condition. $120 shipped to lower 48.

My other listings:

500 115gr DTAC Blems

Bix'N Andy TacSport Single Stage Trigger with Flat Shoe

Manners TCS Rem 700 SA RH

Minox MD 80 ZR with Reticle

Very clean Trijicon Tenmile 3-18X44 FFP Mil. Comes with box and papers. Includes flip caps. $1100 shipped.

Heavily used NSW AOR1 London Bridge 6094B plate carrier. Large/X-Large

I traded some dude that was way cooler than me some stuff for this in a far away land one time. Pretty cool, got sim round impacts all over it. Airsofters love it.

$275 shipped

$900 shipped, no box. Rings not included.

I'll keep this a little short and maybe add to it later since family and kids take up 99.99% of my time

Edit: big update at this post: https://www.snipershide.com/shootin...vs-without-warning-chad.7229804/post-11745665

Edit 2: follow up after 3 days of shooting. https://www.snipershide.com/shootin...vs-without-warning-chad.7229804/post-11747490

For background, I've owned by Maverick from nearly the point it was released. I've used it enough through several PRS seasons that I'm quite familiar with it. I've sent it back to Area419 for several cleanings and a separated baffle stack (that occured during a 2 day match). They have always taken care of it, no issues. It is an EXCELLENT performing suppressor for its intended use. I run it in the shortest configuration. It has certainly helped with the longevity of my shooting sessions when doing PRS specific repetitions.

I recently picked up the Magnus RR-K and Without Warning CHAD (to shoot in suppressor unfriendly states and countries).

After putting a few rounds through all 3, I'll share my initial thoughts:

The Magnus RR-K certainly has a more suppressor feel vs the Maverick. The Maverick, to me, feels more like a brake with the signature 'snap' when you shoot it. It rarely leaves the target by much and remains easy to drive. I've always appreciated that I don't have a headache after 2 days of constant shooting or with heavy training regiments. When comparing the two suppressors, you can notice the opening of the last aperture on the Magnus RR-K is the same as the bore diameter and the Maverick is a little larger. This was at quick glance. So, I think this may slightly drive how they perform differently.

The Magnus RR-K has a slight push with a small off-target drive. Now, this could simply be something that I need to train better for or that I simply haven't shot the suppressor enough to anticipate and understand the feel of it. It is something I will be working on. It is not loud when compared to the Maverick (outside the shooter's perspective). In that sense, it is definitely quieter IMHO. From the shooter's perspective, I liked the overall sound and tone of the Magnus RR-K vs the Maverick.

The CHAD is quite a brake. I've used the Sidewinder, Hellfire Match, APA, and ACE in the past. I have mostly removed myself from shooting brakes simply due to the fact that I get really bad headaches after long sessions of shooting. And quite honestly, it's one of the main reasons I've stopped shooting Open guns in USPSA. (Decades in the Army finally caught up). So the reason for this purchase was to simply use the CHAD when I travel to locations that don't allow me to use suppressors. The problems that I've had with other brakes is the concussion felt at the shooter. Previous brakes were HORRIBLE. The CHAD does not have that same concussion effect that I've experienced in the past. However, the sound signature from outside the shooter is certainly there. When shooting the CHAD, I noticed what can be described best as a gust of wind flying "around me" vs "at me." The CHAD performs as intended and advertised, and likely the best brake I've ever shot. It literally does not move off target. After shooting targets at 525 and 585 yards with build and break drills on a wobbly ladder and single bag, the performance of the CHAD is quite apparent and a positive one. The price tag, however, is hard to swallow. So, I get it...

So what will I use going forward?

At this point I will likely be trying my next 2 day match with the Magnus RR-K, with the Maverick sitting on my backup rifle that I usually bring. I was happy with the Magnus RR-K and it's initial performance. The CHAD will be put away and likely only be used when I'm forced to shoot a brake. It is a stellar performing brake, but brakes still remain a contentious issue for my brain, ears, and sinuses.

Hope this helps people. My 2 cents...

Grey birch
Cz 457 chassis
Bag rider
Ergo grip
Nice condition
Folder
16” fore end
Sold
PayPal friends

Here is our 2025 Course schedule for Accuracy Dynamics in Iowa.
https://www.accuracydynamics.us/



HOW TO SHOOT 1000 YARDS
Classroom Instruction
This course is a full day of classroom information for shooters who want to dive deep into long range rifle shooting. Gear, Fundamentals, External Ballistics, Ballistic Calculators and Wind Methods are covered in depth to start shooters in the right direction. This course is the foundation of information that covers each topic in depth that on-range shooting courses don't have time to cover.

If you want to better understand long range shooting this class will teach you the modern ways of shooting, gathering data, truing your ballistic calculator and how to make wind calls.

Morning Session
Long Range Shooting Gear
Fundamentals of Marksmanship

Afternoon Session
External Ballistics
Wind Calling Methods

8AM to 5PM
1 hour lunch break

LONG RANGE SHOOTING FUNDAMENTALS
1 Day Course - On the Range
The Fundamentals of Marksmanship are the foundation to shooting your rifle with consistent and repeatable precision at long range. This course will teach you how to properly setup your rifle, address your rifle and operate your rifle for consistent results. Shooters leave this course with their rifle data collected and ballistic program ready for their next shooting adventure.

Rifle Set up
Fundamentals of Marksmanship Review
Zeroing Your Rifle
Doping your Rifle to Distance
Truing your Ballistic Program
Wind Calling Methods

Required Gear
Rifle (1MOA or Better)
Scope with Exposed Turrets
Bipod
Rear Bag
Shooting Mat
100rds Ammunition
Ear Protection
Pen and Paper for Notes
Lunch

Positional Shooting/ Competition Prep
1- Day on the Range
If you are Hunting, Competing or just shooting for fun, knowing how to build a proper shooting position off the ground or on an obstacle can be fun and challenging. This course will teach you the best way to build these positions and manage your recoil to see what happens down range.

Short Review of Fundamentals
Position Building
Shooting Process
Time Management
Match Process
Stage Process
Mental Management

Required Gear
Rifle (1MOA or Better)
Scope with Exposed Turrets
Front/Positional Bag
Bipod
Rear Bag
Shooting Mat (optional)
100rds Ammunition
Ear Protection
Pen and Paper for Notes
Lunch