I just wanted to share a positive experience about Steelwater Gun Safes. I’ve had one for several years. It has very nice LED lighting, one bar on the side panel on each side, and they come on when you open the door. Recently, they stopped working properly, blinking weakly. I went on their website and submitted a customer service request stating my issue. I kid you not, like 5 minutes later I get an email from Keith apologizing for the problem and describing how to troubleshoot, and asking for my mailing address. I followed the steps, which were simple, and reported back. Next thing I know he responded letting me know the part(s) are on the way along with instructions to install. I’m very pleased.

I’m hoping some of you with some ECCO machine experience can help me out here. I have an AAC 762-SD with the 51T mount. It was my first rifle can and for its day it was a fine suppressor, but ever since I got my SiCo Omega it’s basically just been sitting in the safe. I recently changed barrels on my AI AE and decided to put the 762-SD on and try it out again. My results were less than stellar. Even after fitting the mount to the suppressor, my groups are noticeably larger with the cannon than without. For example, today when I went to the range I was seeing 1.11 minute groups with the can vs .78 minute groups without. To confirm this wasn’t a one off or a barrel specific issue, I also tried it on my 6.5CM AI and my groups were similarly larger after putting the can on.

My theory is that the main issue is in the mount. I just don’t think there’s any way to make the 51T mount as precise and repeatable as newer mounting systems, even after fitting. To solve this and not have to buy a new suppressor, I am considering having Ecco machine swap the factory 51T interface for the universal 1.375-24 interface. I believe* that would allow me to use an ASR mount as well as the direct thread mount that came with my Omega, which is currently gathering dust in its box. Before I commit to this though, I’d like to get some information and advice from those of who’ve already walked this path. My main questions are thus -

1: Am I correct in assuming that the most likely issue with my accuracy is the mount and not the actual suppressor itself? Have those of you who’ve gone this route with a 762-SD or similar AAC can seen appreciable increases in accuracy and precision after going to an ASR (or similar, modern QD system) or direct thread mount, or is the actual suppressor and it’s design at issue here?

2: Am I correct in assuming that my SiCo Omega direct thread adapter will work with an AAC can that’s been converted to the 1.375-24 interface?

3: since I’d like to keep this suppressor QD compatible, is the ASR mount an acceptable way to go for a precision rifle can?

4: For those of you who have done this or something similar, what were your general thoughts on the experience and results? Anyone other than Ecco worth looking at?

I’d love to hear feedback on any part of my diagnosis or my plan. I’d aLao appreciate any info on other’s experiences who have tried this or something similar in the past. I should also add; I am aware that there is an upgrade program through AAC that would basically turn this thing into a Ranger 7, however it’s much more expensive and I really, really like the tone and look of the old school AAC cans, especially on an AI rifle. I’d like to keep that style and tone if possible. Thank you all in advance!

I've had this unit for about a year now, purchased new from SOK and it comes with everything it did when I first opened the box. It's in great shape I just no longer need it. $9.5K shipped.

Nordic components MXT +6 magazine extension for sale. Comes with the tube, cap, Benelli adapter, and a brand new spring. Tube/adapter/cap is lightly used, spring is new. Fits Benelli M1/M2, SBE 1 2 or 3, and possibly some others.

$55 shipped

Has anyone reloaded using 308 federal gold medal brass? I have access to an absolute ton of it from work (swat sniper team). It doesn’t appear to be crimped either.

Anyone with experience reloading it? Worth it or no? I don’t have a 308 barrel, but I’m debating it just to use this brass.

I picked this rifle up on trade from another member and I absolutely love it. The gun ADD kicked in, though. I put just over a box through it, and it appears to have been shot very little prior to me shooting it (the paint around the crown was barely chipped). It shoots 175gr FGMM extremely well and that is all I have tried in it so far.

I'm sure some other members who are more familiar with these rifles can chime in about their history, but I gathered that it is the predecessor to the M24 SWS that had the adjustable stock. I called it the A1 just because it was the most I could find with a little Google searching, but I could be wrong. This has the more rare "B" suffix serial number and the barrel is marked 7.62x51 for the chambering. The trigger is absolutely amazing in here as well.

The rifle is topped with a Leupold Ultra 10X-M1A with the Premier Reticle crosshairs. It also includes the original factory paperwork for this rifle which is pretty cool. This would be an awesome gun for someone who is into collecting things more than I am.

$4,500 shipped for the package. I would trade it toward an AI AX (2014 style), AI AXMC, or AI AXSR. For the long actions I would prefer 300NM or 338NM but I can always swap barrels. Other than that I am pretty set on trades but always open to high end optics in FFP and Mil/Mil.

Yup, every Democrat Senator voted against the women and girls in America.

By saying that fucking mentally-ill, cock-gobbling, attention-seeking trannies should destroy women's sports.

Every. Single. One.

I'd ask 'Who is pulling their strings." Because it seems strange that there are so many so-called educated Americans who represent some 80 percent of the American People who think Womens sports should be for... say... women.

But I don't think I have to ask that question. Because the left is now so retarded that they believe more in transvestites than they do in letting the wives, sisters and daughters of America compete in sports, without having to have some failed dude who likes to suck dicks... compete against them.

So they are ALL completely idiotic. OR they are being paid off by a tiny majority of freaks to dance to the tune of rump rangers and sperm-burpers.

Sirhr

Custom Remington 700 in the most underrated cartridge made-.264 Win Mag.
features Matt Parry Custom Gunsmith- blueprint action and chambering on Krieger barrel appears to be #7 Light Target contour finished at 24" and .720".
Boyds Laminate Stock Brown-Green-Grey
Remington Trigger with all steel bottom metal-unsure brand comes with metal mag.
ceracoat appears to be in Sniper grey

lightly used and only fired a handful of times. good shooter weighing in at 12.00lbs with Vortex Viper 3-15 PST Mil scope with Mil tree and hollow center cross hair.
selling for a friend, gun is in hand and ready to ship.
lets make a deal $2300 $2100 $1700 $1600 $1450 buy it now as package or split

Welcome to 2025 guys

Happy to announce the Trinity Tripod is ready to go - Available to ship now

Been testing this one for the last half of 2024, and its ready to go.
The main goals were:
1. Equal or increase stability over a 2-section tripod
2. Maintain quick deployment
3. Make it more packable for travel, and smaller collapsed for NRL hunter and Tac Table rear situations
4. And of course, locking apex, to prevent collapsing when used for tripod rear
- Just like the Dauntless

I think we achieved all of those goals, hopefully you guys like it.


Login to view embedded media Login to view embedded media
for dealer inquiries and general information

Hawke Sport Optics Giveaway

We believe that 2025 will be an exciting year in the history of our giveaways. This month we are working with Hawke Sport Optics and have 6 great optics,2 each:

Hawke Endurance ED 10x42 Monocular - Stunning optics providing crisp, clear and bright images with enhanced light transmission. Endurance models benefit from our System H5 optics. ED glass is utilized to reduce color fringing. The Fully Multi-Coated lenses provide high resolution images which ensure no details are lost when viewing at distances down to 2m. Effortless focusing and impressive depth of field makes these binoculars quick and easy to use. Water and fog proof with a high grip rubber coated body, Endurance is designed to battle the elements.
Extra-low Dispersion (ED) Glass
Phase Corrected
High resolution phase corrected BAK-4 roof prisms
Focus from 2m
Twist-up eye cups with position stops
Stay-on lens covers
Nitrogen purged. Waterproof. Fog proof.
Hawke No-Fault Lifetime Warranty.

Hawke Endurance ED 10x42 Binocular - Endurance models benefit from our System H5 optics. ED glass is utilized to reduce color fringing. The Fully Multi-Coated lenses provide high resolution images which ensure no details are lost when viewing at distances down to 2m. Effortless focusing and impressive depth of field makes these binoculars quick and easy to use. Water and fog proof with a high grip rubber coated body, Endurance is designed to battle the elements.
Extra-low Dispersion glass for optimum clarity
Fully multi-coated optics to produce sharp images
Focus knob with 1.2 turns — close focus from 6.6ft/2m
High resolution phase corrected BAK-4 roof prisms
Lightweight rubber coated mid-size top hinge chassis
Stay-on lens covers for maximum lens protection
Twist-up eye cups with position stops for eye relief

Hawke Endurance ED 20-60x68 Spotting Scope - Endurance ED spotting scopes provide the performance to get close to the action and the durability you demand.
All magnifications are constructed with ED glass reducing the potential for chromatic aberration. ED glass controls colour fringing and allows an improvement in clarity and crispness of the image, highly recommended by nature enthusiasts. All lenses are Fully Multi-Coated and prisms Dielectric Coated for increased reflectivity. Endurance scopes feature a dual focus knob (coarse and fine), 3x ratio eyepieces with twist-up eye cups and retractable sunshades.
Extra-Low Dispersion Glass For Optimum Clarity
Dielectric Coatings Designed To Increase Light Reflectivity
Fully Multi-Coated Optics To Produce Sharp Images
Close Focus - See Detail From 16.4ft/5m
BAK-4 Porro Prisms For Intense Colour And Contrast
Dual Focus Knob To Achieve Ultra Fine Focusing
Body Rotation For Viewing In Virtually Any Position
Stay-On Soft Scope Cover For Maximum Protection
Twist-Up Eye Cup And Pull Out Sunshade
Digi-Scope Compatible For Use With Your Camera

If you are not familiar with Hawke Optics take the time to look at their optics, we feel you'll be very happy you did.

This months winner of the Swarovski Z5+ 3.5-18x50 - BT BRW is Jason S. of RokSlide

Congratulations

Remember to enter our March drawing for your chance to win a fantastic Hawke Sport Optics

It is our pleasure to bring these drawings to you each month to show our appreciation for all the support that we receive. Just our way of saying thank you.

We would also like to take this opportunity to thank the monthly winners for posting reviews of the products they have won. The forum members value your opinions, as do we.
Please go to our web site www.cameralandny.com and Enter To Win. Past entries will not be in this drawing. To keep the drawing available to those that continue to have an interest, each contest winner will be drawn from entries for that contest period.

Are you our next winner?

What are you waiting for? Just go and sign up. There is no purchase required and we are not selling your info to anyone.

Really Right Stuff (RRS)

• Tripod TVC-32G Mk2 $350
• Ball Head BH-55 SC $365
• Clamp SC-LR $100
• Dovetail TH-DVTL-55 $45
• Key Mod Plate $45

All items in excellent Condition
Price includes UPS shipping, PP or check (ships when clears)
PM for more pictures or info, thanks for looking

Selling (2) Used Sphur Mounts 6601. Both in great working condition

$300 Each

1 SOLD 1 FOR SALE

I have for sale a Barely used FALKOR ROC chassis in sniper gray. Remington 700 SA footprint. I have 1 weight panel in the front of the chassis.

Practically new.

Priced at $1000 PayPal f&f, shipped to your door! If your in the middle TN area, a pickup can be arranged.

Thanks

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

We've recently expanded our already extensive ZCO offerings to include all scope and reticle options in their competition line of optics. I have a good bit on hand and can also back order without anything down. Lead times very but are usually not too long. Call any time for questions or orders.

New condition Leupold MK5 HD 3.6-18x44 F1 TMR Mil Reticle with sunshade. Includes Leupold rings and bubble level as seen in photos.

$SOLD Shipped

PayPal Friend/Family Accepted

This rifle scope has been out for over a year. How does it compare with a Zeiss S3 or a Vortex G3 6-36. I'm an old fart and wear glasses ,I think the turrets are better on my ATACR , but the glass is equal to this SV111 ED.

I'm reading Frank Galli's book where in it's described using the first number of your bullets BC to determine the MPH of your rifle. The example, a 308 using a bullet with a BC of 485 to 496 is a "4 MPH rifle". One may then work in multiples of 4 mph (and not the traditional/usual 10 mph) to dope wind. I get this.

But I got confused when in a later it is said "I just need to know my brackets then do simple addition in my head." The example at 600 yards, with a 4 mph wind is the first bracket, so that means a .6 Mil hold. Makes sense to me. But it goes on to say "If the wind is 12 mph, I am in bracket 2, so the wind hold is 1.2 Mils." While 2 x .6 Mil = 1.2 Mils, I don't get 12 mph being in bracket 2. If I have a 4 mph rifle wouldn't a 12 mph wind put me in bracket 3 (12/4 = 3) ? And that's followed by an example 18 mph wind being bracket 3 with a 1.8 Mil hold (3 x .6 = 1.8). Again, I get how I get to 1.8 but if I'm using a 4 mph multiple wouldn't 18 mph put me in bracket 4 (18/4 = 4 and change).

The last example provided describes engaging an 8 mph wind with a 308 rifle at a 400 yard target and the WTF suggested dial of .8 Mils for the first shot. 400 = .4 Mils so using a 4 MPH rifle I'd need 8/4 = 2 giving me 2 x .4 Mils = .8 Mils. Is an 8 mph wind putting me in bracket 2?

I'm working with a 308/4 MPH rifle but not understanding brackets, or at least the size of brackets. If an 8 mph wind gets me bracket 2, how does a 12 mph wind get me bracket 2? And an 18 mph wind get me bracket 3?

Thanks in advance for helping this total newb!

I bought this rifle from a Remington collector and tld it was unfired, which appears to be the case as I can find no trace of carbon. It did have anel cheapo mount attached and there is just a bit of residue where I removed it. These older Remy actions are excellent and I intended to use it to build a 7 PRC but decided to go another way. $1025 to your FFL, if it needs to be shipped from my FFL $25 extra. Open to reasonable offers and trades. Black case IS NOT included

how is it,what law,what established rules let these judges and boards enable them to force the pres to spend money,hire or rehire useless bureaucrats? obvious for years that things are way out of control of the people and those they choose to manage the country.
i was hoping that Trump's election would negate the use of brute force that the left and deep state used on us since prior to and escalated during covid. looks like that was a empty thought. sad,but true "violence is the only thing that ever settles anything". once again the rule of law seems to be failing to repair >100 years of damage.
where is there to turn when all you want to do is be left alone and not subjected to perversion,theft,threats,malignant control of the state and it's abuses?

Looking for suggestions on powder and bullet weight for my k31. Any help would be great, thanks!

Selling as a package, not going to separate. Must be shipped to your FFL.

glock 32- has holster wear but other than that its in excellent condition. Also has trijicon night sights

4 magazines

200 rounds of Spear Gold Dot Duty Ammo

391 rounds of Lawman training ammo

Price is $700 shipped for everything, buyer covers any payment fees.

Brand new in box. Black, non folder w/ ARCA. R700 SA footprint. $1100 shipped.

Bartlein .284 heavy palma SS

Brand new, just sitting in my safe not getting used. Went a different route.
.284 stainless blank. #12 Heavy Palma. 1:8. 29” uncut

300 tyd

I just want to say that I had an excellent ordering experience with smoke composites.

I was having issues finding a handguard for a JP rifles barrel and gas system, so I wrote them an email to discuss fitment. I sent them links from JP with the dimensions of my components and they actually took the time to review the specs and discuss my options.

They got me all set and I just sent the money to them today. The whole process was smooth and I am super excited to work with them again in the future.

Up for sale is a pair of Oakley Sutro Sunglassess, Matte Black with Black Prizm Lenses - Brand New. Look cool while shooting matches and/or doing load development at the range!

Price: $95 $75 shipped to your door. These retail for about $150 at the Oakley store.

PayPal Friends & Family is preferred for payment to avoid fees on my end. If you want to use traditional PayPal, you'll have to cover all transaction fees (+3%). I’ll also accept Venmo or cash during a face-to-face deal if you would like to meet near Raleigh, NC.

Feel free to PM me with any questions/requests for additional photos you might have.

Thanks for checking out my listing and have a good one! S/F!