Brand new in box Proof Research carbon 24 inch 6.5 creedmoor barrel, for Terminus Zeus QC action. $700.00 or make an offer.

Any rock collectors?

I have always thought unique rocks are cool. But never learned much about them.

Feel free to post cool rock pics.

Got a Manners T4A team stock for sale. It’s for a Remington 700 sa footprint and has an Area 419 arca rail with baracade stop. It does have the gen 2 mini chassis and will fit a 1.25 straight taper barrel. Stock looks great the arca rail does have a couple scuffs from bipod and tripod. Price is 1150 shipped and insured PayPal or Venmo pm me and we can exchange numbers to discuss more only trades would be toward foundation mg2 or centurion

55 boxes of 20 Hornady Black 223 75gr. All same lot number.

$800 shipped for all 55 or $15 each shipped


PayPal FF, Venmo or Zelle

So I’m chambering a 30 Sherman to you with. Chamber is perfect per the supplied gauge, which is lasered “Manson-30 Sherman Magnum”. Bolt falls closed on it, can be closed with moderate effort with a .0015” piece of scotch tape on it. After torquing, should have about .0005 clearance on the Go gauge.

Thing is, it falls closed on a piece of either loaded factory 300 PRC ammo or Hornady PRC brass. It occurred to me that possibly I was supposed to chamber short on this gauge, but I have a SAAMI 300 PRC gauge and it is definitely longer than the one for the 30 Sherman. What would y’all advise to do? I can take material off the shoulder and tenon to problem, just want to do the right thing.

Just completed a 308 build with a zermatt big horn origin action, proof 20" carbon barrel and timney elite hunter trigger. After completing the build, i popped in a mag with 308 snap caps and about every 5/6 cycles of the bolt the firing pin goes off/decocks itself when closing the bolt. I took out the mag and cycled the bolt again and still experienced the same thing happening. My question is , has anyone had this happen before, is there something in my build I missed that might be making this happen or is there a fault with the bolt/firing pin/action? Any help would be appreciated. I'll see if i can upload a short video tomorrow. Thanks in advance for any help

BNIB
3 mags and CH plate
Mostly looking to trade but willing to sell for
$1k plus shipping

Can trade up or down
Looking for
Mk4 w/PR3
G45/48
Dillion 750
CRB barrel
Ckyepod
A300

I bought this several years back but haven’t taken it out yet. I bought it from a guy in northern CO. He shot some matches with it and used it as a practice rifle. Can’t remember the round count but I believe it was in the 800s. He said it still shot very well. Don’t have any load data.

It’s in a bergara action and chassis. 7 twist. 28” long. A heavy barrel contour. 5/8 24 thread. The scope, mounts and bipod are not included.

$1050 shipped firm

The action has seen 0 rounds, will come with original box + original accessories. .478 bolt face.

The barrel is a proof research carbon prefit, sandero profile 20in chambered in .308 1/10 twist. The barrel has seen 150 rounds.

Barrel came off of my other rifle but ended up dumping a lot on my tikka that’s also chambered in .308

Had plans on making this sort of a shorty .308 but not ready to go through the build process at the moment on the solus.

$1200 shipped

Action has 1200 rounds on it so it’s smooth as butter. Barrel has 110 rounds on it. Shoots FGMM lights out.

- MPA marked Curtis vector 3-lug SA.
- Bartlein 1.25” straight, 26”, 1:7.5 spun up by MPA. Threaded 5/8x24.
- triggertech primary. Can swap it out for a elfmann for $100 more.
- APA fat bastard Gen 3

$1,400 shipped

New and unfired custom Straight Jacket Sig cross in 7mm SAW. Cerakoted, comes with Redding Die set and 200 pieces of never used WTO brass. Asking $2100 shipped and insured.

Garage sale of random small items that don't have a use. I will be going through more totes and adding items as I get time. More pics available upon request.

Scope Rings
1. Badger 306-27 34 MM Scope Ring, High, 1.275" $110 Shipped
2. Vortex Precision Matched Rings 34 mm 1.26" $100 Shipped
3. Vortex PRO 34 mm 1.10" $65 Shipped
4. Nightforce A104 1.125" 30mm STEEL rings, not Ultralite. $120 Shipped
5. Issued Badger 306-20 30mm .885" Circa 2003, 3XXX serial. $150 Shipped

Misc. Parts
1. Repro painted CAR stock with rubber pad $45 shipped
2. ADM AD-170-VPG-LOW-5LUG-FDE-STD .5" pic riser, FDE. Puts RH25 inline with 2.04" height mounts. $80 Shipped
3. SilencerCo ASR 5/8x24 MD $60 Shipped
4. Railscales UK Contract RSBM-P and HTP XOS Kit. $110 Shipped
5. Railscales MCX-QTR Stop, Terra Bronze $70 Shipped
6. Troy M16A4 QD sling swivel mount, long discontinued. $110 Shipped
8. Phlster P365 Skeleton $40 shipped

Payment Via PP FF, Venmo FF, Zelle.
All items will ship via USPS Priority or UPS Ground, whichever is cheaper

I've got some rare/unusual thermal sights that were developed for the HK XM-8 carbine. These have QD 1913 rail bases attached so are suitable for pretty much anything Pic based.

I have one Raytheon Close Quarters Thermal Sight System. The only thermal I've seen with a green phosphor screen rather than B/W. This sight also comes equipped with a 3A (3mw) IR laser pointer. $3000 Front left in pic below

I have three Insight CQX-002's. These have an amber filter for the ocular to minimize back splash on the shooters face. $3100ea Front right and two rear still in the case.

These have the original factory hard cases, soft cases, manuals and QR cards. All have been tested for proper operation, but they are pretty much unused, though the cases show wear from transport. Trades for 9mm, 38Spl and .357 ammo work for the owner as well. Other trades possible.

Looking for the 30mm picatinny accessory cap, 6 screw, Badger Ordnance part number 306-34. Looks like:

Anyone have one of these? I'm shooting more and more and while I love reloading I am trying to streamline things for time saving purposes.

I am currently loading on a Dillon 650 (which I would probably keep as I have multiple toolheads / case feeder etc etc and I could use it for little jobs) but the Apex 10 is a pretty awesome piece of kit and has enough stations that there are no compromises (swaging / powder check / separate seating & crimping which from what I have read is deffo the way to go).

I watched some videos and the Apex is pretty involved to switch calibers so I would only do that to do a large volume . This press would be setup almost exclusively for loading 9mm, maybe once a year I would switch toolheads to process - ie decap / size / swage - pre cleaned 9mm brass before cleaning it again (I know it is two passes but it keeps all the crap away from the press and the loaded ammo doesn't have lube on it). Bulk 223 would be the same deal.

I would be purchasing this and running manually initially to get it setup / get a feel for it with a view to automating. I would add the suite of sensors as that is part of the attraction (swage sense / primer orientation etc etc).

My questions to anyone who has the Apex 10:

1) My main question is how has the priming system performed? I have read a LOT of reviews and the one negative thing I kept seeing was priming issues - I know not everyone is mechanically minded so that could be a factor but if its going to be a heart break I don't want it.

2) Did you get the digital powder measure? If so how has it performed?

3) My current presses live in my unheated garage but I figure the Apex 10 with all the extra tech / gadgetry really needs to live somewhere more hospitable / heated - where does yours live at and how has the reliability been?

4) What dies are you using? FW Arms seem to be the go to for this machine - anyone running these?

Lyman / Mark 7 are working on another new press which is pretty revolutionary (Genesys) and I am keeping an eye on that but they have been saying it is just about to be released now for some time which makes me nervous (hopefully they are getting the final gremlins ironed out and it will be awesome). It is more of a out of the box solution with everything included and a bunch of new technology (separate motors for indexing / moving the toolhead etc etc) as opposed to the Apex 10 which is more of an regular / proven design where you can start basic (ie manually) and add tech until you are fully automated. The Genesys cannot be run manually which is a downside for me (if the press is doing something funky it is good to be able to run it manually to aid in troubleshooting).

https://www.mark7reloading.com/the-mark-7-genesys

Looking to buy a muzzle brake for the surefire socom sps 50 with the 1”x14tpi.
The m107 7/8”x14tpi will work also. If anyone has one they want to part with.

Hi. Have a guy asking for an Ultimatum Deadline action, and I don't have the 3lug bolt head dimensions.
If someone has one, can they please provide some measurements for me ? Metric or MAGA units are fine.
Dimension C is bolt body diameter, not bolt head diameter.
Thank you in advance for anyone who can help.

Up for sale is a 20” proof CF 6GT barrel threaded 5/8-24 has about 400 rounds on it can include 200 Berger 108 elite hunters

Asking 600 shipped PP FF or GS buyer covers fees

Title Says it

SBA4 brace in black. New. Bought it for a build a while back and it has sat in the box.

$50 shipped

Building a 458 socom ar15. I planned on a tromix barrel and bolt. I was looking to figure out if I should get an 8" or 10.5" barrel. I plan on shooting a lot of subs amd suppressed. My lower is already an SBR. Also wondering if you can run a Maxim defense pdw stock with the jp scs with 458socom. Thanks

Hey all, looking for a Terminus Zeus QC in SA LH, .308 BF. Might be a long shot, but wanted to see if anyone has one they'd let go. PayPal FF or Venmo ready to go!

AI AX 6mm CM 26” barrel 1-8 twist threaded 5/8-24 (round count 1,400)

• Finish Elite Sand
• Few scratches on barrel towards muzzle end
• Comes with the following:
• User Manual
• (2X) 10-shot magazines Elite Sand
• All the original accessories
• RRS Custom Chassis Plate BAXR15
• Anarchy Outdoors AX Cheek Piece Low
• AI AT/AX Elite Sand 6.5 Creedmoor 26" 5/8"-24 w/cap 2018 Profile Barrel 1126082ES
• Above barrel is brand new, packaging never opened
• Will ship in original box that I received from Mile High

Sale price $5,350 shipped and insured (not looking for any trades or to part it out)

• Ships from my FFL to your FFL (lower 48) AK and HI need to pay additional shipping cost
• Please PM for more conversation, pictures, and payment info
• Thanks for looking

I'm selling a used, but in great condition A&D FX-300iN. The scale comes with the power supply, breeze break, and manual. Basically everything pictured. Fantastic scale that functions perfectly.

The pictures show it at zero, and with a Berger 105gn Hybrid.

I'm asking SPF shipped and insured.

Please ask if you have questions or would like additional photos.

Selling a leopold mark 5 5-25 56 scope with all the goodies.
DI precision windage and elevation caps
Spuhr 5601 mount
Like new used on scope Mounted and used less than 50 rounds .

$ 2200 shipped ...

More pics available up request

I’m not sure which models these are but all are in good condition.

$120 shipped for all 4