308 Lapua Brass - 3 x 100 (Same Lot), 2 x 100 (Same), and 1 x 100 - $325 for all - Shipped!

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

They have been through a gun room move so the boxes might be a little scratched from being stacked during the move.

Brand new, never fired 20” 1/12 tw, 5/8x24. Came with new AT rifle I just purchased. I don’t shoot .308 but it was all that was available.

$625 $600 shipped to lower 48. PayPal FF or you pick up fees. Also take Zelle and Venmo.

BOLT TX60C Thermal Weapon Sight 1024x1024 60mm​

Purchased new from Outdoor Legacy in July 2024. Includes the ILR-1200 rangefinder and an Arken scope level. The scope will ship with the factory quick-release mount and the full kit as new.

If you have not used one of these, the image clarity and features are incredible, by far the best stand-alone thermal I have owned. I've only used the scope at longer ranges, and the LRF and internal ballistics are very accurate and capable.

If you have any questions or would like to see some extended-range (450-600 yard) kill shots, PM me, and I'll be happy to provide you with any information.

$4,500 shipped

Possible trades:

• Tangent Theta JTAC ret glass
• ZCO MPCT1X ret Glass
• Impact Precision Action + Cash (new or very low round count)
• NOX 35
• Iray RH25V2

View attachment 8651644

They went on strike cause they wanted more pay, while they were striking ticket quotas fell- revenue fell- and now they are being fined for not bringing in enough revenue.

And now they admit that they are just revenue generators. How many times does that chief say “ they are punishing us for not writing enough tickets “

It glorious to see two groups that ya hate eat each other in this case Dems and pigs .

I have about 1400 pieces of 1X fired Hornady brass, came from factory Hornady 140g ELD Match ammo. Is this okay to reload, I’m just starting to reload and never done it before. I know I can’t get as many uses out of it and that’s fine but thought it would be okay to learn on but I want to get precise ammo also.

I’d just as soon sell a majority of it but don’t really know what it’s worth, as of now it hasn’t been cleaned or deprimed.

Expires in September.
$350 tyd.
Pm please.

I was looking to buy a modular die. Sac is closed on the weekends so I’ll ask this here.
Is the decapping expanding mandrel included with the modular die? I’m assuming not because there is nowhere to input the size you want based off sac calculator.
Also do I really need the sac wrench or can rubber coated vise grips work?

New - Accuracy International Two Stage Competition TRigger for AW, AX, and AT - $295 Shipped


Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

I’m hoping to hard reset a set of sig 10k binos. Does anyone know how?

Reason is DOF doesn’t share to my kestrel and both companies told me to reset everything. Which I got the kestrel done.

I could wait for the response from sig but thought maybe someone here has the answer quicker.

Hornady 6mm 108 gr ELD - 100 Count Box x 33 Boxes - Same Lot - $800 Shipped


Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

He is Risen !!! Happy Easter everyone. May God bless you and protect you and your family.

What has been your experience with the H&K Rifles, and what kind of accuracy and distance are you getting with them?

I wished to start a thread showcasing various distances and precision of the Heckler & Koch MR762 (US) and MR308 (Europe) or, if possible, those who have access the M110A1 CSASS/SDMR. I have about a year on this platform, and have worked hard testing factory loads. I have an extensive writeup on this platform on HKPro HERE but, I wish to focus specifically other's extensive expertise of precision and long distance shooters here.

For those who respond with their own shot groups, please share the following:
1) Which Rifle? (MR762, MR308, M110A1, G28, G27)
2) What Barrel Profile? (Barrel Length, Heavy or Medium Contour)
3) What round used?

Included are some of my best groupings. Both rifles I run are Heavy Contour 1:11 Twist 16.5" Barrels. DOPE is as identical as they can get with the two. For the tightest groups, they seem to love the Hornady TAP ELD AR 168gr. Running the Federal Berger 185gr Juggernaut has been a laser beam out to distance. I plan on reporting more as I train and compete more with these two.




I rarely post, but I hope I can be more active here as I get out and shoot more. Thanks for indulging me.

Hey y'all recently got a 22 creedmoor built. 18inch barrel 1-8 (supposed to 1-7 twist). Anyways already ordered some 90 a tips and I have a lot of varget powder laying around wonder if anyone has some load data with varget and heavier bullets? I'm thinking maybe it's too fast burning should go restock on some h4350. Yes scope is not even attached.

6.5mm .264 143 gr ELD‑X - 100 Count Box x 17 Boxes - Same Lot - $525 Shipped

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Berger 6 mm 105 Grain Hybrid Target - 2 x 500 Count Boxes - Same Lot - $325 Shipped

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Excellent condition. Clean. Used one day.

$35 shipped

Less than 100 rounds. 26” 1:7.5 GT Criterion Remage. Bull barrel profile. SOLD shipped.

Titanium CB brakes by SRS to use with your thunderbeast CB compatible suppressors

1.2oz lighter than steel

$155 shipped

I loaded up 5 each of 124 126 and 128 grains of vv n570 in junk Jamison grass; got 2925, 2975ish and 3015 fps with those all with SD less than 7; accuracy was kind of all over the place in a 1-10 twist Lilja barrel, 35"; pockets were loose to start with, starting to get ejector swipes at the 128 grain load but bolt lift easy.

COAL was 4.350" (IIRC) which is about 20 thousandths off the lands; Fed 215m primer

I then loaded up 5 each of 125, 127, 129 in Bertram brass. The 129 and maybe the 127 grain started opening up the pockets but no hard bolt lift, no bright ejector swipes; accuracy was even worse for this round in a 1-12 twist Bartlein barrel, 35". Like the first 3 shots through a freshly cleaned barrel went in a horizontal line marching to the left by 2 MOA each shot - I have no idea what to make of this. The remainder of the groups were 1.5+ MOA 5-shot groups which is NOT characteristic for this (or the Lilja barrel). Fortunately I had some 350 SMK loads (132 grain vv N570, about 3200 fps) with me that I know shoot lights out with both barrels and ran 3 through the Lilja barrel (all touching, about 3/8" CTC) and 2 through the Bartlein (touching, 1/4" CTC), so I know it's not me flinching and it's not the barrels.

I'm not sure what to do next, but I think I'm going to load some up with RL50 because I have that and it sinks 750 AMAX into one hole with my Lilja 50 BMG barrel.

My other observation is that the loss of 200-250 fps with the 390 gr bullet compared to the 350 SMK at 3200 (132 grains n570) and 352 grain CEB (3220 fps with 134 grains n570) all but wipes out the gains from the improved BC in terms of drop, but leaves it a little edge still for wind drift. I'm inclined to persist because I don't like solids and we're trying to develop a long range deer hunting round.

I have plenty of Peterson brass but intentionally started with less sturdy stock to detect pressure signs earlier. I wager that Peterson will be able to tolerate just shy of 130 grains n570 before it starts to give in to the pressure. I will report more results when available; please also share your own experience and thoughts below. Thanks!

SOA

ZCO 840 MPCT-3X 15 mil locking turrets. Comes with Tenebraex caps, black scope chap. Small ring marks pictured from my A419 mount. Asking $4,000 shipped.

Like the title says, looking for a manners stock for my cz 457. Hoping somebody has a take off from the precision trainer laying around...

30 Caliber 180 Grain Elite Hunter Rifle - 10 x 100 Count Boxes - Same Lot - $450 Shipped
Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Hello gents,
I have a Steiner T6XI 5-30x56 and accidentally over tightened the battery cap. I was able to get it off but had to back it out and apply force to it in reverse against the knob limits.

The knob still operates and changes the illumination, but since I have OCD from the Marines I am now concerned that the knob has too much play or looseness in it and I cannot remember what the knob felt like before when turning it to change the Illumination settings.

If anyone out there has a Steiner T6XI 5-30x56, or other magnification power, would you mind checking how smoothly the illumination knob rotates around. I do not have definitive clicks and the knob rotates quite smoothly. I can feel when the knob engages on the different settings, but I am just not sure if it is supposed to be more firm on the knob when you twist it around.

Maybe I will try and post a video of it if I can figure that out. But it is more a question of if the knob rotates smoothly on everyone's scope as well. On a Meopta I have there are solid clicks almost when changing the illumination, but totally different brand so cannot compare that.

Thanks much appreciated.

Used right handed Curtis Vector QC Short Action. 308 bolt. I have the QC set screws.

$1000 shipped, not looking for Trades

This has been used with Proof quick change prefits and headspaces correctly. Have some new 6 Dasher SS Competition Contour prefits that can go with it. $479 for a prefit with the action

Login to view embedded media
Wolfpack Armory is a newer company in the game that makes ARs and some cool hybrid AR-AK rifles. The MK5 is a duty rifle designed to be accurate and reliable. This is just my first look video, full review to come. TL;DW: Midlength Chrome Lined 16” Barrel in a medium profile, with a Plan B flash hider. Mine was shooting M193 at 3100 into about 1.5” groups. I’ll certainly be doing some accuracy testing for the full review.


And here is the first look at the Disrupter K

Login to view embedded media