Savage Elite Precision in 6.5 Creedmoor.

$1300 shipped to your FFL.

Low rounds, gun is in great shape, basically brand new, just looking to clean some items out of my safe.

Rifle only, Scope and bipod not included.

Can send more pictures, FaceTime, etc.

Please reach out with any questions.

Excellent issued 3.5-10x40 Mk4, M110 contract scope with correct FDE KAC mount. Scope was lightly spray painted while issued, glass is excellent. Illuminated TMR reticle. Has the contract “GOV” marking.

$1600 shipped, payment via PayPal F&F, Zelle, Venmo, USPS MO.

Would consider a non illuminated 3.5-10x40 as partial trade.
SOLD

Sig kilo 6k
8x32
In good shape. One little blemish on the bottom
Comes with the chest harness, caps and original box

$600 tyd

This is Jeremy Moore, owner of Triple C Range.
It is with a hurting heart, I must announce that Triple C Range is permanently closed. This is something that has happened over the last few days.

Reason.
We were engaged in a long term lease with the landlord for a portion of the property. For those familiar with the property, this will hopefully make sense. The portion the range is located on, is solely owned by our landlord (or most of it…more on that in a minute). The front part of the property up to the last cattle guard you cross, which was located at Area A&B is part of a trust, which is why we never shot up there. The trust also controls the use of the road leading back to the range.

The area from approximately the 700 yard line and further at Area D is on the trust. It was ours and the landlord understanding we were good to have targets on that part of the property. Recently that has been clarified and we can not.
The trust has decided not to accept our proposal to lease the areas mentioned above. Without permission for commercial use of the road, we can’t get to the range and operate a business. There’s no other access other than the road.

This is the only reason we are closing. Any other reason you hear is a lie. I am being as transparent as one can.

This is a matter of oversight by some people and I don’t feel it was malicious or misleading by anyone.

To our Members:
If we debited your card monthly, we have stopped all those recurring charges.

If you paid for the year up front, we will figure out the time left on your membership and will mail a refund check for the difference. It’s going to take some time, but you can expect a check within 90 days.

I’ve thoroughly enjoyed the last several years building the range to what it was. The relationships, friendships, community and family that was created is priceless to me.

Thank you for your business and the opportunity to serve you the last few years.

I shot this girl at 527 yards with an 18" AR10 using a handloaded 195 grain Sierra Tipped Matchking. She was bedded down on an old logging flat with half a dozen other doe. One of tge heaviest doe I have killed in several years.

I watched them for about 15 minutes before she stood up to stretch. She dropped in her tracks and then slid down the hill a few yards. The exit hole is the size of a silver dollar, fantastic performance.

N-550 Powder with magnum rifle primer

Optic is a Sig Tango4 4-16×44

I am officially tagged out for the season.

I have 2 Bartlein barrel blanks up for sale.

1. 29" M24 30 cal, 9.5-8.5 gain twist - SOLD Shipped
2. 29" Heavy Varmit 22 cal, 1-8 twist - SOLD Shipped

Login to view embedded media
Announced 3 days ago. Sorta interesting, sorta not. Just figured I’d post it for general awareness.

Also, I’d love to hear some feedback on these Outdoor Legacy guys (aka Late Night Vision Show). Never quite know if I should trust them or not.

I competed in the NF ELR Steel Challenge last year with a Barrett MRAD 300nm, got hooked and am now on the hunt for a good LA chassis. I bought a Coupe De Grace LA, thought I was getting hooked up with a TACSWAP deal because I bought a Xylo LA chassis for it in a package....got it yesterday in the mail, the dummy sent me a SA, so I am now on the hunt for a chassis or stock. I'm looking to build a 300wm for practice then barrel/bolt face swap prior to going back out to NF/other ELR matches.

In a perfect world, I will second-hand find a Xylo LA again for $1100 somehow or R700 AXSR chassis less than $2600 shipped and be all sunshine and rainbows, but I am not having any luck when it comes to buying new/avoiding atrocious lead times. My goal is to get a 300wm built out by the last week of January.

Any pointers? Advice? Pros/Cons of your recommended chassis or stock?

I have researched
AWC Xylo
AI AXSR
XLR Envy Pro LA
Spuhr SICS LA
KRG C4 / Whiskey-3 / X-Ray
Accuracy Solutions F.A.S.T.
Manners MCS Stock
Foundations Stock
MPA Matrix Pro-II / Matrix

Am I missing anything else???..........Have you guys who own a CDG LA not liked any of the above?

Vortex Optics Precision Extended Cantilever Mount- 34mm 0MOA, LNWOB, Originally $350. Asking SOLD

Paypal, Zelle, Cashapp, or Venmo accepted. Shipping included unless you wish to pay extra for insurance (recommended).

Benefits of a Two stage trigger on the DD5 V5 vs the Single stage it comes with. Gun is on the way saw the hunter had a two stage. Just curious what people think of the two types of triggers! What are some of the best of both types. Shooting at range to 500 to 800 yards I'm fine with what comes with it but just want to expand my knowledge base. Shout out to Sv_Dude for giving me some great knowledge on scopes and scope mounts. Loving the knowledge I'm gaining!! I still don't know why they only put the 2 stages on the hunter but I suspect that due to intended use, however no hunting rifle I've ever had has had a 2 stage trigger.

https://geissele.com/single-stage-precision-ssp-geissele-flat-bow.html. One i saw that interested me.

New never used

$38 shipped

Selling this unused upper.

Barrel: New Noveske 10.5" 1/7 twist carbine length gas Stainless
Handguard: New Forward Controls Design 9.5" Quad Rail
Upper Receiver: Used Colt Canada Diemaco

Parting out.
$250 for the receiver.
$200 for the handguard.
$300 for the barrel. SOLD

PP, Venmo, or USPS MO preferred.

So, some time ago I was working on a new build and launched the buffer retainer and spring. I was able to find the buffer retainer but try as I may I was unable to locate the spring. I checked my bench, I checked and double checked open boxes around the bench. I don't know how long I spent on my hands and knees with flash light and magnets looking under the bench and everywhere else within reason with the room. I finally gave up and borrowed a spring from another lower parts kit to finish my build.

So tonight I'm assembling parts for another build and pulled out the lower parts kit that I borrowed the spring from. I decided to give it another try and broke out a flash light and magnet. I went back through the boxes and was ready to get down on my hands and knees and look under everything. I was at the corner of the bench where the spring went flying months earlier and looked down and what do you think I saw? You guessed it, the buffer pin spring laying in plain sight on the carpet! I couldn't believe it. Since loosing it I've worked on several projects in the same area and never saw it. Tonight it was right there, how could I have missed it.

Have you ever had a similar experience be it a spring, small roll pin or anything else?

For sale Bartlein 6mm Creedmoor barrel 1:7.5tw 26” long 5/8x24 muzzle threads MTU Contour. Chambered from ALTUS Shooting Solutions. Prefit for short action Bighorn TL3, SR3, or Origin with HLR recoil lug. Barrel has exactly 1,200 rounds on it and still shoots 1/2moa or better to the day I pulled the barrel off on 12/1/24. I ran this barrel slow for its entire life. See pictures for more details. I posted pic of the 0.49” 5shot group because that was more realistic for what the gun does on average, rather than posting the .25-.4” groups. But I have pics of those too if you want.

2945 fps ES 12fps SD 6fps Berger 109 with H1000 (secret creedmoor powder) Should have plenty of life left in it especially with slow burning powder.

Price $160 shipped TYD

Up for grabs: 2nd gen Manners PRS1T in great condition; inletted for Remington 700 clones. It has a mini chasis and adjustable length of pull installed by Manners. Color is swamp camo and has flush cups on both sides, front and rear. Comes with installed bottom metal and Area 419 arca rail up front.

$1000 shipped tyd.

Opened and played with but never fully used.

350 Shipped CONUS

AR10 Trigger Tech Diamond, Single Stage, Flat shoe. Was Mounted, Never Fired with ammo. Label and plastic screw were removed and replaced when mounted. In NEW condition. Won’t fit in a JP LRI20 when mounted as per the instructions. My loss your gain.

$200.00 shipped to your door.

PayPal FF only please.
CONUS only sales and Shipping
No International sales

Is this true?

Lightly used but not abused Aimpoint Comp M5 2 moa red dot

Has the Forward Controls Design "ATA" Adjustable Turret caps so no proprietary tool is needed (original caps included). Will include instructions and aimpoint tool as well (not pictured)

$695 shipped
NO TRADES
Discreet paypal gift or Zelle

Remington 700 (RR Prefix) chambered in .223 Remington. 16.5” threaded, braked barrel 1-9 Twist. Stock is a Magpul Hunter with OEM 700 Bottom Metal. Trigger Tech 1.5 - 4 lb adjustable trigger. Rifle is in excellent condition with very few rounds through it. Can supply more images upon request. $850.00 shipped to FFL.

I just saw this video on Instagram. I'm not saying that I like it. My curiosity has been generated. I can see some advantages and disadvantages to this set up.

I would not use this in a combat or self-defense situation because of the backlight from the screen. With animals that need dispatched at night that's a different situation.

A person can avoid a lot of eye fatigue that comes from looking through an optic with an eyepiece. With an eyepiece equipped thermal scope there is basically a small television screen an inch or two in front of your eye.

As a scanner for non-combat situations this would be great because you don't have the television close to your eye.

Then there is the fun factor of shooting suppressed handgun at night. I didn't say it was necessarily practical but just fun.

Anyway, posting it here to see what others think. Is it worth $2000?

Login to view embedded media
Login to view embedded media
Login to view embedded media

16" Stag Arms marked barrel (Manufactured by Aero) Chrome Lined Fsp Barrel. 1/7 Twist. It is new. Troy Drop in Quad Rail, Square Forge Receiver

Vortex Razor UHD 10x42 binoculars. Brand new in box. Never used.

$1100 shipped. PayPal F&F or buyer pays G&S fees.

Troy 7” Carbine Length Drop In Battle Rail. Two Piece. Mounts to G.I. Barrel Nut. Rifles are for an example of what they look like $75 Shipped

Site has a 48 hour bump rule. Do not bump before then or post will be deleted and you will be banned.

New 16" Colt Cage Code 13629
Chrome lined FSP Barrel, Troy drop in Battle Rail, New Keyhole Forge upper receiver. $325