• Thanks to everyone who joined The Shot You’ll Never Forget Giveaway!

    We'll be announcing the winner early next week, keep an eye out!

    See the contest

Filter

Night Vision Newb looking for clip-on advice and info

Hello fellow Hiders, as the title suggests, I am new to the world of thermal and am looking for information and advice. Here are my main questions:

  1. I can't seem to find any sort of organized breakdown of what makes a magnified optic clip-on compatible, just that some are and some aren't. What is the criteria there?
  2. What makes a thermal clip-on compatible? Are all thermals compatible as long as the magnified optic is compatible?
  3. Being that a thermal scope is just a small screen, how does zeroing work? Do you turn off the reticle in the thermal and just use the magnified optic reticle? Do you have to re-zero through the thermal every time you put it on?
  4. Being that you are aiming at a screen, does co-witnessing mount height matter as long as the optic is zeroed to the thermal screen image?
  5. Are there magnification limits, upper and lower, and what are they based on?
  6. Feel free to offer any unsolicited advice that may be helpful.
Thanks!

Night Vision Pulsar trail 2 lrf xp50 thermal.

I'm selling my Pulsar trial 2 lrf xp50 thermal. I bought it two years ago and only been in the field once and on the range once or twice. It's become an expensive paper weight, I just don't have time for it.

Comes with a pulsar qd mount, storage bag, and everything that came with it originally. Nothing wring with it, in great condition.

Pm me your offer

Attachments

  • Pulsar_Trail_Thermal_Riflescope_Trail_2_LRF_XP50_2-16X__34801.png
    Pulsar_Trail_Thermal_Riflescope_Trail_2_LRF_XP50_2-16X__34801.png
    381.4 KB · Views: 38
  • Snapchat-118059993.jpg
    Snapchat-118059993.jpg
    220.7 KB · Views: 37

SOLD New: Timney 700 Trigger $60

This is a brand new take off zero round count trigger that came on a new rifle I purchased, right handed with bolt release. Seems to be around 3.5 lb pull weight.
Pretty sure this is it, feel free to correct me if I’m wrong…

$60 shipped
Zelle for payment

Attachments

  • IMG_6999.jpeg
    IMG_6999.jpeg
    460.6 KB · Views: 41
  • IMG_6998.jpeg
    IMG_6998.jpeg
    466.3 KB · Views: 40

Changing pin on FW Arms Auto Center Decapping Die

Hi all, checking in here with hopefully a pretty simple/dumb questions. I’m trying to change the pin on my FW Arms Auto Center Decapping Die and can’t seem to get this thing disassembled. I’ve been trying to hold it by the nut around the body and turn the nut on top, but can’t seem to get any movement without applying a ridiculous amount of force. I don’t want to go any further without being sure that’s correct, as I don’t want to break it. Is it just stuck and I should apply some PB Blaster or WD40 to it or is there any way to disassemble it? Thanks in advance!

Attachments

  • IMG_8975.jpeg
    IMG_8975.jpeg
    559.8 KB · Views: 30

Firearms WTS Custom Radian Model 1 16” with JP internals, proof barrel, DH3 trigger, full package.

Selling a lightly used custom Radian Model 1. It’s a 16” with a proof barrel, full JP internals, and a timney DH3 tigger. I will post more in depth photos over the next two days.

Round count is 320, shot strings never exceeding 10, and kept barrel temp below 120 degrees. Preferably I would like to sell it as a package with its 12 lancer mags (see parts list) and the 5.11 tactical black twin rifle bag as they were purchased for it.

Total cost before taxes was something around 4750, so given the minor scoff mark at the front of the rail (metal is fine just the Vera coat chipped) I’m thinking $3500 (was 3700 but explained price drop in latest comment) for the package as a whole, a thousand off seems fair. I will entertain reasonable offers, but I have no interest in trades.

That said, at 3700 I will pay for the insured shipping which last rifle I sold cost around 170 dollars. At the moment figure a stock model 1 is 2899-3000, and the closest to this on GB is 3999 with a cheaper trigger, cheaper stock, cheaper muzzle device/device combo, no irons, etc. this is a steal for the right person but that’s what I want.

Parts list:

Radian 14.5” builder kit/chassis
Proof Research 16” mid length 223 wylde barrel.

JP low mass bolt carrier and enhanced bolt (black)
JP adjustable gas block, and requisite Allen keys (can adjust without removing the rail). Presently tuned for black hills 77gr 5.56 to softly eject at 3 o’clock.
JP captive recoil spring, set to the h2 weight

Wilson Combat gas tube

Timney Daniel Horner 3 trigger. This is a more refined AR gold style trigger and is presently set to break at 1.25lbs. Can reset to default 2.5lbs for you and share instructions on adjusting yourself. Truly the sharpest trigger for the AR platform out there.

Magpul UBR 2.0 black
Magpul MOE K2 grip black
Magpul MVG foregrip black
Magpul 2 point QD sling

Ultradyne Flip up BUIS

Surefire Warden
Surefire Socom Muzzle Break

5x Lancer 30 round Smokey magazines
3x Lancer 30 round Red transparent magazines
4x Lancer 20 round Smokey magazines

5.11 tactical Double Rifle bag

Feel free to ask any questions, or offers. If you live in the Las Vegas area we can subtract 200 from the 3700 and handle the transfer in person.

Preferred payment methods are Zelle, navy federal to navy federal transfers, and certified funds.

Anyhow thank you for your time. Hope I can find her a good home. I would ideally like to have her sold in the next 3 weeks before my schedule gets absolutely chaotic.

Attachments

  • 0B575D83-3A2F-482E-B07E-A58979937A82.jpeg
    0B575D83-3A2F-482E-B07E-A58979937A82.jpeg
    325 KB · Views: 270
  • BB175A18-31A3-4CC4-BA99-D8BFAB0857B5.jpeg
    BB175A18-31A3-4CC4-BA99-D8BFAB0857B5.jpeg
    477.9 KB · Views: 245
  • 056B90DE-3CFF-4D75-81DD-76143B269F9B.jpeg
    056B90DE-3CFF-4D75-81DD-76143B269F9B.jpeg
    410.6 KB · Views: 214
  • AD8FE3F3-2453-4E89-95E5-7938FC80BA04.jpeg
    AD8FE3F3-2453-4E89-95E5-7938FC80BA04.jpeg
    439.9 KB · Views: 242

StaBall Match Testing - 77gr Reloads, Chasing mk262

In the quest for a Mk262 duplicate load, I am playing around with the new Wincheste, and since 8208 XBR is impossible to source StaBall Match powder. Early reports indicate that it is very temp stable (less than 0.82fps per degree of F), which is unusual for this type of powder structure.

The two guns being used for the test have the following barrels and recoil systems:

1. PRI Douglas 16" Mk12 Mod H, mid-length gas system, Geiselle 42 carbine buffer spring, and H3 buffer.

2. CLE Bartlein 18" Mk12 Mod O, rifle-length gas system, Sprinco green rifle spring, and Noveske A2 buffer.

Both guns are shot and chronographed suppressed with a Surefire RC2, with data captured on Magneto Speed V2.

The goals for this powder:
1. Fast, able to get mid 2750fps in winter temperatures

2. Temp stable, so that those of us in NH and similar states can use the same load year round without pressure issues in the summer or extreme velocity swings.

3. Easy to source, compared to something like 8208 XBR

4. Accurate is a must. I have slower Varget loads and good 8208 XBR loads that shoot 3/4 MOA out of both guns.

Bonus Goals:
1) Consistent metering, ideally to run from a Dillon 650 powder dispenser versus RCBS Chargemasters or similar

2) Low gas blowback, similar to 8208

As testing begins and continues, I will report progress here in the thread.

Attachments

  • PXL_20230304_202238050.jpg
    PXL_20230304_202238050.jpg
    475.6 KB · Views: 337
  • PXL_20230304_203629099.jpg
    PXL_20230304_203629099.jpg
    679.8 KB · Views: 338

Pin and weld suppressor?

I have an idea bouncing around in my head and wanted to get a few opinions.

My favorite rig is based on a 12.5" Criterion Hybrid barrel. Next to my "precision" rig, it's my most accurate setup. It almost seems like it goes on autopilot everytime I squeeze the trigger.

Anyway, I've never been wild about shooting suppressed, but last weekend, I got to shoot a rig with a Cobalt Kinetics suppressor on it and now, I can't get it out of my head.

What I want to do is get the direct thread model (it has an extra baffle in it), which is made of titanium and pin and weld it to my 12.5 to make 16".

Is this a mistake? When I shoot the barrel out, how ugly is it going to be removing the suppressor to put it on another barrel? I've pinned, welded and removed a lot of muzzle devices, but never a suppressor.

Reloading Equipment Auto-throw/trickler v2 + Upgrades + Area 419 Parts/Upgrades

I've been holding on to all of this but finally come to conclusion I won't be using them. All brand new and unused. Asking price listed after each item.

If you buy it all, this is the full setup for you: Auto-trickler & Auto Throw with v3 electronics upgrade + Area 419 Adjustable Base + Area 419 Auto-throw housing + the other accessories. All you need is the scale.

For any offers, please send PM. Preference will be given to anyone looking to buy the full setup. If no one wants it all then preference will be given to those buying multiple items.

Willing to do all items sold together for $575 shipped.

Zelle is preferred, USPS Money Order or Bank/Certified check are accepted as well.

Auto-Trickler V2 w/auto-throw + V3 electronics upgrade + Area 419 Auto-Throw Housing - $410
Area 419 Adjustable base - $70
Area 419 Scale Tray - $65
Area 419 Powder Cup - $60
Area 419 lid for A&D Scale - $55

IMG_7311.JPEG

IMG_7310.JPEG

IMG_7309.JPEG

IMG_7308.JPEG

IMG_7307.JPEG

New Guy from Louisiana

New to Long range shooting. Been an outdoors guy and a hunter my entire life. I have a addictive behavior, anything worth doing is not wading into the water cautiously, I normally jump in nuts deep but this time I went head first. Got into reloading, then shot my first PRS match, using a friends rifle at Vapor trails, met Tom and was hooked. On the flight home I was shopping for guns, now after a year I have 3-6GTs, I of them is my daughters. I have shot 10 matches with plans to shoot about that many this year. This community has been great and I look forward to many new relationships.
  • Like
Reactions: DukeDuck

Firearms RARE SAN 511 Precision Rifle .50 BMG with 1 of 1 B&T Suppressor

IMG_8421 Small.jpeg
IMG_8422 Small.jpeg
IMG_8423 Small.jpeg
IMG_8424 Small.jpeg
IMG_8425 Small.jpeg
IMG_8426 Small.jpeg
IMG_8427 Small.jpeg
IMG_8428 Small.jpeg
IMG_8429 Small.jpeg
IMG_8430 Small.jpeg

$20,000

Incredibly rare SAN 511 Rifle, serial number 34 - Less than 10 of these in the US! Comes with reflex style 1 of 1 B&T USA made 3D printed suppressor.

SAN 511 sniper / anti-materiel rifle is an improved version of the OM Nemesis rifle, which was developed by Swiss company AMSD several years ago. All manufacturing rights and documentation for Nemesis were sold by AMSD to SAN Swiss Arms AG (former SIG Arms factory, now member of international SIG SAUER group) in 2010.

SAN 511 sniper / anti-materiel rifle is manually operated, rotary bolt action weapon. It is built around aluminum alloy receiver, which is possible due to bolt locking directly to the barrel extension. Precision made barrel is free floated and equipped with muzzle brake and/or optional sound suppressor (silencer). Rifle has extended Picatinny rails for both top and side mounting accessories. Rifle is fed from detachable box magazines with 5-round capacity and also has mag insert for single feed loading. Side-folding shoulder stock can be easily adjusted to user preferences, and is fitted with adjustable, folding rear support leg. Folding adjustable bipod is attached to the forend, and rifle can be fired either from ground or other support (for maximum accuracy) or off the shoulder (in emergency situations). Sighting means are provided by telescope or night sights, installed by the user onto integral Picatinny rail, running at the top of the receiver. Additional accessory rails are provided on both sides of the receiver.

Comes with everything pictured, including the following:

Like New SAN 511 Rifle with Muzzle Brake (20 rounds fired through it)

Bore snake, cleaning brushes, cleaning rod (not pictured), and jag

1 of 1 B&T Suppressor (Brand new, unfired)

Allen key set

Swiss Arms bullet drop table

One piece 34MM QD scope mount

50 BMG Snap Cap Training Bullet

Cases for both the rifle and suppressor

Bolt Disassembly Tool

CAA Grip and grip/palm swell panels (Not Pictured)
  • Like
Reactions: smoooth1 and RC556

So you Vape or know someone who does? Stop now, its poison.

It's poison and the ones selling it know.

The Lessons of Popcorn Lung: Inhale With Caution​

Amy-Sarah Marshall8/23/2019General Health
facebook sharing button

twitter sharing button

email sharing button

linkedin sharing button

pinterest sharing button

popcorn lung disease
Popcorn lung sounds deceptively silly. The condition actually has no cure.
August 23, 2019 update: An alert issued by the Blue Ridge Poison Center and the U.S. Centers for Disease Control and Prevention (CDC) on August 21 reveals that vaping has started to have real consequences. The report notes that vaping has recently resulted in 100 cases of people going to the emergency room with serious lung illness and life-threatening symptoms. Clearly, as vaping becomes more popular, these kinds of concerns will only increase. The story of popcorn lung illustrates why.

TOO MUCH OF A GOOD THING​

Can we ever have too much of a good thing? For hundreds of years, authors like Cervantes, Shakespeare and Twain have all weighed the question. Philosophically, we may continue to wonder. But when it comes to popcorn lung, I’ve come to conclude that the answer is a definite YES.

THE POPCORN LUNG STORY​

It sounds like an urban myth. But this story actually happened. “This guy loved popcorn,” says pulmonologist Catherine Bonham, MD. “He made microwave popcorn every day, about two times a day, and when he opened the bag he would inhale the popcorn smell because he loved it so much.” The diagnosis for his lung issues couldn’t have been more fitting: This popcorn-lover had contracted popcorn lung.
This patient’s fate doesn’t mean you should never eat microwave popcorn again. Lung doctors Bonham and Tessy Paul, MD, sat down with me to explain the true lesson of the popcorn lung story. There is something to be said for moderation in all things — especially when we’re talking about our lungs and what we breathe into them on a daily basis.

POPCORN LUNG POPPING UP​

But let’s back up. In 2000, in Jasper, Missouri, a local doctor had eight patients with breathing problems. Biopsies showed that all of these workers had bronchiolitis obliterans, a very specific and fairly rare lung disease.
The doctor noticed a pattern. Every single one of these patients worked at a local factory that produced microwave popcorn flavoring. And each of them were exposed on a daily basis to the flavoring mixture itself. All eight had worked there for many years.
These clues — and the fact that four of those initial eight patients required lung transplants — led to an investigation by the National Institute for Occupational Safety and Health (NIOSH). Bonham says they found that “half of the workers had some kind of lung problems, like asthma or bronchitis.”
But none of the workers had linked their conditions to their work environment. “Most of the time, when we think of occupational illness, we think of a one-time, really high-level exposure to something inhaled,” Bonham explains. “But in this case, the workers were inhaling this butter flavor over a longer period of time. So they weren’t associating their symptoms with being exposed at work.”
As Paul puts it, “They didn’t go home and have symptoms right away. It was just exposure over time.”

A TOXIC FLAVOR​

The investigators of NIOSH “sampled the environment and what the workers were breathing and found 100 volatile compounds.” Predominant among them: diacetyl, a buttery-tasting chemical.
The findings fingered diacetyl as the culprit at the root of the problem. When heated and inhaled over long periods of time, airway damage results. Inflammation in the lungs leads to a buildup of scar tissue that blocks and destroys airways. This damage, bronchiolitis obliterans, became known as popcorn lung.
Further investigations throughout the 2000s revealed that diacetyl occurs both in artificial and natural processes. Coffee roasting, for instance, produces the compound, whether or not the artificial flavor has been added. You can also find diacetyl in dairy products, candy, wine, beer and chocolate.
But the story doesn’t just tell us to remove diacetyl to make everything better. Paul explains that microwave popcorn manufacturers tried “substituting with another compound. But they found out the substitutions were just as bad.”
Bonham nods: “The take-home point is that exposing yourself to large amounts of chemicals, artificial or natural, doesn’t matter. Your lungs don’t know what to do with these aerosols when you’re breathing them every day, all day.”

THE EFFECTS OF POPCORN LUNG​

The effects of popcorn lung are irreversible.
Bronchiolitis obliterans, a type of interstitial lung disease, literally “obliterates” or destroys the small airways in your lungs. Scar tissue builds up and blocks the air, making it harder for you to breathe. While some medications can slow this scar build-up, no treatment can remove the scars.
“It’s amazing to look at some of these biopsies under the microscope,” Paul notes. “With popcorn lung, we can see airways narrowed down or completely obliterated. It’s amazing how much damage you can cause.”

THE DANGERS OF E-CIGS AND INHALING OVER TIME​

Accumulation over time: This, not diacetyl, is the real cause of diseases like this. Not only does the damage occur to the lungs, but the slow progression undermines health providers’ ability to diagnose and warn people about the damage.
Bonham points to the rise of vaping as a prime example of this difficulty. “Lung doctors are so concerned about flavored e-cigarettes because they have these compounds, and we don’t know what they do. But we know from our experience with popcorn lung that some damage is being done. It might be damage that’s more low-level now, but as there’s an accumulation over time, it could be causing a serious health problem.”
Bonham notes that the story of popcorn lung should caution users of new products like e-cigarettes against trusting too much in safety claims made by companies. She points out that, like with the tobacco industry, manufacturers have no economic incentive to make the health risks of their products public.
With popcorn lung: “The companies had done their own testing on these chemicals, and they knew before 1993 that it killed the rats they exposed to it in the lab. But since it was private research, it wasn’t made public. They also had had leadership meetings talking about how to protect workers from flavoring compounds even before reports of popcorn lung came out. So, they knew it would come to be a problem or might be something they’d need to pay attention to, but there’s an economic incentive for companies not to make that kind of information public knowledge or let us know that this could be a problem.”*

QUESTIONING THE MARKETING OF E-CIGARETTES & VAPING​

“It’s really unfortunate, because a lot of these products are being marketed or tailored to really young people,” Paul says. “Teenagers, even middle school kids are using these products with bubble gum flavors or cinnamon flavors. These are not geared towards adults. Knowing that these kids at such a young age are being exposed is really disheartening. Who knows what we’ll be seeing ten years from now?”

THE SYMPTOMS OF POPCORN LUNG​

Your primary care provider should note symptoms like:
  • Short of breath
  • Crackles (“sounds like Velcro or Rice Crispies”) detected with a stethoscope
  • Cough that doesn’t go away
  • Oxygen levels that nosedive when walking
Bonham agrees. “Some of these informational videos about flavoring and diacetyl and cigarettes characterize vaping as a fun hobby, with cartoon animations.” Her conclusion? E-cigarette marketing isn’t “targeted towards adults trying to quit tobacco. It’s trying to get a new generation smoking.”

The Claims of Ingredient Safety​

Bonham notes that some online sources suggest that “without diacetyl in e-cigarettes, they’re harmless.” This claim doesn’t reveal the other nature of the other ingredients in vapors and flavoring, however.
For instance, Bonham points out that the chemical that creates the vapor in e-cigarettes and produces the white puff of smoke is polyethylene glycol— colonoscopy preparation solution.
“Think about coating your lungs with colon prep,” she says. “I think intuitively that’s a terrible idea.”
Bonham notes that some manufacturers have employed the ingredient-switching strategy in response to critique of polyethylene glycol, using propylene glycol as a substitute. “Some pro-vaping bloggers discuss that propylene is somehow safe to inhale. Another use of propylene glycol? Airplane de-icer.” And Bonham adds, like any other chemical additive, “Repeated exposures over time are likely to cause lasting lung disease in susceptible people.”

PROBLEMS BREATHING?​

Bronchiolitis obliterans is a type of lung condition called pulmonary fibrosis. Get tested for this lung disease right away.

The Supposed Safe Levels​

When it comes to inhaling compounds, Bonham says, we’ve learned that “what’s a safe level for one person might not be a safe level for another person. Some people are more susceptible than others are.”
Exposing yourself to anything over time, she says, because studies haven’t found anything harmful in the substance, is “naïve. You’re being experimental — on yourself.”

Accessories Dope Card Holder - Picatinny, Optic Mounted and SPUHR

New D.O.P.E Card Holder​

$30 + Shipping​


This design allows for a sleek and repeatable way to display your D.O.P.E. and other info on your rifle at eye level. Detents hold it open or closed. The interchangeable cards allow for quick and easy swaps between stages or engagements, and they can mount top or bottom.

Cards work with dry erase, wet erase or Sharpie markers to provide options for every environment. Sharpie can be removed with a damp Magic Eraser/melamine sponge.

Website - DOPE Card Holder


*Recently added SPUHR Mounted option*


DCH - 1.png


DCH - 2.png


DCH - 3.png


OpticMounted - 2.jpg


OpticMounted.jpg


RailMounted.jpg


RailMounted - Folded.jpg


ScopeMounted DCH - 1.png




SPUHR Mounted DCH


SpuhrDCH - 1.png


SpuhrDCH - 2.png


SpuhrDCH - 3.png

Attachments

  • ScopeMounted DCH - 2.png
    ScopeMounted DCH - 2.png
    1.3 MB · Views: 958