New to reloading and have questions. Does tumbling with stainless media produce better or more consistent accuracy as apposed to walnut/ corn media ?

Swaro 30% off MAP certificate
Works out to be ~45% off MSRP due to lower MAP pricing
Expires 12/20/25
Asking $SOLD
Will send pictures of cert as it has all the info necessary, but can mail it if preferred.

I'm going to post a quick review, as I was unable to find much information relating to LMT barrel conversion accuracy, specifically relating to how a barrel performed before sending it to D Wilson for conversion versus post conversion results.

I'm happy to say accuracy seems unchanged following the barrel conversion, which is to say it is very good.

I used the exact same ammunition, loaded on the same day with the same lots of components. This is hand loaded 77 grain Sierra match king, but other ammunition from AAC produced repeatable results as well. All groups were 10 rounds fired at 100 yards.

The barrel I'm focusing on today is a 16" Bartlein 223 from Craddock Precision. Prior to sending it off, I fired this group from a mocked up traditional AR upper:



I just came back inside from firing this group post D Wilson conversion:


That high shot was my first round, some of that might have been me, dealing with 20-30 mph wind and I'm not necessarily a precision shooter. That said, I'm very pleased with the results. I wanted to document my very unscientific findings, just in case anyone was curious.

Like new. Mounted on my Scar 17s and sat in my safe ever since. Upgraded arms mounts ($150 value).

Asking $2,200 shipped. Zelle, Postal MO, Venmo friends and family or PayPal friends and family accepted for payment.

Price: $1250
Shipping: UPS to lower 48, buyer pays
Location: Metro Atlanta for local pickup

SEND ME A PM TO COMMUNICATE! I don't use the comments section on listings to answer questions or deal.

MPA Matrix Pro Chassis was purchased in 2023 and used in about 20 matches. Freshly applied Tuff Armor Black Cerakote on 1/9/2025 by a certified applicator and it looks brand new. The applicator said the factory MPA finish was the worst finish he's ever seen on a chassis, so this is an upgrade over even a new one. It was bedded for an Impact 737R action, but the bedding material has been removed so you can bed whatever action you desire. Details of the chassis are as follows:

• Adjustable bag rider
• Adjustable length of pull
• Adjustable padded cheek riser
• MPA vertical 3 grip installed
• Finger block
• Thumb rest
• 2 round holder
• GrayOps Matrix Pro external weights (aluminum)
• Front bridge with Picatinny rail
• Full length magwell plate
• Adjustable magazine slide
• Matrix Pro RAT RAIL

It will come with the accessories shown in the plastic container, which includes an MPA data card, two thumb rest variants, two finger block variants, a stubby bag gripper for the magwell, and MPA vertical 2 grip.

The MPA DN5 brake was purchased in March 2024 and used maybe 10 times. It has been cleaned in a ultrasonic tank. Thread: 5/8-24

HNT 26, Rem 700 SA, RH. Arca rail. Used a couple months. Love it but feel it is to nice for how I use it.
$1200 + shipping

$2700.00 Shipped lower 48 insured

Zelle or check

Non BT Unit

Works perfectly, passes internal test. Ranged boulders in shade 9000+ yds, animals 2000+, steel 2500+

I have a 5700 elite ab and I am probably average with the kestrel. I had it set up a few months ago with the wind speed to be showing the min, max, and avg in the weather mode. I went to try it at a match this last weekend it it’s not there now and I can’t find it on there anywhere. When I select wind speed all that is showing is the actual wind speed. I have toggled through the settings that you can turn on and off to see in the weather mode and almost like it’s gone. Anyone know where to find it?

And none of you HSLD guys better buy all of them. Not sure how I’m going to afford it but I guess I can eat ramen and tuna fish to save money.




Counter Sniper doesn’t have shit on this one. Glad Guns.com was in my inbox this morning.

Here’s the link
Elite

This is spreading…

Login to view embedded media

NF C542 ATACR 4-16x42 F1 MOAR.
Very good condition. Glass is perfect. Light ring marks and a couple of light handling marks. Pictures show condition well.
$1825 - * $1725 - $1600 Shipped & insured
PayPal F&F or Venmo gift

WTS: LNIB: Armasight Sidekick 640 with the PVS14 pano bridge!

Comes with the battery extender, two CR123s, a USB-C cord, latest firmware, spare rechargeable battery, case, original box, and quick start sheet. (Basically, everything that it came with and a pano bridge and rechargeable battery.)

$2300.00

I took pictures as best as I could, but I’m not good at taking pictures through the unit.

The visual quality of the image is much better than these pictures.

Firmware is included so you know the unit is up-to-date. Pictures through the unit are so that you know it works. It’s got a little less than an hour on it. Selling to fund a very expensive scope.



PP FF or Zelle

I will not reach out to you! Be aware of scammers! Please DM me on the hide if you have an interest!!

Upon reassembling my PVS-4, the objective focus ring becomes grabby (tight and not smooth) once the internal o-ring becomes compressed.
I noticed a white lubricant when I first received the scope, which I assume was lithium grease, so that is what I reapplied after having cleaned the threads as best I could.
Looking at the manual, silicon grease is mentioned for lubricating the o-rings, but no other lubrication is mentioned for the focus ring threads. Are these supposed to run dry? I'm wondering if the grease is actually causing the problem if those threads are not designed to be lubricated. Thanks for any first-hand advice.

Selling my v3, just don’t use it anymore. Excellent condition. Price is firm and shipped
$165

Nightforce SHV 4-14 FFP, Mil-R, illum, woth nightforce lightweight tall rings. Great scope. $650 for the package.



redfield 3-9. Black gloss, duplex reticle, minor paint loss on the viewing side. Clean scope overall. $150 shipped.

USSC did not grant cert to either of the two remaining 2A cases, Snope and Ocean State Tactical.

Login to view embedded media

Sorting brass this morning, never seen a primer strike like this.

This was out of an unknown rifle as this is range brass.

Is this out of a hobbed out AR 15 that had years of abuse, causing a hobbed out firing pinhole?

The weird thing is that it’s a perfect oblong circle around the firing pin hole mark.

Does someone knows this a primer that comes that way? Looks like it was from 2018.

Selling Un-Opened 30mm Dark Earth NightForce RAP-I Diving Board $150 shipped

Trump says Biden was dead in 2020?

Hello all, i have a JP LRP-07 (in 6.5cr if that matters) and i'll be shooting at my local range oftentimes at 100yds, but will be stretching it out to 500-1000 several times a year.

In addition to that, my eyes are getting older and it's getting hard to spot hits on paper with like a 1-8. So i'm looking to get in a bit closer.

Given these variables, would you opt for a 5-25 or a 7-35? I've heard good things about the 4-20 as well, but i rarely see them come up for sale.

Would love to hear experienced opinions about this. Thanks.

Dead Air Keymo hub - 1 3/8-24 -- sold


Dead Air Keymo flash hider 1/2-28 5.56 -- $70


Dead Air Keymo Brake 5/8-25 7.62 --sold



Pretty much brand new. Mounted about a month ago.


Hub and brake have less than 40 rounds, flash hider has 3 rounds through it. Muzzle devices have shims included.

Hi all. I have been using TL3s for a while and have a bunch of shouldered prefit barrels for them but thinking of picking up an Origin so was wondering if anyone here has used the HLR and how did they work out? Thanks.

Login to view embedded media

To stupid to match numbers ?
Kill innocent people in the sanctity of their home ?
Violate every God given right imaginable?

It’s okay, job is hard you are good , we got your back!

This time and next time .

Didn’t some dildo here just ask who’s lives have been ruined by bad policing?

Redding .308 dies:
Competition set 58155 - $SOLD
308 case comparator 17155 - $99
308 small base 77355 - $75
Lapu .308 155 OTM SCENAR - $SOLD
Unfired LC brass 1035 pieces - $SOLD

. All prices include shipping. No bullets, they’re gone. PayPal f&f.

I decided to stray from my Vudoo's and other rifles that I rotate through at local matches, and picked up a used CZ 457 LRP.

It seems like a decent project gun, and I'll find out tomorrow how it shoots.

I need a Picatinny bag rider on the stock and wanted to see what you guys have used and recommend.

What do you recommend?