For sale is a Trijicon RMR RM06 with 3.25 MOA dot and adjustable brightness. It is very lightly used and in like new condition. Includes the original packaging, hardware, and a new battery.

$375 shipped. I am not interested in trade offers. SOLD

New CAMPRO 30 Cal (308") 220gr FCP Bullets - with double cannelure for 300 BLK and/or 300 Win Mag Etc
$99.75 / 500 ct (19.9 cpp) (or $24.95 / 100 ct sampler)
(Load data available on our website)
https://ravenrocksprecision.com/30-...ith-cannelure-300-blackout-subsonic-updating/

Swiss P 300 BLK Primed Brass - Brand new primed brass made in Switzerland (with a norma headstamp)
As low as 33.9 cpp
https://ravenrocksprecision.com/300...ass-norma-headstamp-made-by-swiss-p-updating/

Free shipping over $150, norma (made in Sweden 300 BLK brass also in stock)

The other day I was out picking up some more Varget and decided to also buy some ar comp just to play with. I never see this powder being mentioned but was bored so I figured why not, I’ll play with a pound. Looking at Alliant’s site it listed 41.4 as a node for 175smk, so I loaded up a OCW test starting at 40gn’s and ended at 42. This is being shot out of a 16” gas gun.

On shooting and watching the speeds on my magnetospeed I stopped shooting at 41.8 gn’s due to the speed was way up at 2564 fps (3 shot groups). I figured that was moving out of this gun. Now on looking at the brass it all looked great. Zero signs of pressure but still... Also the gun felt like I was shooting a light load similar to fgmm. Hell I dunno..

So on looking at my groups and speeds I had some great stuff. 40.5, 40.7 and 40.9 all looked identical and were .5 moa with single digit es /sd and were around 2512 mv. Compared to my varget load thats around 2.5 grains less of powder and I picked up a tad bit of speed. Brass looked great and the gun was smooth firing.

Anyways, anyone use this powder and what are some opinions? I love my Varget but to me it this stuff felt like I was shooting a lighter load. Oh btw the Alliant site’s listed recipe at 41.4 gave me a .7 moa 3 shot group with single digit es / sd and 2552 mv. Brass looked fine on that too but that’s speeding out of a 16” gas gun.

First focal, Mil-XT Digillum (illuminated red or green) reticle. Dark earth in color. Used very little, but in excellent condition. Very light ring marks (shown as best I could in photos). Clear lenses, no scratches. $1625 shipped and insured.

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned. Follow the site rules.

Selling 600 Hornady 25 cal ELD-M. Same lot.

$240 TYD.

115 shipped

For sale is a never used NIB MDT ACC SRS Butt Stock. $225 shipped.

Like new EC tuner brake. 6.5mm bore diameter. 5/8x24 thread pitch.

$150 shipped.

There's nothing in my Amazon shopping/search history, or any internet history that would make either of these two books on the right come up and be "suggested" for me. I'm SURE it's just a coincidence. Riiiiight.

What ya all think of this mount.Seller doesn't say much about it and when I emailed him he couldn't give much jnfo.The welds look like a twomanattack reproduction mount to me.Its over 2k right now.Thoughts?

Leupold MK 4 4.5-14x50 LR/T Impact 60 reticle.

Comes with the Leupold MK 4 rings as well.

Really good condition, glass is clean and
clear, turrets still feel and work as they should. I do not have the original box however.

Asking 400 shipped

I’m putting a m40a1 together on a repro smear and was curious if who knows the screw sizes needed for the m70 bottom metal? I’m trying ti and source screws but I don’t know the thread pitch, length etc.

I’ve spent a fair amount of time combing the older m40a1 build threads and most the builders people used have retired. I’d like to have this coated in black oxide. Any suggestions who to send this off to when the time comes?

Hi there, I got a Zeiss discount cert and is debating between S3 6-36 and S5 5-25 for prs centerfire rifle. Does anyone have experience with both of them?

Simple question would be: is S5 $700 better than the S3? I have tried my friend's S3 at the range and find the eyebox bit tight comparing to razor gen3 and leupold Mk5, while the clarity is decent.

If the S5 got better eyebox and better glass quality, I personally would think probably it worth the extra cost.

Brand new. Wouldn’t work with my trigger hanger so selling it.

$200 shipped SOLD

-Shaw 18” 450 bushmaster 416r stainless HBAR 1-24 twist 11/16-24 thread with Faxon low profile gas block and gas tube. Barrel is unfired but does have scratches on it from sliding on gas block and hand guard.

-Wilson combat forged 458/450 upper receiver with forward assist, Magpul dust cover and Wilson combat large lever charging handle.

These parts were installed on a build that was never fired.

$325 shipped to lower 48 UPS ground.

Selling a few items I have lying around. I do not have the original packaging for any of them.

SB Tactical FS1913 = $125 shipped SOLD
SIG minimalist plus = $175 O.B.O shipped
SIG minimalist = $175 O.B.O shipped

CHASSIS SOLD TO LuvDog......

Muzzle Brakes $130 each shipped...all 6.5 and threaded 3/4-24....3 ATS Brakes 1 ACE Brake.
1 ATS BRAKE SOLD TO 406Shootist

Mounts are all sold!

Added….
2 AICS mags with Area419 +4 adapters and factory floor plates $100 each shipped

BOTH GRAY OPS BAG STOPS SOLD

Figured I would start a thread so people can talk about Bags and Fill options. I got to play with some spexlite at a match recently and am thinking about ordering some of this stuff. I have 25lbs of bags in my kit, and would like to take some of the weight out of my pack. All the bags have had some fill removed so they are more shootable. I used to run glass bags but they have gotten so heavy and end up tearing up the bags. I usualy only get about a year out of a gamechanger before the seams blow out and I just replace them. I am thinking a lighter fill will be less wear and tear on the bags and as long as its still shootable, could be a move in the right direction.

AG Plus one with Sand - 13lbs
AG Smediums with Sand - 8.5lbs
AG Smedium with Poly Beads - 4.5lbs
AG Pint sized with Sand - 7.3 lbs
MDT Peanut with Sand/Glass - 8.3lbs
Cole Tac Plate Bag with Grey Ops Pro Plate Filled with Glass Beads - 4.7LBS

The heaviest spexlite beads 5235 would be about 5.5-6Lbs in a Plus one, so about half what the heavy sand is. https://www.boxtobenchprecision.com/store/spex-lite-5235

There is also the Olympic mix which is 5325 and 5125. https://www.boxtobenchprecision.com/store/spexlite-x-ginny-thrasher-olympian-shooting-bag-fill

What do you guys who shoot PRS run? I know its tough to beat heavy sand but there may be some new options that get some of the unnecessary weight out of our kits. It would also make flying with them much easier.

Looking for some feedback on the Pure Precision SKLTN action.

I would like to buy a bigger shooting bag. Let me know what you got.
Thanks

MPA BA Bolt Action one piece mount. 34mm - 1.125 - 0 MOA
Great condition, no dings, dents or scratches

$120 shipped USPS Priority / PayPal FF or plus fee

In on trade Trijicon 1.5x16 compact ACOG 2moa center dot with mount. $SOLD shipped.

New only mocked up for a build

260 shipped

New in box (SKU100042) 6.5CM AR10 Carbon Fiber Proof Research Barrel $750 shipped. Venmo/PP F&F

Unfired barrel

Geissele gas block and tube

265 shipped

Zelle