Hey all, I'm curious does a flash can (one big hole) act any different than a linear compensator (with multiple forward facing holes)? Is there any appreciable difference? Does either of them act as a break? What do they actually do?

Fellow Hide Members,

I have built a 6mm ARC And running into a little problem. My build is a 20in proof with a radian Mod 1 builders kit, Aero Precision Gas block adjustable.

1. When the bolt is back in the locked position, and I push bolt release it chambers into battery correctly.

2. I fire a round (no noticeable damage on brass) and bolt cycles but does not pick up next round, the mag is a duramag 10 rd by c products, (6.5 Grendel)
Ejection pattern is at the 3:00-4:30 mark.

3. Gas system is at full value, all way open.

Any Ideas/ experience with this problem and how to get this to run more than one round without manual intervention would be greatly appreciated!

Thanks

Hey guys, there's nothing in the manual, so I'm guessing not, but do you put anything on the tenon with an AXSR?

Looking to sell a new in box Leofoto LH-55 Low Profile Ball Head

Height: 98mm / 3.86in
Ball diameter: 55mm / 2.17in
Panning base diameter: 72mm / 2.83in
Mounting hole: UNC3/8"-16
Weight: 812g / 1.79lb
Max load: 25kg / 55.12lb

Sold

Login to view embedded media
The guy that was supposedly pointing a gun at men in his yard at 12:39 am was shot in the back- NO video from 12 involved ever shows victim with gun .

Gonna cost that little rural Virginia town $77 million.

What:

Sako TRG-22 Rifle with the following:

- 4 - Sako TRG-22 Magazines (They list at $200 a peice...)
- Bartlein 1:8 MTU barrel in 6.5 Creedmoor, installed by Patriot Valley Arms, 5/8x24 threaded for US compatibility.
- Vision Chassis w/ Folder from Gulf Coast Precision in FDE (competition rail with 20 MOA Picatinny NV Bridges) [Lists for just over $2000]
- EGW Extended 20 MOA Picatinny rail
- PVA Ultra Light Brake
- Two Vision Weights

$3500.00 or BO - cash (PP FF / Check or MO [wait to clear]) or comparable value in trade.

Shipped to your FFL from my FFL

Condition:

Overall the rifle is in excellent condition. I've been able to repeatedly shoot at 1000-1150 yards with 147gr ELD-Ms without issue. (It also loves 140s, 142s, 144s, etc.)

There is some minor wear marks on the chassis here and there. The only ACTUAL marks are on the NV Bridge where the Elite Iron bipod took off two small circles of cerakote on the rail.

Trades:

Mostly, I'm looking for a thermal weapon sight, preferably a clip-on.

Note:

The Vision Chassis is insanely adjustable... the rifle will fit everyone without issue. Well, maybe not @Lowlight!

It has 527 rounds on it and the bore is flawless.

Pictures:


22LR IBS Rimfire 50 Yard Target at 100 yards, Spark Munitions (Peterson) 142SMK, LRP, ammunition. (Rifle loves that ammo / 2700FPS.)

Login to view embedded media


I’m willing to split the action and chassis up:

$1600 for the Chassis

$1750 for the barreled action

- S5740311 - Rear Emergency Sight Kit - $125.00
- S5740321 - Front Emergency Sight Kit - $150.00
- S5740335 - Match Sight Mounting Set - $200.00
- 3 x S5740494 - Cheek Piece (Riser) TRG 22/42 10mm Green - $50ea

If you take it all, $325 shipped to the lower 48.

PayPal F&F or Zelle

Thanks for looking

Barnes 338 TSX 210 100 count (2x 50)
$60 shipped

Both sold 2/1

Up for sale are 2x 30% off MAP certs for Vortex at Euro Optic.

Was planning to use them for a 1-10, Impact 4000, or maybe 2 more Razor Gen 3s, but some other things came up that needed the money instead and now I won’t use these before they expire on 2/28/25.

Asking $80/ea. I’ll email you the picture of the cert once payment is received. Payment via Paypal F&F, zelle, USPS MO, or check.

Edit 2/1: both sold

I've found more than a few threads talking about Staball Match being dirty and possibly causing chambering issues, pressure issues, and carbon rings pretty quickly. Has anyone ran it for more than 200-300 rounds between cleanings and had no issues?

LH RimX 22lr with 20” 1:16 proof prefit competition contour. 50 rounds total. 30 moa rail. Triggertech diamond pro curve. One magazine. Shot SK standard one ragged hole. I built 2, one lightweight. I shoot it more.

$1550 shipped action/barrel
$1775 shipped with Triggertech

PP FF/Venmo

Selling

Nomad 30 E brake (KA180)-$100 shipped

R series front cap-DA204-$40 shipped. Sold

I have a longtime acquaintance who is a “genetic psychology” professor at one of the most prestigious universities in the world. We were chatting about various things (prompted by the inauguration, and I’m sure you can guess his personal persuation on that subject) when he went into that they recently concluded a long-term study that included political identity/affiliation, sexual orientation, gender identity, etc amongst other criteria in the study that affects mental health.

Now comes the FUN part! The “University” is REFUSING to officially publish the results of the study because it literally TRIGGERED the entire staff, students involved (all postgrads), and they are “justifiably concerned that the current administration and Far-Right will weaponize their study for propaganda purposes against marginalized groups…”

The salient findings (none of which are the least bit surprising):

Liberals / Progressives / Socialists / Communists are 600% / 6 TIMES more likely to suffer “significant, chronic or non-trivial mental health issues requiring long term medical intervention” than Conservatives / Capitalists.

It only gets worse from there.

Atheists are over 400% more likely to commit suicide / suffer mental health issues requiring treatment than non-Atheists.

Homosexuals are over 700% more likely than heterosexuals.

The newfound Woke Religion of “Transgenderism” is where the rubber really meets the road. Those suffering from the mental health disorder of “Trans-anything” are 1400% — 14 TIMES — more likely to not only require significant mental health treatment, but they have an alarming tendency to have violent physical outbursts against themselves or others and are potentially more likely to engage in violence against perceived enemies.

They’re burying the WHOLE thing. Supposedly the study was partially funded by a CDC grant.

FDE Leupold MK5 3.6-18x with PR2-Mil reticle. Box is still sealed with shrink wrap. Bought for a dmr build that I went a different direction on.

$1900 shipped to the lower 48. PayPal FF, Venmo or Zelle for payment

No I will not open the box to take pictures for you. PM if interested to avoid scammers. Not looking for any trades.

Gen 2 Cronus 4.5x-29x56 MRAD with the APRS6 reticle. Vortex 1.26” PMR rings. Butler creek caps, MKM parallax wheel and oem throw lever. Package deal only, I have way too many extra rings/mounts sitting around as it is. Glass is clean and clear in excellent condition. The scope body has 2 dings (pictured) on top of the bell, purely cosmetic. Butler caps cover one of them.

SOLD shipped to the lower 48

NEW in Unopened Package Geissele Super Sabra Lightning Bow Trigger for IWI Tavor SAR & X95
$85 Shipped in CONUS.

• Precision machined from precipitation hardened 17-4
• Designed to replace the standard trigger in IWI Tavor rifles
• Adjustable via set screw
• Part 05-328
  
  

I bought 8lbs of Midwest Powders MP 525 says similar to CFE 223. Powder is from American Reloading. Anyone else use this powder ?

For sale is my LSS XL Gen 2 chassis. Will come with the rear stock and handle.
Asking $750 OBO

I am selling my short action customs win modular die. It has three collars and four mandulars. Comes with everything you need and a decaping as well. Comes with the wrench as well for removing and tightening.

Collets- .335 .334 .336
Mandulars- .3070 .3060 .3065 .3055

Price: $400

Looking to put together a new western hunting rifle and I’m trying to save a little weight over some of my current rifles. Primarily looking at the anTi X and Nanook, but open to other options. If you have experience with those or any other lightweight option I’d love to hear your opinions.

What I’m struggling to do is compare the weight to my other actions (I have 4 built of Zermatt Origins) and there seems to be a lot of variance on listed weights for the Origin. I see it listed at 28oz on some sites, 31oz on others, I even saw it listed at 50oz on one website which doesn’t seem right. The only thing I can think of is maybe some of those weights are without the rail and lug and other weights include those. If anyone could give me their own measured weight including the rail and lug I’d really appreciate it.

I know this isn’t terribly important because I’m saving weight either way, I’m just trying to get a comparison to see how much weight I’ll save vs the money invested into a completely new rifle. I just see the listed weight for a “lightweight” action like the NBK being heavier than the chunky Origin and it just doesn’t add up in my head.

Here’s what I’m thinking for the build as of right now.
-Lightweight LA action
-20-22” 7PRC carbon barrel, probably Bartlein or Proof
-MDT HNT26 folder or XLR Element Mg
-Leupold VX5 3-15x

Any recommendations for other parts to shave a little weight or personal endorsement of the things I listed are appreciated.

Assume all else the same - you have 2 uppers, one is carbine length gas system, one is mid length, 16 inch barrels in 5.56.

If you wanted to use one on a close quarters AR build with a red dot, and one on more of a medium distance range toy with an LPVO, would you have any preference as to which rifle got which upper? Either one perform any better for longer distances vs close quarters?

I bought the wrong one. It's new and never been mounted. +6 rounds for the rimx mags.

$22 shipped

1 each as new Hawkins Hunter mags in 308/creedmoor and 223

$100 each shipped

Will trade one for a long action Hawkins Hunter belted magnum

PP FF/Venmo

Looking at WTO switchlug for a tikka TAC A1 so I need 1.15" tenon diameter or less...

Brand new
Lone peak titanium short action
Bartlein 22 in sendero
Trigger tech diamond
Xlr Vikings armament chasssis
Axisworks llc gun smith


4775 plus shipping to your ffl

Scope not included in price but would sell add 2k for scope and area 419 rings

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.