• Winner! Quick Shot Challenge: Caption This Sniper Fail Meme

    View thread

Filter

SOLD Safe purge

1. Rem 700 LA, Criterion MTU 26'' 300 win mag 1:10T, Trigger Tech Special flat set to 1.5#, Nightforce 20moa steel scope rail, Grayboe Ridgeback-Tan, Hawkins DBM CIP+, 2x Accurate mags CIP+, Area 419 hellfire match
400 rounds fired will give load data upon request. Action and barrel cerkoted graphite black, Bolt was also threaded for badger knob. Action otherwise has not been altered. No longer have scope but bipod can be included for additional cost.
SOLD

2.Aero precision M5 receivers, upper has been trued, Aero 15'' mlok rail ( bottom qd slot was removed for full length arca rail, no longer have) recivers and rail were coated with alumihyde in Magpul FDE. LMT bcg, LMT ambi charging handle, Lilja ar1024 1:11T 308 winchester barrel, superlative arms gas block, JP silent capture, dead air muzzle brake, Geiselle SSP Flat, 1x ASC 20rd mag , magpul grip and CTR stock with extended pad, larue receiver extenstion, larue stock riser
Built to try to make a run at PRS gas gun but never switch from bolt guns. Also bought a 16" criterion M118 1:10 barrel will throw in. Lilja has 600 rounds on it, criterion has 200 on it.
$Withdrawn for now.

3.BCM reciver set, BCM 8" mlok handguard, 9'' bcm 300 blk barrel, dead air muzzle brake, bcm gas block, toolcraft mil spec bolt, sprinco red spring, H3 buffer, pistol brace, 3x 30 round pmags
Factory lower and assembled upper by local shop with all BCM parts except BCG. Has roughly 400 rounds on it, never really got into night shooting like i thought.
$1200 pistol only
$2500 with T2 on adm 1/3 mount, Surefire with tape switch, troy irons

Payment: Venmo or paypal
Shipping is on buyer for FFL to FFL

97220499-7D0B-4088-A146-BCC8FFF797A9.png
8CE06501-3E8D-4C48-AF03-7A8934265D1C.png
5B4DF6B5-0D4D-4C46-9BCE-D8E27F4C74F5.jpeg

Attachments

  • F6DE0297-4E27-43DB-A466-3431B98E0307.jpeg
    F6DE0297-4E27-43DB-A466-3431B98E0307.jpeg
    116.3 KB · Views: 1,395
  • 9D619A90-DAE5-4FA8-B1FA-13CE95699EDB.jpeg
    9D619A90-DAE5-4FA8-B1FA-13CE95699EDB.jpeg
    136 KB · Views: 1,393

Accessories New 2024 Tenpoint Siege 425 moss green crossbow package

New 2024 Tenpoint Siege 425 moss green crossbow package for sale

Comes with crossbow 425 fps
Crank
Quiver
Optic w 100 yard reticle illuminated red /green and rings
Field points
Hanger
Papers
3 bolts standard nocks

Also included :

Tenpoint sling
Scorpion venom string fluid
Scorpion venom rail lube
Tenpoint nemesis broadheads
Tenpoint bolt puller and lighted nock tool
9 additional bolts
(3 have standard nocks & 6 have green lighted nocks )
3 packs of 3 (9 total) tenpoint lighted nocks
Tenpoint soft case

$1985 to door
IMG_5982.jpeg
IMG_5983.jpeg

Back In The Saddle

Took bit of a hiatus in shooting over the past several years. Really, took a break from a lot of hobbies and let work consume me. I'm finally getting back at it, was shooing a 6XC mainly, but today decided on the 300 PRC. Hopefully, I made the right choice! Plan on getting out to a mile and back into some long range comps. Went with a Sig Sauer Cross Sawtooth and I have an unused Nightforce NXS 5.5-22x56 that'll top if off. Any suggestions on ammo to get me started and back into the long range shooting? Thanks in advance!
  • Like
Reactions: 1911hombre

SOLD ZCO 527 5-27×56 (MPCT-3X) 10 Mil NLE

I have BNIB
1 ZC 527 5-27×56 (MPCT-3X) 10 Mil NLE
1 56mm sunshade
1 6 MIL 1.5" Block Mounts
1 flatline ops halo x bubble level

SKU 400-0474

Price incl shipping and insurance … PayPal/venmo/check

I would like to sell as a "package"

Asking

$3800 scope
$50 sunshade
$350 block mount
$100 bubble level

$4,300 for the package

I have never touched or handled the scope and has been in the box since received.

IMG_2703.jpeg

IMG_2702.jpeg

SOLD JP LRP07 6.5 Creedmoor sold to JAG0558

$3200.00 Shipped Insured

Includes HUXWRX Brake/762 Ti mount, Original mount, box and accessories.

Currently has the short JP ARCA Plate, but will include a 15” JP ARCA mount + screws as well

40 rds factory Hornady with the JP cleaning procedure accomplished

Beautiful, accurate rifle but I need the safe room or buy another safe!

Build From JP: (page 2 of build bottom of post)

743AA957-0FC0-4FE7-A80E-49B7DE299546.jpeg
5BA83FB8-CE87-4821-A54F-D0FC21C69712.jpeg
881E6FA0-CF16-4F97-8A61-8C73F44F1189.jpeg
01F0399F-FC19-45C0-B118-C890FC87B45F.jpeg
6BB63EF2-4891-47D8-8C74-EA56E9A4C624.jpeg

21E6C94C-4295-4259-8A65-2FB377C3EA5B.jpeg
  • Like
Reactions: lucaslarso

SOLD FS Discreet Ballistics .300 black out subsonic target and hunting loads

For Sale Discreet Ballistics .300 blackout ammo

109 rounds of target ammo 190 gr subsonic open tip match
11 spent brass
60 hunting loads 188 grain selous machined expanded subsonic

16” barrel loads told em 1:8 ar loads and work wonders in Q’s too

Best 300 blk loads I’ve ever shot

$sold and no wait for them to make any ammo ready to gun
IMG_6193.jpeg
IMG_6195.jpeg
IMG_6194.jpeg
  • Like
Reactions: Iamero

SOLD RWSnyder 7WSM unfired

7WSM (unfired)
Built by RWSnyder Gunsmithing
Savage blued 110 action, blueprinted and fish net fluted bolt
28” Shilen Select Match SS barrel throated for 180s, barrel nut delete, 5/8-24 threaded, RWS muzzle brake
SSS bolt handle and recoil lug and trigger
Manners T5A, bedded to this gun by Joe Ducos aka StockDoc (repurposed from other rifle)
$1200 $1000
IMG_4539.jpeg
IMG_4540.jpeg

SOLD LMT 6.5 Creedmoor MRGG 14.5" Upper

For sale is one of the last 20 LMT MRGG 14.5" 6.5 MRP-H Green MLOK 12.5 Upper Receivers. $2000 Venmo or Zelle.

The upper has no charging handle or BCG. Both are currently available from online vendors. They were not when I got the upper, but I used a BCG and charging handle from another gun. The gun includes an LMT MWS torque wrench.

The upper has a Rearden RC2 that would take the upper to 16.1", or if you prefer, I can send the original bird cage that came with the upper.

Original listing - https://ironsidearms.com/product/lmt-14-5-6-5-creedmoor-factory-green-anodized-upper/

IG vid - Login to view embedded media

Attachments

  • 2025-01-09 11.23.10.jpg
    2025-01-09 11.23.10.jpg
    906.1 KB · Views: 124
  • 2025-01-09 11.22.58.jpg
    2025-01-09 11.22.58.jpg
    1.4 MB · Views: 137
  • 2025-01-09 11.21.34.jpg
    2025-01-09 11.21.34.jpg
    1.3 MB · Views: 159
  • 2025-01-09 11.21.31.jpg
    2025-01-09 11.21.31.jpg
    821.3 KB · Views: 151
  • 2025-01-09 11.18.37.jpg
    2025-01-09 11.18.37.jpg
    1.4 MB · Views: 189
  • 2025-01-09 11.18.29.jpg
    2025-01-09 11.18.29.jpg
    1.4 MB · Views: 172
  • 2025-01-09 11.16.58.jpg
    2025-01-09 11.16.58.jpg
    727.1 KB · Views: 150
  • 2025-01-09 11.16.50.jpg
    2025-01-09 11.16.50.jpg
    999.5 KB · Views: 108
  • Like
Reactions: Fitz and mrtoyz

408 Cheytac initial loads

So, I have a rifle from Mirage ULR. He recommended a starting load of 140gr of either N570 or 50bmg with a 400gr Cutting edge Laser cut bullet, but I went with a 450gr bullet. Started with 135gr of both powders, with a 136 gr follow up. The N570 at 135gr got a velocity of 2850 fps, a bit over Desert Techs 447gr claimed 2730. I did not try the 136gr at this time. The 50bmg powder seemed 300fps slower. Odd
I got a big jug of N570, and ordered 150 more projectiles. Right now I am just collecting data. I plan to dial in the round after I get a 50bmg suppressor. I shook the range ceiling and caused rain with every shot.

Attachments

  • IMG_7742.png
    IMG_7742.png
    1.8 MB · Views: 53

SOLD TS Customs KS1-A stock w/micro chassis

I have a brand new/never used or fired TS Customs KS1-A stock for sale. These are not available for purchase anymore unless you get one on a TS Customs rifle. I pulled this one off the shelf, set this barreled action in it to see how it fit me. I’ve decided to stick with what I already have.

Cut for an Impact SA (or any 700 clone)
M5 bottom metal (not included)
Adjustable cheek piece
Flush fit pic rail attachment up front
Short ARCA plate (or will accept a full
Length plate as well).
Flush cups on left side and bottom.

The short ARCA plate IS included, but it is NOT new. I just added this as a bonus to the buyer. It came off a foundation stock that I have. The plate does show wear/use.

Price: $1150 shipped

Trades: Only trade would be a new/like new Manners LRH with a mini/micro chassis in short action with the ARCA rail included.

Any questions, please feel free to ask.
Thanks,

Attachments

  • IMG_0647.jpeg
    IMG_0647.jpeg
    867.4 KB · Views: 175
  • IMG_0648.jpeg
    IMG_0648.jpeg
    837.4 KB · Views: 168
  • IMG_0649.jpeg
    IMG_0649.jpeg
    760.9 KB · Views: 131
  • IMG_0650.jpeg
    IMG_0650.jpeg
    796.3 KB · Views: 153

SOLD BAE Oasys UTM 640p Clip on thermal

Up for grabs is my used BAE Oasys UTM 640p/30Hz Clip on thermal. Probably the best sub 5k thermal clip on out there, FP laser built in, etc. this is NOT a grey market unit, came from a reputable seller from a batch of PD trade in’s. 03-11 MFR date

Comes as shown with Wilcox flip to side mount. Has a couple dead pixels that would likely disappear

$3,000 shipped UPS NDA

PayPal F&F, Venmo F&F, Bank wire.

IMG_7355.jpeg

IMG_7374.jpeg
IMG_7377.jpeg

IMG_7378.jpeg

IMG_7387.jpeg

IMG_7391.jpeg

Attachments

  • IMG_7375.jpeg
    IMG_7375.jpeg
    287.3 KB · Views: 41
  • Like
Reactions: EM_556 and RC556

Inexpensive hunting rifle

Good evening fellas, looking for some input.
My younger sister is looking to purchase her first “real” hunting rifle.
For the last 10ish years she’s hunted with a single shot .243 our dad picked up for her when she was 8/9 years old, now she’s wanting something different.
She’s looking for a bolt action chambered in either 270 or 308, and she is dead set on having a wood stock.
Does anyone have experience with any of the newer offerings that come with a wood stock?
She’s looking to spend in the sub 1k-ish price range including rings and a decent 3-9 to put on top of it

Optics Vortex Viper PST Gen II 1-6 MOA BNIB

Brand new, still in the box, only taken out for pics here. This was sent as a completely new replacement for a warranty issue on another scope, received it direct from Vortex in August this year.

1/2 MOA Elevation & Windage turrets
Illuminated VMR-2 reticle, SFP
1-6 x 24
30mm tube diam

$475 shipped

Attachments

  • 2024-12-03 11.18.18.jpg
    2024-12-03 11.18.18.jpg
    364.2 KB · Views: 84
  • 2024-12-03 11.11.19.jpg
    2024-12-03 11.11.19.jpg
    366.7 KB · Views: 78
  • 2024-12-03 11.12.01.jpg
    2024-12-03 11.12.01.jpg
    472.8 KB · Views: 71
  • 2024-12-03 11.11.57.jpg
    2024-12-03 11.11.57.jpg
    468.6 KB · Views: 55
  • 2024-12-03 11.14.50.jpg
    2024-12-03 11.14.50.jpg
    310.2 KB · Views: 52
  • 2024-12-03 11.14.43.jpg
    2024-12-03 11.14.43.jpg
    427 KB · Views: 55
  • 2024-12-03 11.13.19.jpg
    2024-12-03 11.13.19.jpg
    379.1 KB · Views: 48
  • 2024-12-03 11.17.20.jpg
    2024-12-03 11.17.20.jpg
    323.6 KB · Views: 42
  • 2024-12-03 11.17.15.jpg
    2024-12-03 11.17.15.jpg
    359.9 KB · Views: 58

SOLD Leica Geovid Pro 10x32 Full AB

Leica Geovid Pro 10x32/Full AB

Excellent condition and perfect glass.

Just back from an hunt, they performed flawless. But the NL’s are too good and I’m gonna stick with them.

$2000 Shipped and Insured. Sorry not interested in trades. PP via gift, Venmo accepted.

Jimmy

Attachments

  • IMG_3950.jpeg
    IMG_3950.jpeg
    508.9 KB · Views: 77
  • IMG_3952.jpeg
    IMG_3952.jpeg
    358.5 KB · Views: 77
  • IMG_3953.jpeg
    IMG_3953.jpeg
    418.6 KB · Views: 69
  • IMG_3955.jpeg
    IMG_3955.jpeg
    429 KB · Views: 63
  • IMG_3956.jpeg
    IMG_3956.jpeg
    570.4 KB · Views: 74