Excellent condition. Includes all original paperwork and items plus a sealing plate should you need it. The screws are approximately 9mm and 12.5mm total length.

$365
Price includes shipping.
I can only accept money orders or Zelle.

Mounted on a hunting rifle and used during one range trip to fire exactly 13 rounds to zero and group before I went with another rifle instead. The firedot reticle is great. Includes Vortex 0.90" height rings and Butler Creek flip caps.

$475 shipped.
I can only do a money order or zelle. Sorry, no venmo or paypal.

Canik FSX, Lesss than 200 rounds down the pipe, LNIB. Beautiful gun and an inexpensive entry into competitive shooting. Comes with everything from the factory. I installed the red dot but the irons are there as well.

$725 plus insured shipping to your FFL. Unless youre in Oklahoma, then FTF with Oklahoma DL

I shot Altus' AI classic this weekend. I used my better half's 6mm Creedmoor. It's an Impact action with a Proof prethreaded competition profile barrel. The rifle has maybe 100 rounds through it until Saturday. Hornady 108gr ELD-M ammo was being used. The problem I had through out the match was when I seated a round and time was called, more than once (SEVEN times actually), I would go to clear the rifle and the unfired round would come apart with the bullet stuck in the barrel and the case and unfired powder ejecting from the action. A couple people suggested that the ammo is crappy, another couple more said carbon build up. I've never had a problem with Hornady match ammo before and I run it in my 6.5cm with no problems...

Nice LabRadar setup. No Bluetooth. Comes with ARCA mount, cable for external power, external trigger, and nice hard case. With the external trigger it has picked up shots really well. $200 shipped.

Getting out of shooting and dumping all my gear. This post is for magazines and accessories

1 kydex aics holsters. 35 a piece shipped or



2 gray ops aw/br 12 round magazines 130 a piece shipped

Selling a Surefire X300U-B. Light was mounted but never actually used, so it’s in like new condition and works as it should. $SOLD shipped

vortex razor gen 2 3-18x50mm EBR-2C MRAD
With badger rings, acro mount and 45 degree mount.

$1200 for everything!

Two new MDT mags, Savage stamped.

NOW $115 Shipped for the pair

DISCREET Venmo, Paypal FF, Zelle, CashApp, Check or MO

I finally after a year of shooting my AI purchased a second barrel in a different caliber (22 Creedmoor). I also picked up a new Thunderbeast can.

I was curious if it’s better to just direct thread the can or it if I can still use a muzzle device. When I remove and re-install a barrel, will the muzzle drive still be timed? It’s rare I shoot without a suppressor but it has happened.

Login to view embedded media
Crazy phyco drug using baby abusing cunt
Worthless abusive baby daddy
No one doing anything to protect this 2 month old the police had 5 encounters with her in 14 days .


Day before fatal encounter COS worker and grandmother ask police to help them take the child

So after monumental failures of the entire system- they FUCKING shoot the BABY.

This is so fucked up all the way around .

That crazy bitch was a fighter ; not like the old lady’s they usually tune up so the answer was to do nothing until it came time to spray rounds .

Selling for what I got into it, just decided to go a different route

LRI reproduction of the XM3 EFR/NVD mount they created by scanning an original and CNCing them.
SPF shipped with tracking

prefer PayPal please,

Brand spanking new, waited 2 months.. changed directions. Vhr reticle 375 shipped

Lightly used HiperFire R7P curved trigger shoe. Was installed to play with and shot a handful of rounds. No function issues. $100 TYD

New opened box never used them.

RCBS 243 SB T/C die set


40$ shipped

Kahles 6-24x56 CCW/ SKMR3. Medium Talley rings. This was on a hunting rifle and saw little use. Box, cover and has the turret tape from IDTS. And I THINK I have an extra turret tape if so I'll include. $1750 shipped. Insurance up to buyer. Paypal FF. FTF in E. Texas.

Looking for a L3i 457 barrel! Shoot me a message if you’re looking to get rid of one!

Hornady just released factory loaded ammo for this and listed manufacturers who are now making rifles for this cartridge

Login to view embedded media
I was hoping he’d use one of those laser de - rusters…

But it was satisfying enough.

Cast Iron receivers and welding don’t mix, interesting.

Looking to try out a AMP anealer let me know what ya have.

For my next build I am considering one of the following actions. Chassis will be a KRG W3 (Gen 6):

Lone Peak Fuzion
Impact 737
Zermatt TL3
Terminus Zeus
GAP Tempest

If any of these actions require me to make modifications to the KRG backbone for either the trigger hanger or anything else, then I will remove it from the list. If you have experience with either of these, please let me know. I already have a W3/CDG combo that required a good bit of milling. I dont want to modify another backbone as I feel it hurts the resale value. If you know of any other actions that are 100% "drop in" without the need for milling or modifying in any way, feel free to mention them as well.

I appreciate your help,

2 minutes ago

• New
• Add bookmark
• #33

Bartlein Barrels is pleased to announce the release of a new barrel material. Working with the mill and testing different types of material and tweaking the material over the last few years and with testing having been performed by ammunition makers we now have a different grade of material that we have had made and is proprietary to us.

The material has been proven in lab testing and in outside real world testing to provide a barrel life that is 1.5 to 2 times longer than the standard 416 grade of material.

We are calling the material 400MODBB. Pricing for this barrel material in standard diameters/contours etc...will be $555.

As always there are a list of things that effect barrel life and we cannot guarantee everything a 100% but for an example as I know it will be asked....in 6.5CM ammunition pressure test barrels are normally pulled from service at around 1700 rounds. The new material doing the same type of ammunition test work the barrel was pulled from service after it had 3500 rounds on it. We've had several 6mm's in calibers that the barrel normally is pulled around 1500 rounds go 3000 rounds.

We and or the customers that have done the threading and chamber work have had no issues with machining. I will say your reamers will not last as long but nothing that would really concern me. It does machine a little different but it's not horrible to work with.

So you will have a choice of the standard 416 material from us and the 400MODBB material.

Any questions it would be a lot easier if you emailed us at [email protected] or called in directly at 262-677-1717 but I can only imagine the amount of questions we will be getting and with everything going on in the world currently I'll ask you to be patient for the replies.

Later, Frank
Bartlein Barrels

Used black MDT ACC Elite 700 SA w/ jellies
$1250

View attachment IMG_8873.jpeg
View attachment IMG_8870.jpeg

Like new Redding 6.5x47 Lapua Type S Bushing Dies. SOLD

New in box Kestrel 5700 Elite with Link and Applied ballistics. Berry Compliant.
Kestrel 5000 rotating vane mount kit w/ carry case.
Kestrel 6” black mini tripod.

Will let it all go for $700 shipped. OBO.
Zelle or postal money order.
Thanks.