I have an excellent condition foundation Samson stock for sale. It is inlet for a short action/ right hand impact 737r action. It comes with the full weight kit and a custom made cheek piece and the original. The arca rail and side rails are solid brass. This is inlet for Hawkins bottom metal but it is not included. The grip is the genesis 2.

Selling for $1750 shipped

Please text for fastest response at 636-297-5055

Thanks!
Ben

I have three 6-9" Harris bipods with picatinny attachments and Short Action Precision tension levers on them. They are the "S-BRP"s, where the smooth legs are sprung inwards, and held in place w/ the tension knobs. 95 shipped paypal f&f only.
This is about a 40 dollar savings from buying new. I used these very little as I prefer my other harris sbrp where the legs spring out.
These are nice and light weight, lock up pretty tight, and take up little room in the rifle bag.

No trades, and paypal f&f preferred.

These rifles are pure trash. Against my better judgement I bought a new B14 Sierra Wilderness in 7PRC after already having been burned 2 times by rifles of theirs that shot like crap out of the box (including a premier).

The first trip to the range right out of the box it was shooting roughly 4-6” groups with all three types of Hornady factory ammo. I started with a barrel that I had cleaned at home prior to the range trip and did a break in since factory barrels are known to be rough. Even during the break in and cleaning the barrel frequently the groups were a whole hell of a lot larger than you’d ever expect to see.

Everything was checked for torque, I pulled that optic off of the rifle and put it on my PH2 6.5CM and confirmed there wasn’t an issue with it and put the optic from my PH2 on the Bergara with the same result. Also tried different torque settings on the action screws other than their 55inlbs spec going to 65 on both and also lightening the rear. I also pulled the barreled action out of the chassis where I saw a lot of heavy overspray from their panting process and proceeded to sand the thick webbing spots down at the range. Nothing I did changed the result.

After 60 rounds the rifle was still shooting like absolute dog shit and copper fouling like crazy. I called Bergara on the way home from the range and got an RMA to send it in.

At home I inspected the rifle where I noticed the absolute terrible bolt lug contact and thought that might be causing an issue as well so I noted that when I sent it in.

Bergara inspected the rifle, recrowned it and said it shot a .9” and .6” group with Terminal Ascent 170gr and sent it back out. They didn’t address the bolt lug contact issue or the issue with the hinge pin on the floorplate of the bottom metal falling out of one side of the hinge due to the pin either being too short or the relief being too wide and their “gunsmith” said was in spec.

I was hopeful it would shoot as I do generally like the rifle and it has improved but it still shoots like complete ass. I even bedded the stock since it was showing signs of a bedding issue and Bergara fucked up the paint in the inlet while they had it which uncovered how uneven and thick the paint was in places. The bedding seemed to have made a difference because the erratic flyers are gone and it’s just shooting large triangle type 3 shot groups now… for the most part.

I got frustrated at the range after group after group being 1.5-2MOA with every ammo type include the Terminal Ascent they recommended for another 50-60 rounds or so. I had cleaned the copper mine yet again with bore tech eliminator which is quite the process due to how badly it fouls and decided I was just going to put some rounds through it to try to smooth it out in 10 round strings. So I shot the first two 3 shot groups back to back and they were… large. Loaded up another 3 and it stacked them sub .5moa… no shit. So I shot a 4th and it put it right in there. At this point I’m thinking this thing is starting to shoot and get excited. I shot another 3 shot group with the barrel super hot with was also very good.

So I let it cool completely and shot another 3 shot group… back to dog shit. WTF? I cleaned it again and shot two more 3 shot groups with the same result. I was done wasting ammo so I put it away. I was thinking the barrel might have a stress relieving issue based on this and texted another hide member what had happened and he said the same thing.

I also brought my Seekins Element 7mm PRC to the range and shot them side by side and all of the ammo shot exceptional in the Seekins, so I know it’s not an issue with the ammo or an issue with recoil. Despite the Seekins being nearly 3lbs lighter as configured it still didn’t manage a group larger than 3/4moa, even the 8 shot group I fired in 1.5min trying to mimic barrel heat over a NRLH stage.

So here we are yet again, I called Bergara again and they said they’ll issue another RMA and look at it again but won’t test fire it. I feel like that’s a waste of my time when I’ve already gone down that road with negative results so I have zero faith in a positive outcome from that nor do I wish to waste any more time or ammo verifying the rifle when it comes back. I proposed that they either 1. Accept the rifle back and issue a full refund of my purchase price or 2. Agree to rebarrel the rifle so that I can send it down the road with some level of confidence that whoever bought it might get a decent rifle. They denied both.

I’ve followed up with the same documentation of my results in an email as well as my proposal. I doubt anything will come of it so my next step will be to send it to a gunsmith next week for a third party evaluation and I’ll then just take legal action and seek the cost of the rifle, inspection fees, as well as the ammo I’ve wasted on this piece of crap.

So my advice, buy a rifle from just about any other rifle manufacturer.

I’ll update this later tonight or tomorrow with some pictures as well as update it with third party findings or any resolution from Bergara.

(2) Pro Knot Heavy Duty Waterproof Cards (both the same, zoom in to see the knots - one if front side and one is backside)
UCO Titan Waterproof Match Case (no matches)
Orange Zippo (no fuel in it, will need to add obviously)
Zippo Flints (in package)
Zippo Wick (in package)
Leatherman Tool Pouch (Black, attaches to molle)
MSR Light My Fire Flint / Steel
Figure 9 Carabiner
(8) Total Repair Buckles, these are from ULA Equipment, see pics - basically all but the (2) larger buckles are "split" and do not need to be "weaved" to put on.

$40.00 TYD USPS Priority Small Flat Rate Box. PayPal friends and family with no note or add 4% for fees.

Samson Manufacturing 3.5x Magnifier
Like new condition
Includes flip to side QD mount
$250 PPFF or Venmo
Add 4% for PP G&S
Here’s a link with info on it.

$625 shipped insured. PPFF or Venmo. No trades.
Athlon Helos BTR Gen 2. 6-24 x 50. Illuminated MIL APRS6. Includes box, papers, caps and everything it came with.
Like new. Has been mounted. Rings, caps, throw lever NOT included.
Here’s a link but out of stock as are all the other Helos. These have incredible glass for this price point. I’m replacing this with a Cronus G2. I still own the 4-20 and 2-12. Both great scopes as well.

Looking for a 2 Stage Geissele Super 700 Trigger right handed safety version.

Cash in hand.

*****FOUND*****

This was from factory Berger 223 ammo. Been sitting on it for a few years. Time to let it get some use from someone.

101 pieces. $65 shipped

did my Faux K98 today , pretty busy week so doubtful i will get to sight it in this week , the scope and rings separate very smooth and reattach very nicely so i see that as a indicator its good , also sighting irons through the witness holes everything looks centered , scope is a period Oigee , 3 post reticle ,single turret

the rifle itself was a bad buy like 3 decades ago , bought at a gun show and i was new to collecting and it ended up being a bubba renumber , never felt right to sell it so i kept it , great bore and a good shooter , so i did not feel bad about using it for a faux sniper project

shame was its a 1915 Danzig Gewehr 98 that had been converted to K98 configuration so by all rights was quite collectable before bubba did his creative serial number work on it even if it were mismatched , he didnt have to do it

Hey fellas, any recommendations for reputable riflesmith to pin a rail onto a M700 LA or SA?

Thanks!

I recently just completed a Aero M5 18 inch in .308. Aero ultralight canter mount (I get really good discounts on Aero stuff) and bough a Vortex Strike Eagle 4-24x50. I didn't want to break the bank on a scope that I wasn't going to be really reaching out and frankly, its probably too much scope for the rifle, but I digress. I am looking for recommendations for flip caps that weren't the normal Vortex , I will charge you your first born for some plastic, brand of mounts. I know there has to be some great ones out there that aren't $59 for the objective alone. Any thoughts or suggestions?

Sig Romeo X enclosed compact circle dot reticle. Brand new never used or mounted. SORX1400 part number

$400 shipped

PayPal FF, Venmo or Zelle

2000's serial numer RimX 30MOA rail
MDT Elite Chassis with rubber dampners
Trigger Tech Diamond trigger
20" Bartlein M24 16 twist threaded 1/2x28
Manzella Precision
22lr Match Eachus Chamber

This gun is a hammer with CenterX and all SK brands
I picked up a 1727F, so I am selling off a few rifles

$3350 shipped to your FFL

Really appreciate everyone turning out, there were a ton of great submissions in there! We went through and picked a winning Supporter completely randomly, so the winner is @jrhtx !

If you'd like to see all of the submissions, check out the thread here

Keep an eye out too, the next challenge will come in a couple weeks. If you want the chance to win some free Hide merch, make sure you become a Supporter here for the chance to win!

16" barrel, 1/2x28 threads, mid-length gas system 0.750 (standard) gas block and a .223 Wylde chambering (for those unfamiliar this is an optimized chambering for .223/5.56 – will shoot both) Ordered by me from Compass Lake Engineering, but never used or mounted to a rifle. Still has the sleeve and rubber nose for the threads.
$550 OBO. Zelle or MO. Thanks.

Whats the difference between the MPA comp and LE chassis? Im not seeing anything.

Also are all mpa chassis still ambidextrious? Ive had trigger issues with the exposed hole…

1.McMillan A3-5, hydrodipped black multicam, inletted for a Remington 700 long action, the factory rem bdl floor plate, and the factory rem varmint barrel contour. $675 shipped
2.McMillan A5 fixed comb blue and black Remington 700 Long action, M5 inlet, and the factory Remington sendero barrel contour 550 shipped
3.4.5. A4s (1camo) 1 painted OD green and 1 or 2 usmc that have cheek saddles MTU M5 850 shipped
6.Black short action fully adjustable a5 mtu barrel contour m5 cut... 850 shipped
7.Painted FDE short action MTU M5 a5 850 shipped
9.Short A5 fully adjustable painted urban transition M5 MTU 850 shipped
10.Short a5 fully adjustable molded desert specter M5 MTU 900 shipped
11.Short M5 Remington varmint a3-5. 725 shipped
13. A5 short action m5 rem varmint with cheek saddles 625 shipped
14. 15. Painted U10 molded U1 both 1050 shipped each
16.Fully adjustable A5, short action 700, m5 inlet, factory Remington varmint barrel channel, painted desert transition, aluminum pillars installed
I did my best to post pictures in order. PLEASE allow me a decent amount of time to get these shipped. All brand new in box, painted unless stated they're molded PPFF money order, or venmo

$840 shipped. Bought new in 2024. No trades

I have a like new, never taken out of garage, 322c tripod. It's nice and sturdy i just decided to go a different route. Has an arca mount also. I have original shipping box and bag it came in.
$325 shipped PP F&F. No trades
Video call to be had with buyer.

#1 New McMillan Hunters Edge Sendero, short action remington 700, BDL, pillars and 1 stud, proof sendero contour, tan with speckle, 28oz, 625 shipped

#2 New McMillan Hunters Edge Sendero, long action remington 700, BDL, pillars and studs, proof sendero contour, tan with speckle, 27oz, 625 shipped

#3 New McMillan HTG, remington 700 long action, BDL, pillars and studs, remington sendero contour, olive, 35oz, 625 shipped.

#4 New McMillan HTG, remington 700 short action, BDL, pillars and studs, remington sendero contour, black, 35oz, 625 shipped

WTS Like new ZCO 527 Mil Scope. This one has the MPCT3 reticle and 15 mil locking turrets. Only mounted on rifle…never used or fired. Includes box, all original accessories, Scope caps, Scope Chaps and threaded covers. Comes with Spuhr 6001 and accessory rail. Asking $3400 shipped.

Will require phone conversation prior to sale to avoid scam concerns for myself and buyer. Please PM with questions or for more details.

I ordered this directly from JDI, the current importer. It is a safe queen, and I have literally put 20 rounds on it.

Comes with everything you see in the picture. The stock is Swiss. If you are serious about purchasing PM me.

551p 16” barrel (barrel is finished at 16” with integrated flash hider)
B&t top rail
B&t hand guard
Factory handguard
2x 30 round magazines (gun only came with one)
The case (cheap case but not pictured)

$5,000 plus shipping FFL to FFL

#1 New McMillan Game Scout, remington 700 short action, BDL, pillars and studs, magnum sporter contour, olive with black/tan speckle, 35oz, 625 shipped.

#2 New McMillan Game Scout, remington 700 short action, BDL, pillars and studs, magnum sporter contour, olive with black/tan speckle, 34oz, 625 shipped.

#3 New McMillan Game Scout, remington 700 long action, BDL, pillars and studs, magnum sporter contour, kryptek camo, 35oz, 625 shipped.

#4 New McMillan Game Scout, remington 700 long action, BDL, pillars and studs, magnum sporter contour, kryptek camo, 35oz, 625 shipped.

#5 New McMillan Game Scout, remington 700 long action, BDL, pillars and studs, magnum sporter contour, olive with black speckle, 35oz, 625 shipped.

#6 New McMillan Game Scout, remington 700 long action, BDL, pillars and studs, magnum sporter contour, olive with black/tan speckle, 34oz, 625 shipped.

#7 New McMillan Game Scout, remington 700 long action, BDL, pillars and studs, magnum sporter contour, black with black/gray speckle, 29oz, 625 shipped.

#8 New McMillan Game Scout, remington 700 long action, BDL, pillars and studs, magnum sporter contour, black with black speckle, 30oz, 625 shipped.

#9 New McMillan Game Scout, remington 700 long action, BDL, pillars and studs, magnum sporter contour, tan with black speckle, 30oz, 625 shipped

Top to bottom

#1 New McMillan Game Scout, Browning X Bolt, factory DBM, short action, pillars, rail and 1 flush cup, magnum sporter contour, ambush, 29oz, 625 shipped SOLD

#2 New McMillan Game Scout, Browning X Bolt, factory DBM, long action, pillars, rail and 1 flush cup, magnum sporter contour, ambush, 30oz, 625 shipped SOLD

#3 New McMillan Game Scout, Browning X Bolt, factory DBM, long action, pillars, rail and 1 flush cup, magnum sporter contour, ambush, 30oz, 625 shipped SOLD

#4 New McMillan A3-5 adjustable comb, Browning X Bolt, factory DBM, short action, pillars, rail and 1 flush cup, magnum sporter contour, transition, 47oz, 675 shipped

#5 New McMillan Game Scout Adjustable Comb, Browning X Bolt, factory DBM, short action, pillars, 1 stud and 2 flush cup, magnum sporter contour, olive with black/tan speckle, 43oz, 675 shipped SOLD

#6 New McMillan Game Scout Adjustable Comb, Browning X Bolt, factory DBM, short action, pillars, rail and 1 flush cup, magnum sporter contour, transition, 42oz, 675 shipped

#7 New McMillan Game Scout Adjustable Comb, Browning X Bolt, factory DBM, short action, pillars, rail and 1 flush cup, magnum sporter contour, transition, 43oz, 675 shipped

#8 New McMillan Game Scout Adjustable Comb, Browning X Bolt, factory DBM, short action, pillars, 1 stud and 2 flush cup, magnum sporter contour, black with black/tan speckle, 44oz, 675 shipped

20moa 1.375 30mm Unimount. light coat of krylon. includes plain scope cap as well.

RAP SOLD.

$125 shipped for unimount only.