Brand new MK Machining 34mm Ultra Low Profile Billet Scope Level

$old.
Discreet PayPal Friends and Family or Venmo gift.

Only used a couple hundred rounds on a RimX. As new, great trigger.

$175 shipped
PP F&F/Zelle

See below.

$105 delivered by USPS.
- 50 Alpha brass in the Alpha box, sized to 300 and necked back down to 7mm to fit tight in my chamber. 23 brass once fired in my 7mm Tikka, the remainder unfired.
- 54 Remington brass, once fired (some de-primed, some not) no box, in a baggie.
- 30 Hornady once fired.

I'd also trade for 100 NEW Alpha 308 or 6.5 creedmoor cases.

Bullets sold.


PayPal, Venmo, Zelle



1

Looking to buy 2 sets of the 120mm dependabilt sidetrack weights for my AI

$225

Thanks

I have been hitting dog towns for the last 6 years with buddies. Running 223 Ackley. Initially I was running a Proof Competition Contour that I had a local smith open up to Ackely Improved. IT would shoot bugholes with 53 VMax at 3400 and 77 SMK at 2960 - XBR8208. I screwed that barrel up with a 6mm Cleaning rod. Yes (6mm wont go far down the barrel of a 223). Bought a Bartline CF 26" 223 and had it chambered to 223 AI. Shot ok groups, but the loss of weight lost some stability. Had my smith spin up an Ospery 1.25 straight taper in 223 AI and took that the last 2 trips. IT shot 80 ELDM's pretty tight, but seemed less so with the 53 vmax (3400) and 62 eldvt's (3200).

I need new Barrel (old setup wont fit in new stock) and am looking at Remington Varmint/Sendero contour. HERE IS THE REAL QUESTION. What rifiling do I go with. 1:7 is my thought - though I could be ok with 1:7.5 or 1:8. In PRS the 5R was the answer for consistent accuracy in a 6mm. Looking at Bartline's website they indicated short light for caliber bullets 35-60 in 224, dont really like 5R rifling....... This kind of consides with my current barrel accuracy issues (perhaps percision is a better term)

Anyone got any feedback with 4 Groove vs 5R in lighter bullets on a 223 Centerfire?

Thanks for the feedback.

Anyone have any experience with Grey Birch chassis? I am thinking about getting one for a tikka t1x, but I don’t see much feedback from actual users.

Anyone have experience with both. I’d be using my rangefinder 50/50 Archery and Rifle hunting. I live in Western South Dakota with lots of wide open prarrie.
Wondering if the 10X would be too much for Archery hunting?
I have an old Leica 1600B but no Bluetooth sucks.

Just wondering everyone’s thoughts.

Ok I have been very frustrated with my rcbs chargemaster 1500. I’m looking at buying a creedmoor sports scale or do I go to a addy scale? I would like to advently upgrade to a v4 autotrickler or a ingenuity. How are the creedmoor sports scales?

I've been using an MPA comp chassis since I began shooting a few years back. Lately I've just not been happy with it or maybe I just want a change for no real reason. Anyway onto my actual questions.

I shoot primarily team sniper type comps and PRS. I'm thinking I'd like a lighter chassis for field matches and a heavier chassis for PRS that I could just swap out. I've been looking at the KRG and MDT but never held or shot them before. Tell me what y'all have. Give me feedback on what you like about them and pictures get bonus points.

After seeing recent vids on 6 ARC from Greg and the guys at Full Circle Reloading, i'm highly considering a 6ARC gasser. I don't reload much but i do utilize guys like V3 munitions and others that can load ammo for me(i sold off my reloading gear a few years ago due to financial circumstances) and i'm looking at alpha and peterson brass for these.

What is everyone's experience with these brands in 6 arc and what have you noticed?

Also anyone have any good loads for 108 elite hunters for 6arc?

I go through the ARs I compete with and replace cam pins, firing pin retainers and this year I decided to change buffer springs. My main competition rifle is five years old and though it only has about 3500 rounds in it I figured why not.

Main rifles have mil spec carbine receiver extensions and all have 4oz Spikes Tactical carbine buffers. I ordered three Springco blue springs and swapped them out. Blue slings were about 1” longer than the ones I pulled so I thought at the time I made a good choice .

Issue 1. Shot about 60 rounds down a 14.5 with 5.56 RC2 ran fine. Cases drop 3’ away at 4 o’clock. All good. I put the rifle up dirty with an ECI in it. Pulled it out to get it ready for some shooting after our 3 x 1000 today. Remove the ECI, hit the bolt release and nothing. Bolt didn’t budge. I pull the charging handle back a couple times and nothing. I smack the stock with my hand and the bolt dropped. Cycles fine afterwards and shot fine but this was odd. Never seen this before. Tube and buffer are smooth, no scratches, no excessive fouling.


Issue 2: Today I bring my 15.1” RECCE out with AEM5. First time I have shot it with the new spring. I can’t get through 4 shots without the bolt skipping over the case and jamming the rifle. Did it four times. Buddy had his 14.5 with him with standard mil spec spring. We swapped them and it Ran through 30 rounds with no issues.

I’m not shitting on these springs but I’m not happy . It seems like the one in the 14.5” bound up and the one in the RECCE was too strong/fast and wouldn’t reliably run with my USGI 30 rounder or my buddies 20 round colt mag.


Anyone else ran into anything like this with these blue springs?

Having an issue setting it up. I watch youtube videos and basically everyone is doing something different, and their brass all looks different. No idea whos right/wrong or what anymore.

The best brass I saw which had an even golden anneal past the shoulder was actually a PrimalRights video but hes using a BenchSource. I haven't found that with any videos on the Giraud, and the Giraud instructions basically say put 750 Tempilaq in it and get it to the point where it melts it and thats it. When I do that, I don't get the nice annealed color/pattern like you see on 5.56 brass from the factory. Is it even supposed to do that?

Anyone have any gas and timer settings they use on the Giraud I can try and base a trial/error off of? Anyone know of an actual video for the Giraud thats correct and the brass looks the way its supposed to?

For those of you shooting 16" Grendel ARs, what velocities are you getting with your 120s and 130s? (or any weight for that matter)

Nightforce ATACR 7-35 x 56

• C569
• First Focal Plane
• Illuminated MOAR Reticle
• Includes sunshade, lens covers, box and all paperwork

Rings-IOTA Triad Z1

• 34MM
• Low
• Key system. Minimizes rail shift.

This setup is like new. Glass is perfect. No scratches or dings.

SOLD shipped CONUS. PP F&F (no comments), PP +4%, Check or USPS Money Order.

No trades.

White Oak Armament knows exactly what it takes to make award winning gas guns.
The barrel nut is important. Which is why they use a massive steel barrel nut on their builds.
Bought this for a precision AR build. Assembled the upper. Never even shot it. So I’m parting it out.
14.6” White oak TRM-Mlok Handguard
With Whote Oak barrel nut wrench $120 shipped
Paid over $200
Brand new.
Thanks for looking
Cross listed

Zermatt short action comes with both magnum and 308 bolt face ,mpa comp stock,diamond trigger , comes with 25x47 barrel approx 722 rds cones with ace break and 300 brass 3 times fired ,6.5 prc proof barrel about 200 rds down the pipe,6.5 prc mag hornady 6.5 prc dies,6xc light and proof barrels,dies 500 rds brass,7 saum ppr barrel 50rds down barrel dies 100 rds adg brass zermatt action wrench whole package shipped and insured 5000. Obo with scope 6700 obo

Prices are shipped, willing to sell as a package for less or prices individually below:

Dillon S000022 XL750 Progressive press, new in Dillon Box - $SOLD
Dillon 22059 Quick change kit for XL650 / XL750 (QTY 2, new in box) - $SOLD each
Dillon 10443 Machine cover for XL650 / XL750 (new) - $SOLD
Dillon 17950 Roller handle assembly (new) - $SOLD
Dillon 21101 conversion kit for .222 Rem Mag , .223 / 5.56mm , 22 nosler for XL650 / XL750 - $SOLD
Dillon 10096 Carbide .223 rifle dies (3, new) - $SOLD
Dillon 14406 Pistol dies 9mm (new) - $SOLD

I just ran across this ammo. Jacketed, not plated, .22lr ammo. Does this mean it's safe to shoot out of a non serviceable suppressor without worrying about leading?

CCI Uppercut

Does anybody have a good way to get a hold of somebody that can help me get logged in to my main account? I can't get up with anybody.
It says I need a verification code from the app but I'm not logged in on the app and as soon as I try it redirects me to the same page that ask for the verification code.
This is a second account I created so I could get in contact with sombody but I'm still not have success.

Selling two of my LPVO scopes. Both are in great shape, and are great optics, I just wanted to switch over my LPVOs from BDC to Mil reticles.

-Vortex Strike Eagle 1-8 OPMOD w/generic cantilever mount. Has AR-BDC3 MOA reticle. Includes box and accessories, as it would new. Asking $180 shipped

-SwampFox Arrowhead 1-10x w/Burris PEPR cantilever mount. Has Guerrilla dot BDC long GREEN reticle. Includes box for scope, and mount, and all accessories, as it would new. Asking $375 shipped

i know, i know…im not a guy w a bunch of high end optics, have made due over a few decades(yea older guy w 4 grandkids approaching retirement) using mostly super snipers, first the original 10x MIL/MOA versions, then added a couple MIL/Mil ones. grabbed a PH 3-15 many years ago as my lone alpha scope. been doin rimfire comps, and some LR steel shooting w the same scopes ive had forever it seems. Im one scpoe short, for a 300WSM thats been on the back burner for ages, but ive finally been working with and getting some decent results.

anyways i walk into a shop today and see they still have a Tangent Theta 3-15 professional MOA thats been there for over a year, but theyve dropped the price to 2500, could probably get it out the door for closer to 2k cash….tempting, but i gotta admit i feel slightly disadvantaged when i pick up one of my rifles still topped off w a MOA super sniper.

thoughts? all appreciated

lear

Interesting to see if it comes to frustration or fruition.

Scope is literally brand new in perfect condition. Items in box have never even been unwrapped. Pepper flake size spot wher paint is chipped shown in picture. Had it in a leupold ims 35mm mount which is also available to buy on my 5.56 for a few rounds. $1,750 shipped for scope $150 shipped for mount.

beautiful italian shotgun. Caesar guerini Magnus Light in 20guage with 26” barrel. Hardly shot. Comes with the hard case. Please no trades. Happy to ship to an FFL at buyers expense.
$3950

Saw this treatment on the news tonight. Thought might be of interest to some of yall