I’ve got fat fingers and whenever I load my Center-X ammo, I always end up smearing the lube from the bullet onto the brass. I have to think that this leads to variation and maybe dirty chambers as the lube builds up.

Anyone have a way to load rounds into CZ45X mags or Voodo mags with out having to finger bang them and get all lubed up?

Stocked up on these anticipating a 22 ARC build but decided to head a different direction.

All the same lot, will only sell as packs of 5 boxes of 100, quantity 500. I won’t separately sell a couple of boxes. There are 3 —> 2 packs left of 5 boxes… total quantity 1500 -> 1000 left (2 sold).

For each additional pack of 500 you buy, take $5 off.

Each pack of 500 is $150 shipped and insured! I will likely end up separating the sleeve FYI to ship as the dimensions of the sealed packs are unconventional for most boxes.

Thanks!
Absolutely no trades
PayPal FF, Venmo, Zelle, or check with clearance

Republicans allowed the left to have their luggage-stealing, transvestite, fudge-packing leftist, criminal cabinet and agency heads...

But when it comes to a Republican nominees... it's delay, delay, delay... obfuscate, trash the nominees... anything. And in the case of Kash Patel.... make damn sure he can't start working for as long as possible to allow the shredding and cover-ups more time to succeed.

How many servers being wiped? How many promotions being handed out and transfers to keep shitbags 'hidden.; How much evidence of criminal behavior inside the DoJ and FBI is being destroyed or hidden before the housecleaning can begin.

It's been tradition to let a President have his cabinet. But not when it comes to the left. Note that all Biden's pardons were also 'justified and fine' but Trump's J-6 pardons are a travesty and a threat to our nation and they are going to be brownshirts and his footsoldiers... when that's exactly what ANTIFA and the Black Block and the BLM criminals have been for the left...

Well, nothing new here. Just wanted to rant this morning.

Can't wait for Patel to go medieval on the Swamp's main enforcement tool.

Sirhr

Accu-Tac bipods for sale. Both in great condition. 1- BR-4 G2 Picatinny - $250 local pick up (DFW area). $275 shipped. 2- SR-5 G2 Arca - $275 local pick up (DFW area). $300 shipped. (don't have box for SR-5 G2 Arca).

Law Tactical- AR folding stock adapter, Gen 3-M

FDE

Gov/Mil model

AR-10 or AR-15

$200 shipped

So. The sgt arms with integrated arca fit Seekins and aero enhanced uppers.


This lwrc almost looks like it would fit. The upper seems beefier.
Anyone know

CDG Prefit Dasher barrel, brass, modified case and dies.....$550.00 shipped.

Chambered by Fisher T&C, 1.25" CRB barrel finished at 24", 7.5 twist, threaded 5/8s 24, .145 freebore, with paper work.... 140 rounds through this barrel.
Forester custom honed FL sizer .264 neck, Forster Micro seater die, Modified case, 100 pieces of Alpha brass 40 pieces fired twice, 60 pieces fired once, 60 pieces sized and primed with CCI450s.

Also have a set of Whidden 6BRA dies....click adjustable FL sizer and micro seater $200 shipped

Leupold Mark 4 M1-16x scope with TMR reticle. Excellent condition, glass is pristine, scope has light wear but overall very nice. 2002 manufacture.

$1,000 shipped, Payment via PayPal F&F, Zelle, USPS MO, Venmo. SOLD

Nice Timney 2 stage with a flat trigger shoe. $140 shipped. Payment via PayPal F&F, Venmo, Zelle, USPS MO. SOLD

Bergara B-14 HMR
(.308) 20” barrel 1:10 twist
2 AICS five round magazines
KRG whiskey 3 chasis
KRG spigot
ARCA rail mount
Magpul bipod
Vortex Venom 5-25 (EBR-7C Mrad reticle)
Leupold rings and base
Brand New Sunwayfoto carbon fiber
tripod and carrying case/Arca mount
70 rounds of .308
Less than 50 rounds through the barrel

$2500

WTS krg bravo for rem 700 and clones. Asking 350 obo.

Lets see the body cam footage. Justified or just the bad apple?

Oh wait, no body cam or dash cam video? Then it's a good shoot.

Sub machine guns to deal with lady/ kids outside without a mask . That is not a man or a police officer that is a Gestapo thug .

In CA no less where mass murdering child fucking illegals can walk the streets completely safe from these same goons .

Starting with Remington 7MM SAUM brass, You'll need:
Redding 7MM Saum Competiton dies(Type "S" match)
.295 and .291 bushings
.264 Expander mandrel
Feeler gauge
Neck turning tool
Neck trimmer
Caliper
Deburring tool
Priming tool
NECO case neck lube kit

Use the .295 bushing and run the brass through, necking down. I lube the necks on new brass and the entire case if it's once fired 7 SAUM brass.



The next step is to run the brass through your expander mandrel, with a .264 mandrel to ready it for turning....




Set you neck turning tool at 15 thousandts with a feeler gauge, and turn the necks all the way to the neck/shoulder junction. Use of the moly coated shot to slick up the inside of the necks will really help the process and keep the brass from "galling".





Like so....



Trim to 2.025" and deburr inside and out....



Prime, charge and seat bullets per usual.

After the initial firing I use the .291 bushing in the sizing process.


Runout has been stellar on the 500 rounds I've processed using this method.



It's been worth every bit of effort.

A poster came up with a great idea. Ship them to an isolated island, where they can kill each other! Have cameras setup everywhere for pay per view.



“We also have many violent criminals in our country, however, that did not necessarily come here illegally, but have been arrested 30 times, 35 times, 41,42 times, in a couple of cases,” Trump said.

He then highlighted heinous crimes, ranging from murder in general to criminals pushing passengers in front of subways to baseball bat assaults to violent home invasions of elderly folks.

“I don’t want these violent repeat offenders in our country any more than I want illegal aliens from other countries who misbehave,” Trump said.

“And I say, and this is subject to getting it approved, but if they’ve been arrested many, many times–they’re repeat offenders by many numbers–I want them out of our country,” he added. “I also will be seeking permission to do so.”

Trump then said America would pay “a very small fee” to a “foreign land” that housed the worst of criminals:

Obviously, Badger Ordinance IMUNS is out of the question. Is there any other option for the old school AW thumbhole stock?

Last night I fired 5 handloaded rounds through my 20" 308 AR. FC brass, 175 smk bullet, 41.5 IMR4064, the 5 rounds average 2570 fps which is in the ballpark of normal for a 20" I believe.

However, I had 2 of the WLR primers piece at the edge..... see the 2 primers at the top of the pic in my hand. I don't believe I'm seeing any other pressure signs on the case head. The bummer is these pierced primers apparently stuck my ejector down, and cut little divots into my bolt face.

What would cause a primer to pierce at the edge like this? Is this bolt still safe to use once I get the ejector functioning again?

Finishing up my M40 replica. I still need to mount the sling mounts. Thanks to Tokiwartooth for rebuiding and anodizing my scope, Mike Lau for the receiver work, stamping the barrel and Shawn Broussard with Titan Precision in Iota, LA. for chambering, bedding, straightening out my screwups. Ready to go shoot.

Poll complete, we won! Thanks for your votes!

I've been out of the scope game for awhile. I currently own a nx8 4-32 ffp and a March 3-24x52 ffp.

The March was a very unique scope in weight and magnification range years ago when i purchased it. It's not the best at everything, but very versatile and I've taken multiple elk with it.

Contemplating getting a new scope for a new gun I'm dreaming up and wondering what has come out in recent years that is better than what I have.

I'm looking for something that is relatively light, has a pretty high magnification at the top end for load development, and a wide field of view on low power for hunting in timber. The reticle also needs to be visible in dark timber on low power without illumination. This is one area that the March really excels - looks like a duplex on 3x and the center dot is amazing for shooting groups on high power.

Any suggestions? Surely something better has had to come out in the past 8 years. The nx8 didn't exist when i bought the March. I like the nx8, but the March has a more versatile reticle.

Thanks!

For those interested in the WLVRN, I've put all my thoughts together here:

Desert Tech WLVRN

I am the original owner. I mounted it, zeroed, confirmed it tracked reliably and accurately, then it's been sitting. This scope is in like new condition and comes with everything it left Colorado with **rings are not included**.

I like these US made XTR III so much that this is my 3rd 5.5-30 & I had 2 of the 3.3-18X50. I think the 5.5-30 have noticably better optical performance than the 3.3-18 and I think the US made non illuminated versions are better than the Philippines made illuminated versions.

SPF $900 shipped, if you want insurance (I wouldn't do it because it's a scam) I'm happy to insure it but that cost is on the buyer. I prefer no PayPal as they are anti gun (but so are most all other options, so...) but I will accept it as long as it's discreet and the fee is on the buyer.

Trades:
-ARC Xylo chassis for a R700 SA right hand (possibly other similar chassis)
-Bushnell Match Pro ED 3-18X50
-Bushnell Broadhead LRF

Please reach out with any questions or for more pics.

Looking for a FFP MIL scope for hunting out west with a minimum magnification of 2x-3x and around 15x on the high end for practice at the range and longer shots. I’ve looked at the NX8 and Burris XTRs. Vortex has a bunch of options not sure which ones are worth it. I’m looking to stay around 1K with gov discounts. Durability is more of a concern than finding the clearest one. Am I missing any options from any other manufactures?

That’s right, you heard it here first folks, our very own Marxist turned capitalist flip flopper now has a rifle scope named after Facebook… eh, Meta.

Okay all joking aside, one of the most exciting optics announcements at SHOT is the new S&B Meta 3-18x42 but with a FFP flavor. Here are the specs, read them and weep, no - I mean literally weep because #FOVGate strikes again and the USA version gets shafted or restricted due to Swaro’s sketchy patent. But even with the lower FOV this could prove to be an amazing crossover optic, but where will the price land on Schmidt’s wheel of fortune, will it be $3k, $4k or maybe even $5k…



See attached file for specs

So my 2019 Nissan Titan, 73k miles needs a new engine. Known problem with a bad batch of cylinders, luck of the draw if you got one or not. I bought it new, still under warranty. 100k or 96 month. Keep it or ship it after I get it back? Everything else is in good shape. No other issues.