Anyone have some Alpha SRP 308 brass they might sell??? Thanks.

Got the itch for a 22arc for a coyote/plinking rig. Think about ruger American either ranch or predator in a mdt orxy chassis or a patriot arms precision hunter ar.

The 20 inch barrel ruger is hard to come by, I would prefer that length, but I'm sure 16 would be alright. The orxy doesn't have spots on the side for qd sling, but I could figure out something. Like the lss, but don't really want to spend that much on this.

I'm trying to build 6cm on tl3 with manners lrh stock, so that will be a big chunk.

Not sure if correct location to post this, but read a post from a memeber named "thewolf" a few years ago about setting up his own target camera system by cloning the Bullseye Target System. I'm hoping to find info from anyone currently owning this edition type of the Bullseye Ammo Can 300yd sight in Target Camera System , that could possibly share the GL-AR150 router configuration settings with the system on board camera FOSCAM Model FC1405PC. Hard reset of GL-AR150 mini-router caused the erasing of all Bullseye target system configuration for router/camera settings.

If not the correct location for this post, please direct me to the proper location on the site. Thanks!

I am perplexed with this. Still fairly new so perhaps I'm missing something obvious?

6mm Dasher, 30in barrel. I zeroed at 100y Used a free ballistic calculator to get the dial at 500y, showed 9.1 but what was accurate on paper was 8.5
No problem, environment etc affects.

Zeroing temperature was 68F and this was at 13F, if that affects.

300y - calculator showed 3.7, actual was... 0.5 up

What doesn't make sense is how my actual dial is up by only 0.5 at 300y when I zeroed at 100y
I haven't had a chance since then to verify at 100y again, that's my next step. Is there something am I missing or for some reason my zero changed drastically on its own?


Thank you

Up for sale is my RimX build, pre 2000 serial. Going a different route and focusing more on centerfire.

• 22” 1:16 ACE Blank, finished by Manzella with Eachus chamber
• TT Diamond single stage flat trigger
• Spuhr SICS chassis with adjustable bag rider and 6x external weights
• 1x RimX mag with +5 extension

Rifle shoots CenterX sub .3 consistently, I’ve been shooting Eley Match around .3, have Eley and standard extractors, extra tensioners and small parts as well. Rifle is balanced pretty much perfectly as it sits, I’ve shot 2 matches with this setup and the SICS is easily my favorite chassis.

Barreled action with mag only $2000 shipped
Complete rifle as seen $3500 shipped
PayPal F&F, Venmo F&F only
Rifle is truly a no excuses setup, I jumped in head first to rimfire and want to devote more time to centerfire.

Please, no trades.

Looking to sell my 22 inch MTU vudoo v22 360. Comes with aero solus chsssis, SRS weights, vudoo magazine/ammo case, 3 mags, trigger tech diamond 2 stage, and bore guide. Has roughly 2k rounds of SK red through it. I bought it new from Altus a few years ago. Asking $2400 shipped for everything. I don't have references here but have plenty on tacswap.

Up for grabs is my 6.5x47 TL3 Prefit, chambered by keystone accuracy on a Green Mountian Blank. The barrel is a hammer; another one is coming in for this action, and I don't want this to sit in the safe. The groups below are very common with this barrel.

24in threaded at the muzzle 5/8x24
1/8 Twist
Contour is Heavy Palma
Cerakoted Flat black
741 rounds down the barrel.
We will include load data and barrel log (every bullet and group shot out of this has been documented))


$350 $300 Obo shipped and insured to you.

Open to any Trades
6.5 140gr target hybrids
TL3 prefit in 6mm
6.5x47 components

10 round group (left) 3 round group (right)

I thought there was a gunsmithing forum, but I guess it went away. I put a tube of blue loctite down on a table a the lid was totally secure, so I got a thumb sized stain on the wood. I think it’s polyurethaned, the table is like 30 years old, but this is the worst I’ve done to it. In the doghouse.

Heat is out. I see acetone mentioned, but I’m worried about the finish. Anyone have experience or thoughts?

What is blues loctite? Some kind of cyanoglue?

Looking to sell 1.25” 35mm MDT Elite rings. Asking $140 shipped.

No box.

Reptilla 1.93” micro mount

Great shape, very low use

Lots of lint from my gun case in this photo!

$55 shipped

Atlas PSR BT47 bipod No Clamp
This is the 7-13”
Great shape

Sold shipped

So my Manners ELR light stock is at my gunsmith to be bed to the receiver, and I was curious what people use for the escutcheons? Make them from bar stock or pillars?

Thank you,
Scott

Selling a custom 700 build in 6.5 Lapua with less than 50 rounds down the barrel. Here are all the specs, all work listed below was done by Long Rifles Inc they even stamped LRI on the barrel. - $1200

Remington 700 short action (bought new) blueprinted, drilled and tapped for 8-40 screws
Bartlein barrel 22" chambered in 6.5x47 Lapua, medium Palma contour, 5/8x24 threads, chambered and installed
Bolt was time/tig, fluted, and striker pin bushing installed
Everything cerakoted black
Badger 20moa rail
Jewel trigger

It has over $2000 into it with all the parts and work

Only selling it because it never gets shot, I still have the rest of the initial 100 rounds I bought for it

I do believe it can be rechambered to 6.5 creedmoor without too much effort. I picked 6.5x47 Lapua because I use to reload before I had a family and kids

Not really looking for trades but I'll list a few
Zermatt tl3 or origin action (stainless)
Armasight sidekick or possibly jockey
Darpa xm3 stock

I accept most forms of digital payment, my PPff doesn't seem to work because it's a business account so you will have to add 4%. Shipping is included in the cost as long as your FFL will let me direct ship to them with a copy of my driver's license. If they require FFL to FFL only then add $50

I decided to go with HUB instead. It is unfired and is at my dealer under form 3.

$1050 shipped

Like the title says, selling a NF ATACR 4-16x42 F1 with MIL-XT reticle. Bought about a year ago and it’s been on the gasser. Perfect gas gun optic. Shows some signs of use but no abuse. Glass is great. Just selling to fund another 7-35 ATACR.

Asking $2100 shipped. Zelle is preferred but can also do PayPal friends and family (or you pay fees for goods and services).

For sale is a lightly used MagnetoSpeed V3 Ballistic Chronograph with the MagnetoSpeed Soft Case (+$50). The unit is awesome. I just upgraded to a more advanced unit and have not used it in a while. I will take $200 shipped or your best offer.


PP FF, Venmo, Zelle

FL Unc Foundry jacket, walnut color, NWOT
$200 tyd

Badlands Rev jacket, great condition
$50 tyd

Have a really neat rifle up for sale. This was built by Joe Walls while he was at Exodus Rifles prior to opening up Walls Rifles. He is still around so you don't have to worry about anything.

BAT TR Action
J Allen Custom KUIU Painted Chassis
Trigger Tech Trigger
Area 419 Brake
Vortex Gen 2 Razor 4.5-27 EBR-1C
Harris 6-9 Bipod
Apa Rings
2 Barrels 25inches long
Brand New 22 Creed barrel
6.5x47 with 1200 rounds down it

$5550 shipped to you.

Steel targets are 1000 yards with 100yard group on paper.

Has anyone tried the plugs only under earmuffs? I'm not willing to spend 1k on their earmuffs.

Currently using Comtac Vs with fomies underneath. Ears will still ring if plugs aren't touching my brain. I'm wondering if the ops core would be better.

Vortex strike eagle 1-8x24 30mm SFP
AR-BDC3 MOA reticle with Burris P.E.P.R mount. Only used a couple times.

$235 shipped to lower 48 in original box

I’ve gotten to the point I only shoot reloads, time to offload the rest of my factory ammo.

Buyer to pay actual shipping, as I’m pricing these at the lowest price found on Ammoseek per round.

Located in DFW TX for local deal.

Zelle (preferred) - Venmo - PayPal FF accepted - not looking for trades at this time.

1. IMI 5.56 NATO 77gr Razorcore - 240 rounds - SOLD

2. Hornady 6.5 Creedmoor 140 grain ELD-M - 360 rounds - SOLD

3. Federal Gold Medal Match .308 Winchester 175gr Sierra Match King - 340 rounds - SOLD

Hey, look. Stacy Abrams again. No wonder she was prosecuting Trump and trying to keep him from gaining the White House

She is at the center of another giant fraud scheme to fund democratic socialists.

Shocked... not!

Sirhr

So I’ve been lurking here for a bit and reading. I went to a local gun store and had a chance to look at both the Bravo Model and the competition model. The Bravo in 308 is on sale for $1,300.00 I really liked that specific. It felt balanced to me the bolt was pretty smooth and the trigger wasn’t bad. I know it can be replaced with a trigger tech or timmney.

I also understand that the barrel is a Ballistics Advantage so it’s okay it not a high end barrel. One of the gun guys at the counter who is into PRS said they have sold about 11 of them in both 308 and 6.5 CM and the guys that have bought them have had positive experiences with the Solus.

Now a salesman is exactly that regardless of commission or not. Those of you who have a Solus what is your opinion on them.

The last bolt gun I owned was probably 10 years ago or so. I had a Rem 700 LTR in 308. I hane a 15 1/2 inch LOP so I put it in an AICS Chassis system from Mile High Shooting as they used to be a sponsor here. It’s been so long since I was a member here that the Mega 10 AR was the latest and greatest. I had a NF NXS that I also bought from another site sponsor so it’s been a while and a lot has changed. I sold that Rem 700 set up years ago.

So those of you that own them what do you think? I will probably end up with a FFP of some sort like a Razor for and optic and an Atlas bipod or the likes. and with a 1:10 twist 20 inch barrel there are plenty of 308 ammo options besides FGGM like the Hornady ELD Match.

selling a long quad rail upper like new 700 shipped.

Looking to sell my Ruger Precision in 300 win Mag. This thing is an absolute tank. Comes with one mag, the vortex viper(6.5-20 x50) with sunshade, upgraded bolt knob, bubble level, and picatinny mount (small) under the arca rail. The muzzle break will be with it but off the rifle because I currently have an ASR brake that will stay with me as so the suppressor. Will come with about 100rds of assorted ammo. Will throw in the hard case too for that price.


asking $2,500 shipped

also might trade for a rimx or vudoo. PM with questions.

also cross posted