• Thanks to everyone who joined The Shot You’ll Never Forget Giveaway!

    We'll be announcing the winner early next week, keep an eye out!

    See the contest

Filter

.300BO AICS Magazines?

I just got my stamp back on a short little .300BO set up. I have two .223 Accurate Mags and a .223 steel MDT magazine and neither one of them feed properly. The shortened overall length of the round is causing problems.

Are there .300BO AICS magazines out there? The only other magazine I know of is the MDT polymer magazine. I would really hate to have done all of this and not be able to find a magazine that works!

thanks

SOLD SOLD: 200x pieces of 2x fired Lapua 6BRA Brass - PRICE DROP!

Up for sale are 200x pieces of Lapua 6BR brass that's 2x fired/fireformed into 6BRA. This lot is made of:

-101 pieces that have been fully prepped (deprimed, tumbled, annealed, FL sized, mandrelled, cleaned again and primed (CCI 450s)), these are ready for you to load
-98 pieces that have been deprimed and tumbled, you'd still need to FL size before you can prime/load.
-1x piece that was used in an AMP Annealer, Code 0154, this piece is of course non-usable.

Price for the lot is 180 shipped to your door, but please note these brass will NOT ship in the plastic boxes shown in the pictures, they will ship in ziploc bags (properly separated) inside a cardboard box, I will make sure it is properly packed so no case mouth dings happen.

Acceptable payment methods are discreet (no comments whatsoever) PPFF, Venmo & CashApp.

If you have any questions, DM me.

Attachments

  • IMG_8817.JPG
    IMG_8817.JPG
    829.6 KB · Views: 65
  • IMG_8815.JPG
    IMG_8815.JPG
    579.6 KB · Views: 54
  • IMG_8816.JPG
    IMG_8816.JPG
    825.4 KB · Views: 59
  • IMG_8819.JPG
    IMG_8819.JPG
    496 KB · Views: 56
  • IMG_8823.JPG
    IMG_8823.JPG
    299.4 KB · Views: 53

Accessories AK buttstocks, 3 under folders , 1 fixed wood

3 Under folding AK butts, New in package w/ mounting hardware. 2 have sling attachment, 1 does not. Side rails are milled round bar, not stamped.

1 Dark Wood fixed AK butt stock w/ metal trap door butt plate and sling attachment.

I don’t know shit about any of these. Came with a bunch of stuff I bought from a friend who was moving.

$60 each shipped or make an offer on the lot.

Pics won’t load, please PM if interested.

Thanks!

Precision Rifle Gear Let’s Talk Bipods

Let’s Talk Bipods!

Im curious as to what Bipod styles and brands everyone is running on their rifle builds. I do a lot of deer hunting but have recently started getting more into the Rimfire NRL22 competitions and I am looking for a bipod that is a good all around option that gives you the best bang for your buck!

Firearms Custom PRS Ready 6.5 CM - KRG, Tuebor, Bartlein - Trade/Sale Pending

I switched things around a little bit so this one is up for grabs in a slightly different configuration than before. The KRG is in good condition, I just need to get the dirt off of it that is in the picture. I will get it cleaned up prior to shipping.

Tuebor Raider Action
Bartlein MTU 24" 1:7.5 twist, threaded 5/8x24, cerakoted black
APA Fat Bastard Break Gen 2
TT Diamond
Round Count 330
KRG Gen 4 (aluminum) W3 Folder w/ front spigot pic rail
Weight ~15lbs

Optics, rings, and bipod are not included but can be added for extra.

I have a ton of ammo that can be sold to the buyer of the rifle at a discount if desired.

$2,500 shipped. $1,000 for the chassis and $1,600 for the barreled action if split.
Only trades would be mil/mil FFP optics (can add cash if needed).


IMG_3927.jpeg

You can’t make this up, volume infinity.

A staffer of Cory Booker, LEADING ENEMY of the Second Amendment, was arrested for carrying a firearm on Capital grounds. AFTER, he was led around security by none other than Cory Booker himself.

59 year old Kevin Bates, a former detective, now a driver for mr. Hooker, I mean booker, was arrested, after being informed that carrying a firearm on Capitol Grounds is not allowed even if the person being arrested is a former police officer or has a license (or permit) to carry a firearm in Washington DC or anywhere else.

Ok me but not for thee.

SOLD Brand new Bushnell LMSS2 H322 spotting scope

Bushnell sent me this as a replacement for an old ERS scope that they couldn’t fix and were sold out of all the scopes I was interested in. (It was my fault it broke, they were absolutely amazing to deal with and offered this instead of waiting for the scopes to come back in stock!)

I received it tonight in the mail, opened it to look at it and take photos, then put it back in the box. Looks like a pretty awesome setup but unfortunately I don’t have a use for it.

I’m open to trades, mostly interested in 9mm pistols currently but open to other ideas.

$1400 dropped to $1050 shipped CONUS.

Attachments

  • IMG_2266.jpeg
    IMG_2266.jpeg
    436.9 KB · Views: 140
  • IMG_2267.jpeg
    IMG_2267.jpeg
    488.9 KB · Views: 139

Accessories 6.8SPC Barrel, Dies and projectiles

11.3” Wilson Combat 6.8SPC barrel (300ish rds) and accompanying gas tube, Hornady seating and full length sizing die, shell holder, and 98 Hornady 110gr V-Max projectiles. Shot factory 110gr Hornady black but switched up calibers before I actually got to reload for it. $175TYD

Attachments

  • IMG_0240.jpeg
    IMG_0240.jpeg
    1.6 MB · Views: 26
  • IMG_0241.jpeg
    IMG_0241.jpeg
    1.3 MB · Views: 26
  • IMG_0242.jpeg
    IMG_0242.jpeg
    1.4 MB · Views: 22
  • IMG_0243.jpeg
    IMG_0243.jpeg
    1.7 MB · Views: 24
  • IMG_0244.jpeg
    IMG_0244.jpeg
    2.3 MB · Views: 25

Accessories RRS TA3 leveling base / clamp, Griffin 3 Lug Interface

RRS TA-3 leveling base with Arca clamp
I do not have any hardware other than what is pictured. I can try to source the screws or you can get them from RRS.
A little wear and tear
$175 shipped

Griffin Armament
3-lug interface mounting system 9mm, used for approx 2-300 rounds. Compatible with Silencerco
$85 shipped

Attachments

  • IMG_3822.jpeg
    IMG_3822.jpeg
    97.9 KB · Views: 50
  • IMG_3821.jpeg
    IMG_3821.jpeg
    67.4 KB · Views: 48

SOLD Impact 6xc barrel, brass and dies.

I got a impact 28” proof 8 twist barrel, 6xc Tub reamer Barrel that has between 900 and 1100 rounds on it. It still shoots awsome with 108 eldm and 39.2 Rl16.
207 pieces of brass that has has been fired 3-4 times and is in good condition. Will ship in the boxes in the picture.
The dies are what they are and still function great.
$450 for the whole deal.

Attachments

  • 20250206_224012.jpg
    20250206_224012.jpg
    435.1 KB · Views: 70
  • 20250206_224004.jpg
    20250206_224004.jpg
    290.5 KB · Views: 77
  • 20250206_223954.jpg
    20250206_223954.jpg
    368.7 KB · Views: 74
  • 20250206_223949.jpg
    20250206_223949.jpg
    550.6 KB · Views: 75

Elysium AK-47 FINISHED WITH VIDEO

Work has begun on the Elysium AK-47 as used by Matt Damon. Parts are arriving and I am beginning fabrication after a successful proof of concept for the digital round counter.

What I'm building.

maxresdefault.jpg


Successful proof of concept for the digital round counter. A lot of fabrication before I decide on a final design, especially the placement of the counter. Possible placement on the side of the receiver or mounted on a 45 degree offset picatinny rail adapter.
Login to view embedded media

Firearms Tikka CTR in 6.5CM w/SWFA SS 10x Fixed- Package Deal

For sale is a great little lightweight package for a starter rifle or build.

Comes as pictured:
Tikka CTR in blued 6.5CM, 20” Barrel w/1 Mag
SWFA Super Sniper 10x fixed, MOA Reticle, Side Focus
Warne Rings
Magpul Bipod
Nylon Sling

Got it in a trade so round count unknown, but super clean. Tempted to keep it for a future build.

$1200 Shipped FF to your FFL

IMG_9919.jpeg

Accessories Misc bits CHEAP. Reptilia piggyback cap, Spuhr ACI, Glock RDS mounts, Seekins Brake and 700LA rail, AI spigot adaptor

Selling the following items. Includes USPS ground/first class shipping with insurance. Payment via Zelle or Venmo only. No trades.

- Reptilia ROF 90 RMR/SRO mount. This is for 30mm Geissele and Reptilia mounts. It’s like new. $75. *SOLD*

- Spuhr A-0023 ACI mount. Used but great shape. $45

- Seekins 5/8-24 self timing brake. New take off. $50 *SOLD*

- FCD OPF-G RMR mount for Glock MOS with Trijicon sealing plate. Some loctite residue from bedding with 620 that will clean off but otherwise great shape. $45 *SOLD*

- DPP GL-02Ti Titanium RMR plate for Glock dovetails. Like new. $25

- AI AICS/AW OEM spigot with sling stud and bolt. This was removed to install and Badger NV mount some time ago. $100 *SOLD*

- Seekins 700 LA 20MOA base with 6-48 screws. Has some residual residue from bedding but it’s been cleaned up and nothing that effect function even if you’re not going to bed it. Couple of dings in the anno but otherwise good shape. I’ll include some extra screws as well. $50 *SOLD*

Trades:

- Cases of Federal American Eagle 357 mag 158gr JSP.
- Cases of Hornady 44 mag 240gr XTP or Leverevolution.
- Trijicon MRO HD.

Attachments

  • IMG_1425.jpeg
    IMG_1425.jpeg
    544.5 KB · Views: 214