Ballistic Advantage 223 Wylde Mk12 Ops profile for the AEM5 brake and collar. 18 inches. Paint and marks from use.

Ran this barrel for about 100 rounds on a Mk12 Mod1. Went with a different setup when I decided cloning wasnt really my thing. It shot OK with factory ammo. About 1.5 MOA. I'm sure it would do better with hand loads or if you only shot 3 shot groups.


Only 75 shipped

Venmo gift or Zelle only. No PayPal.

No trades.

Yesterday I received a stripped upper I'd purchased from a well-regarded manufacturer for an SPR-ish build. While inspecting the upper, I noticed a variance in receiver wall thickness. For a normal build I wouldn't be concerned but I'm trying to squeeze as much accuracy out of this thing as possible. Is this worth bringing to the attention of the manufacturer for an exchange?

Mitutoyo 547-561s

Neck OD and wall thickness guage

Measures to 1/2 of thousandth ( 0.0005)

New condition with case

Sold shipped

Looking for tan color dump pouch Blue Force or Blue Alpha preferred with clips thanks

Gray Ops Magneto Speed V3 Mount, full kit which includes the Gray Ops QD ARCA throw lever.

$100 $150 shipped / PayPal

L3I elite Rimfire mag brand new never used $60 shipped

I have a new Impact 737R, in a Manners PRS stock with the mini chassis. This is the first bolt gun I've built, other than 22's, and I've never had a single mag feeding issue. I have a few Accuracy Internationals, two SA and a LA. I have never had feeding issues no matter what barrel i threw on them.

Being this is my first "custom" short action, i did some research and it looks like either AW and AICS mags will work with the new Impact 737's. I have tried 1 - 5 round Accurate Mag, 2 Metal MDT 10 round mags without binder plate, and one with the binder. I have been messing with feed lips for the last few days periodically, but cant seem to get the thing to feed consistently. The rounds initially would just nose into the feed ramp. So i slowly opened up the front feed lip to give the round an upwards angle, and this is where it gets weird. If i put 10 rounds in the mag, it "typically" will feed rounds 10,9,8,7,6,5 fine, then 4 and 3 will usually nose into the feed ramp, or the case mouth just barely catches the feed ramp enough to jam and mess up the lip. Then, rounds 2 and 1 will feed fine.

I just received the MPA lip tool to adjust the lips a little bit more precisely than damn pliers, so i will mess with it tonight again and see.

I have the primer about 3/4 or more showing on the back of the mag. Seems like if i go more than that, the rounds will puke out. I figured once i was able to get rounds to feed, all of them would feed since I had the front lips opened slightly, but it seems like that isn't the case. I get about 50-60% success rate. I will add pics of what a loaded mag looks like when i get home. Any insight is appreciated. I have also ordered an AI AICS mag as well as an AW mag to try. No clue if it'll make a bit of difference, but figured it was worth a try.

Faxon upper
22 ARC
16 inch barrel

1 box through it - 88 eld factory ammo
Didn’t shoot any groups but was able to hit at 600 with no issues
Ran fine suppressed

500 tyd

Title says it all. Everything priced to sell so I can leave my crazy wife.

Original boxes and accessories included.

Leica Geovid Pros 10x32 LRF - SOlD
Vortex Impact 4000 - SOLD

Up for sale is my Zeiss conquest gavia 85 spotter scope. It is in like new condition not a scratch on it with the brace & lens cap. Will ship in original box 1000$ pp f&f or you pay the fee for normal pay pal. Will include Leupold alpine tripod for an extra 200$ Thanks for looking!

Looking to purchase a m&p 2.0 slide

Copper MDT ACC gen 1
$700 shipped OBO, need gone asap

Comes with adjustment wheels for buttstock and cheek riser and some homemade weights.

Just picked it up today, it won’t make weight on my NRL rig like I thought. My loss is your gain.

Selling my Atlas PSR standard bipod with ADM-170s Picatinny Mount. The bipod has only seen 2 outdoor "light-work" trips to the range and then only used on the wooden benches. One day for LR qualifying and the other for ammo selection. It spent its time before that in the safe and on the living room rug.

Looks and functions like new! Just switched to a CAL.
Will not ship in OEM packaging.

PRICE: SOLD shipped to your door.

Accepting Paypal FF and Zelle only. No notes.

AVOID SCAMMERS! PM me first. No business in the thread.

I have an impact precision bolt with 20 moa cant built in. I am trying to decide on getting a Spuhr scope mount with 10 moa cant or 0 moa cant. With the 10 moa cant scope mount (30 moa cant total) it seems it would put the zero for the Vortex Razor with about 8 mils of downward elevation. My question is if this is still within the area that would have ideal clarity and field of view. I know the closer you get to the edge/limit of the scope the optical clarity and field of view can get worse. Thanks!

BLUF: I'm requesting feedback on a BCG for a DMR build, (build list below).

Alright SH fam, I will start a DMR build soon. I will post a voting poll for the BCG, but I am also interested in your thoughts on the other items in the build list as well.

Preface:
I know I could get a (quality rifle) for the amount I will spend on the parts list (or less), but I wanted to get into the hobby of (Building) AR's. This is my first AR build (EVER). So I request that the feedback be focused on the items in the build list & your experience with these parts, or parts you believe to be superior to them at or near the same price point.

Context:
In an effort to subvert the (should have spent that money on training) comments; I have attended 485 hours of credentialed firearms training with reputable training instructors. I try to attend 2-3 classes annually to stay proficient & improve my skill set. This rifle will be used for DMR roles during training missions. I train with a community defense group regularly.

Build list:
1. Ballistic Advantage 18" 223 Wylde SPR fluted SS rifle length, Premium Series, 1.03″ Gas Block Seat for .750″
2. Aero Precession M4E1 Pro stripped lower
3. Aero Precision M4E1 Enhanced upper w/ 15'' handguard
4. BCM carbine MilSpec buffer tube
5. Armaspec AR15 Gen4 C/H/H2 Stealth Recoil Spring Kit:
6. B5 Systems furniture
7. Rise Armament RA-140 Super Sporting Trigger (DTOM)
8. CMMG lower parts kit
9. Fortis Manufacturing tapered castle nut/end plate K1 system
10. Forward Controls Design Stoner 63 style compensator (DA Keymo)
11. DA Sandman S
12. Riflespeed adj. gas block (7543)
13. Radian Weapons combo charging handle / Talon safety
14. DTOM themed; forward assist / take down pins / ejection port
15. Aeroshell 64

Optic Choices:
1. Vortex Razor HD 1-6X24 in Badger Ordinance C1 mount W/ 45 degree offset 509 ACSS
2. Vortex Diamondback Tactical 6-24x50 in Vortex Pro rings w/ 45 Degree offset 509 ACSS

Secondary Feedback, Anything else I will (NEED) besides tools below:
1. Dimpled roll pins
2. Interchangeable brass, metal, nylon hammer
3. Wheeler bolt catch install punch
4. Real Avid AR15 Master bench block
5. Midwest Industries professional armorers wrench
6. Midwest Industries upper receiver rod
7. Wheeler trigger pull scale
8. KZ AR15/M4 Receiver Extension Buffer Tube Block
9. in lb torque wrench
10. ft lb torque wrench
11. in lb driver

Watch out for this guy1sickpuppy [email protected]. He just messaged me when I commented on a post for someone else and trying to get me to pay him with Paypal F&F.

Without Warning - Tuner Muzzle Brake (GEN 2.5), Electropolish, 5/8x24 3A UNEF, .264 Cal​

$275+Shipping
(856) 381-2409 (Txt me with any questions)

KAC Pvs30
Green factory refurbished unit
Includes original Knights box and extra black KAC lense cover as well
Clean glass; never stored with batteries and locks up tight on pic rail
1728 FOM
$4900 shipped and insured
***Sold Pending Funds ***
Zelle, USPS MO, cash FTF in northern OH or Southeast MI

Refurb unit with green tube

I’ll get pics of it up and running
Not much use; I just do not have the time to use it

Not really in need of trades, but I’ll ad some later if there is little interest

Black 34mm 1.27” height 0moa cant - $300

Brand new here and don't want to take a misstep. After perusing the site for a few hours, I came across a WTB post asking if anyone has a particular rifle for sale. I have the rifle mentioned and I would like to sell it. Not being a 'supporter', is it against group rules to reply to that WTB post? Hope to hear from a site admin or moderator. Thanks again for having me.

Unbecoming!

Login to view embedded media

Thoughts on the Andres PumIR? Couldn't find much in the way of reviews.

Similar dimensions & weight to a Voodoo S and RH25 while priced about halfway between the two.

Which would it be?

Selling my excellent condition Badger Ordnance C1 34mm 1.70" mount (0 MOA) with ACD bubble level (ACD level is no longer for sale).

SOLD