Looking for a foundation revelation (light) for a lone peak short action. Color does not matter.

Bergara B14 HMR 20” 308 in MDT ESS chassis, comes with folding stock, multiple forend options including full top pic rail an open mlok forend, MPA pistol grip, and a closed mlok forend. Additionally comes with two optics rails, low and high for the full rail, both 20moa, arca forend plate, bag rider, 2 round side saddle, and upgraded cheek riser. DOES NOT INCLUDE optic or muzzle device since everyone uses their own preferred suppressor mounting system. It’s a 3/4 MOA rifle with GGG 175s and also shot federal GMM very well. Asking $2000 or trade for a NF ATACR 4-16x42 or terminus Zeus SA with magnum bolt face plus cash

NEW!
Pricey!!!
New large magazine to emulate centerfire magazines.
I guess people wanted the larger mag in Europe? or they don't have access to AI stocks?
So is Anschutz NA going to sell the 1727 APR or just continue with the AI platform?
-Richard

I'm relatively new to the A&D world. I bought this FX-300i back in the fall. it has been an amazing scale and I have throughly enjoyed using it!

I have only one question: the power button on my unit is much "softer" than the other buttons on the scale. To the point where it is a little tricky to turn the scale on and off, while the other buttons are very tactile and pleasant to use.

This is a video of what I'm talking about:
Login to view embedded media
I was wondering if anyone else has experienced anything similar, if it is just me etc... Like I said in the video, I don't really care, but I also don't want to have issues later!

3 x 15 round steel Beretta M9 Mags used but fully functional. These were my service mags. No use for them as I don't own a Beretta that accepts them.

$25 for all 3 + free shipping

Paypal or Venmo

New unused not in origional packaging. This is a military issued switch not an airsoft knockoff. Has hook and loop adhesive for easy setup.

$40 OBO

Paypal or Venmo accepted

Used, but not abused. Purchased brand new directly from Nightforce - in excellent condition and does not have any mechanical or optical defects. The lenses may show signs of light dust in the photos, but they are scratch free. Never painted. Original boxes and all accessories you would receive with a new optic are included.

Selling to move up to a ZCO.

Shipping is included in the price - insurance coverage is optional at the buyers' expense.

Zelle (Preferred) - Venmo - PayPal FF accepted - Not looking for any trades.

1. Nightforce ATACR 5-25x56 F1 MIL-XT (C616) - $SOLD

In excellent condition, with original packaging. No loctite used on screws. Never painted.


1. Nightforce 34mm Ultralite 4 screw Rings - 1.125" High (A224) - $SOLD

Have a few of these. Hoptic 2 round quiver. I believe they are 308/6.5 but not 100%.

$sold shipped each.

Like brand new, never used in a match

7-35X56 mil XT NF ATACR sitting in a Gray Ops 1.25” Tall 1 piece mount. Still have original box that it will ship in

Pictures will be posted later tonight.

Looking for $2850

I know this is a reloading forum, but most non-reloaders won’t know what I’m talking about.

New 6.5creed barrel is hitting the lands at 2.792” with the 140gr smk. This seems short, but may be in spec (not sure what spec is)? Anyone else have to seat these bullets below 2.800?

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

Wilcox G24 Mount, FDE, Like new. It was for my PVS 14 and have not used it since I got binos. - SOLD
The box is not the box for that mount. It is for my other one.

All Items are up for grabs. First person to claim item on the post takes it. All items are shipped lower 48

Leupold Field Clamp - $40 SOLD
(3) Plastic AICS Mags (1 MDT 10 Rnd & 2 Magpul 10 Rnd) - $75SOLD
(3) MDT Metal 12 Round BR/Dasher Mags - $150 SOLD
34MM Vortex Cantilever Mount 1.4355" Tall - $75.00
New Out of the Box 36MM Area 419 Rings 32mm Tall (1.25") - $200.00
Used 36MM Hawkins Rings w. Diving Board 1.15" Tall - $150.00
Sphur 6601 - $200.00 SOLD

Ready for competition Vudoo V22s single shot, just add your scope and tuner of choice. This vudoo has a Mullerworks 8 grove barrel. This barrel was selected from batch of barrels that where air gauged and slugged. This barrel tested the best and was cut with a Winchester 52 chamber. This barrel is very ammo tolerate. It shoots Eley and Lapua ammo very well. I have won matches with both Eley and Lapua ammo. The trigger is a Bix and Andy, and the stock is from Randy Owens with a custom butt plate. This rifle will also come with a second barrel, it’s a Shilen Select Match Ratchet 4 grove cut by David Lott at Di Precision in Texas. I will include a bore guide, additional springs that the rifle came with an action wrench and Lowey bolt protector. If your local to Florida or coming to Florida, I will make available for sale a case of Eley Tenex Lot 1077. This lot is no longer available as I bought it all since it shot so well in this rifle and my other rifles, it’s my main match ammo. This ammo was purchased from Whidden Gunworks after lot testing in theirt Tunnel. This ammo has produced match wins and shoot very well in this rifle. Rifle will come in Pelican hard case.

Total cost of this rifle setup comes in at about 5K.

$3700 shipped including both barrels to your FFL in the lower 48 states

$3200 for Vudoo with the MullerWorks 8 grove barrel already installed.

I wanted something different, something to fill a niche, but did I go too short?
I cut my heavy profile Ruger American Hunter barrel down to 14.5" and pin and welded a Wardin Surefire blast diffuser.
I wanted to build a tactical "Urban Sniper".
The heavy barrel allows for multiple follow up shots, the blast diffuser keeps the concussion forward and dust signature down, and the shorter length was to make it more handy and also more rigid..
But, then I see that most police Snipers use a 24" barrel.... from my understanding, police snipers would rarely setup for a shot past 300 yards, so why do they need all that barrel?
With my 168gr Hornady ELD-M handloads, I'm getting just over 2500 fps at the muzzle with 45.3gr of Varget..... single digit SD's... (over max- don't copy or be careful!)
At 600 yards, it's still tracking at 1550 fps (dialing 5 mils elevation).
Is that too much drop at 600 yards? (Approx 9')
Does 1550 fps seem like enough velocity to still be effective up to 600 yards? Energy at 600 yards is calculated at 980 ft-lbs....
At the 600 yard range/ windy conditions, I was getting sub MOA. At 300 yards, before the wind picked up, I managed .4 MOA....
At the 100 yard range, it's always sub MOA, a few times I got 1/2 MOA... 1/2 MOA takes a lot of patience, concentration and calmness between shots .... sub MOA comes rather easily....
Thanks in advance for your feedback.

Bezos has finally decided that he wants a divorce from his nasty plastic catfish…. She is old and looks like she belongs in the bar scene from Star Wars.

But Bezos doesn’t want to give her a hundred billion.

So load her and Katy Perry and some CBS hose hound into a penis rocket… and it blows up in the stratosphere. Bonus points if you took out an insurance policy…

The public cheers the fact that Katy Perry has been turned into fish food… the press spends all their time making some tier-two reporter into a martyr of space travel…

And Bezos picks up a hot 25-year old who hasn’t spent her life getting Bondo and tuck treatments at the local Earl Scheib. And can suck start a Harley.

I mean… this makes way more sense to me than launching Josie and the Pussycats into space, right?

Who has a better theory?

Who wants to bet maple syrup that the rocket turns into an aluminum shower and ends up in a geo-stationary sub-aqueous orbit off Florida??? Takers?

Ba hahahah… Bezos is an evil genius. Oh, wait… I thought of it.

Ok… Off to start hollowing out my mountain and figuring out how to put laser beams on cats heads!

Sirhr

I can’t justify anymore firearms so it’s time to move on. I much prefer LR /prone shooting and really have no interest in helmet mounted NV. I wanted a device that could AT LEAST stand up to 338 Lapua, but 50BMG is preferred. I really liked the E3 Harris CNVD LR, but it’s only rated to 308. I found that the Eotech ClipNV LR is not only good to 20x mag, but also 50 cal rated. Anyone know of a better (maybe even better priced unit) or a reason I should not go with this unit? Price is not a huge concern. This is a buy once cry once purchase. Also I would like to be able to shoot as far as possible. Would adding a MAWL extend its range? This will see use primarily on my MRAD, Barrett M82, and 18” 6.5 Grendel. It will be a couple months (at least I’m trying to wait at least that long) before I purchase this to gather as much info as possible. I appreciate any insight!

New Gen 3 little bastard muzzle brake $125 .

I made a recording for these people. I answer the phone, let em get to the point then say, "Hold one a moment..." and push play, what they hear next is...


"Who are you? How'd you get in here? No! Wait!! Don't shoot!


BANG BANG BANG BANG BANG BANG


Wheezing, big exhale, footsteps getting louder...then I hang up the phone.

I built this rifle to be a lightweight, mid range hunter, stalk and carry do it all under 400 yards hunting rifle. After building the gun I lost access to the hunting land and have never been hunting since.

Specs
Defiance Stryker Ridge HTR Action (Rebel)
308 Lilja #4 contour barrel 16.5” 1-10 twist
Trigger Tech Special 2-stage curved
Gunwerks Magnus stock
Gunwerks bottom metal
Bedded
Work done by Jack Keister Custom in Harrisonburg, VA

This setup with suppressor (not included) and Nightforce NSX 2.5-10 (not included) were 9.5#s.

I have an extra lilja barrel blank in 6.5. 1-8 twist to go with the rifle.

$3000

Shoots very small groups and has less than 100 rounds of 175smk on the barrel.

Clean out Sale


Rings:


Talley Model 7 medium 1” $25 shipped

Talley Kimber 84 1” medium $25 shipped

Talley Kimber 84 34mm with anti-cant top ring, $30 shipped

1” weaver/pic rail rings, all three $25 shipped


A. Burris Medium Zee


B. UNK steel mark 4 style, high


C. UNK low rings



Barrels:


Lilja 1:7.5, 6mm #2 contour, blank $375 shipped spf


Kimber Montana 30-06 factory take off, unknown rd count $50 shipped


Unknown brand radial muzzle break, no notes on thread pitch but for sporter profile barrel, needs to be installed/finished by smith. $25 shipped




Actions/Bottom Metals


Model 7, standard bolt face, factory trigger and bdl bottom metal, matte finish, recoil lug, 3 scope mounting holes. $625 shipped to FFL


PTG Rem 700 LA BDL bottom metal, spring, follower and two mag boxes. New never used. $175 shipped SPF


Rem 700 ADL trigger guard, used. $35 shipped

I put together a MK12 Mod 0ish upper. I like my mod 1 better so never used this. Build as follows, 0 rounds on it. Asking $1200 shipped.

-GREY GHOST PRECISION FORGED UPPER RECEIVER
-BCM FORWARD ASSIST
-BCM DUST COVER
-BALLISTIC ADVANTAGE PREMIUM 18” SPR BARREL 1:8 223 WYLDE
-PRI GEN 3 MK12 MOD 0 HANDGUARD
-PRI GEN 3 MK12 MOD 0 SEAN SLEEVE
-PRI FLIP UP FRONT GAS BLOCK
-PRI M84 GAS BUSTER CHARGING HANDLE
-CRYPTIC COATINGS MIL-SPEC BCG
-DEAD AIR KEYMO MUZZLE BRAKE

Have some Tikka parts I’d like to sell:

1. Tikka RH Single Stage Trigger - $90
2. Tikka RH Single Stage Trigger - $90
3. Tikka Varmint Stock - $90
4. Tikka CTR Stock - $90
5. Tikka CTR Bottom Metal -$90

I have a PVS-14 with Ebit White Phosphor Tube high FOM 2835. Excellent condition and still under warranty until June of 2027. I do have a hard case for it.

Spec sheet included. $2600 shipped.

I’m not looking for any trades.

Let me know if you have any questions.

Remington .30-30 Win 150gr Core-Lokt Soft Point R30301 160 Rounds $100 shipped