Have a 50% off Burris Cert I won't be using. 200 tyd as you need to mail the cert in to Burris for purchase.

I have a 15.5” jp handguard that I no longer need, swapping the barrel to a shorter one. This is for small frame Ar. Comes with barrel nut wrench. Has some wear marks but in good shape overall.
Make me a fair offer
Open to trades
Ammo, sling, suppressor cover, knife, idk let me know

MDT ACC Premier,

Bought it for a project build, but going in a different direction.

in great condition with a folding stock and MDT bag rider.

$775 shipped

DUDES!!!!

It appears the retaliation has started, personally surprised they would be doing “limited “ strikes

Login to view embedded media

For sale is a very well cared for pair of 8x32 B1 Plus binos. These feature flouride HD lenses and locking diopter. These are top of the line binos with outstanding glass that rival Swaro/Leica/Zeiss etc. If you are looking for a compact high end pair for binos for hunting, these are the ones to have. The neck strap was never even worn. The only reason I am selling is these are a bit redundant for me now that I have picked up the Rangefinding 8x42 Swaro binos. You will not be disappointed, they actually rank higher than Leica/Zeiss compacts for prolonged viewing periods. If you aren't currently carrying binos in the woods with you, I guarantee you are missing out.
$850 Shipped Free.

6mm GT

• 158 pcs, 2x fired, Alpha - $80 SOLD
• 173 pcs, 1x fired, Hornady - $85 SOLD

6 Creed

• 160 pcs, 1x fired, Gunwerks (ADG) - $80 $55 $40 SOLD
• 288 pcs, 1x fired, Hornady - $145 $120 $90 SOLD

6.5 Creed

• 241 pcs, 1x fired, Hornady - $120 SOLD

300 Win Mag

• 119 pcs, 1x fired, PPU - $60 $40 SPF
• 24 pcs, 1x fired, RP - included free

I haven't sold brass in a bit. So if I'm way off on pricing, make me a reasonable offer and I'm sure we can make a deal.

Prices are SHIPPED CONUS. Insurance over $100 is on you, in the unlikely event that you want it. Otherwise, brass is yours once it is scanned at the carrier.

First "I'll take it" in the comments trumps pending offers via PM.

This is a level 7 PCU parka from Beyond Clothing. You can wear this parka as an extra layer in the cold, and still wear your gear. The parka fits over a small backpack and body armor. The parka has a longer back tail to fit over gear properly. There is a stowaway hood in the collar and full length storm flap over the zipper. The parka has two insulated zippered pockets. Also, this insulated parka stays warm even when wet.

This parka is OVERSIZED! It is meant to be worn over body armor and small backpacks. It is best worn as the outermost layer over other bulky clothing. Fits similar to 2 sizes up!

Issue Type: USGI – These are genuine US government issued items made to military specification (mil-spec).
Features:

• Oversized Clothing – This clothing item is oversized to fit over gear worn on the torso. It is recommended that you order a size smaller than you are unless you intend to wear body armor underneath.
• Wind Resistant – This is wind resistant which means that it helps break the wind and keep the wearer warmer.
• Water Resistant – It can be exposed to water for a short period of time without being damaged or saturated with water. Generally not recommended to submerge Water Resistant items unless item is made for that level of exposure.
• Lightweight Construction – Built with lightweight materials for extended use.
• Compressible – Compressible into a smaller overall size for easy transport and storage.
• Stow Away Hood – There is a stow away hood in the jackets collar for inclement weather.

$425 Shipped!!
Message if interested

Zero Compromise Optic
Model: ZC527 5-27x56 MIL WR
Reticle: MPCT 2
Serial #DA246
Item# 6000003

Zero Compromise Optic
Slimline mount 6 mil
#400-0387

This scope is in great condition and has sat in the safe more then it’s ever been used. No damage, glass is perfect with no marks or scratches. $3200 shipped to you door.

PayPal Friends and Family
Ships with tracking number

New imports arrived yesterday (only place to get this stuff is with us):

Norma 22 Hornet Brass - $74 / 100 ct
https://ravenrocksprecision.com/22-hornet-brass-updating/

Norma 9.3x62 Brass - As low as 99.9 cents each + Free Shipping
https://ravenrocksprecision.com/9-3x62-brass-updating/

We also have Norma 300 SAUM Brass in stock

Lot of exotic and hard to find brass on the website, as well as the best prices on lots of other brass like 45 ACP and 357 Mag

$4,300
Rifle all most brand new. No scratches or blemishes.
Comes with short actions customs 300 prc barrel + APA Fat bastard brake (100 rounds of factory Hornady ammo fired) Bartlein 26in desert tech contour, 8.5 twist.
1 300 prc mag
1 308 mag
MK thumb rest
DT Monopod
Desert tech TQ wrench
2 complete bolt assemblies (win mag bolt/308 bolt)
Does not include bipod.
Extremely accurate and fast barrel

Got a few good loads for lil Gun and 458 socom with 325 FTX, 300 grain TTSX, But looking to find a load for the ,
350 grain TSX hallow point with LiL Gun ...
Just throwing it out if anyone could help with a starting or mid load for tham..???
Appreciate any help and Thank you in advance...

Looking for a Minox ZP5 5-25. Was about to pull the trigger on one here when the gentleman decided not to sell. Still looking for one. Let me know what you have.

I took my 6.5 out yesterday and did some load testing with what I would call “odd” results. Components used were as follows, Nosler 140 RDF, lapua SRP brass, H4350 powder and Federal GM205M primers. I shot at 200 yards as it was a super calm morning. I lost the first 5 round group but found 3 of the shots at about 1.9 inches for a group. I have posted the results for the other 4 groups below. What I found “Odd” was how quickly it went from 1.9 inches to just over a half inch and then back out to 1.9 inches with just .6 grains of powder difference. Anyone else find this strange? I’ve loaded some more rounds up at 40.5 , 40.6 and 40.7 grains to take back out and see if the .570 group was a fluke and if there are any gains to be made.

Bought in early 2009 - ran it for a long time, but for the past couple years it's been sitting in the safe with the original prototype DTA mount.

Take it and mount off my hands for $1600 shipped CONUS and insured

Question for our experts here. The virgin cases I’ve measured are 260 rem Peterson and the bullet is Nosler ABLR 142gr. Here are the ES for each measurement.

Brass:
Length : .006”
Neck Diameter: .004”
Neck Thickness: .0035”
Weight: .8gr

Bullet:
Length: .0065”
Diameter: .0035”
Wright: 1.4gr

Are these ES measurements within acceptable tolerance? I’ll be shooting at least 600 yards and upto 1K.

After about a 10 year hiatus from the shooting world after my divorce I decided to take the plunge back into the world of Long Range shooting again. I had been shopping the Bergara rifles pretty hard but the reviews from actual shooters were all over the place so I found it hard to throw a bunch of money at one. I had also been researching the Aero Precision rifles and woke up this morning to find Midway USA had the Precision Hunter at a pretty steep discount. The rifle should be here towards the end of next week and I look forward to getting a scope mounted up and putting it through its paces. Needless to say I am pretty excited as this is my first new firearm purchase since before my divorce. I will try and post regularly on here about my experiences with this rifle.

I have a nearly new Gen 3 HD 6-36 Razor HD in EBR7D reticle. Purchased new from CS tactical. All is included, manual, tools, throw lever -batteries not installed. Mounted and shot and taken to range total of three times. Glass is perfect, body has to be 99.999% No scratches. if you can see ring marks your eyes are better than mine. Throwing in some excellent MKM scope caps.

Asking $2300 shipped

Low ballers and Nigerain princes will be ignored. I only sell premium gear that is 100% functional and in excellent condition.


Thanks for looking.

Up for sale is an sp5 that I just don't use enough.

Probably less than 600rds though it, I bought it new.
Comes with a green dot MRO on a scalarworks 1.54 mount. The claw picatinny mount is missing one screw. I've not had it affect anything, and it still holds zero.
Dakota arms mlok handguard, LFT hand stop, 11 30rd mags.
2 are "le gov restricted" marked. The rest are marked made in Germany.
Also included is a b&t folding stock.


Looking for $3,300 shipped to your FFL.
I'm not interested in splitting it up at the moment. If it doesn't sell I'll just keep and continue to have fun with it every once in awhile.

I’m looking at buying an AR-10 barrel in .308 and have more or less narrowed my options down to a 20” Krieger 1:11 M110 profile ($650, no bolt) and a 20” Shilen 1:10 full length tactical profile ($550, bolt included). I want the rifle to be a multi-purpose long range rig, not to bulky to carry around and not so light that it can’t shoot long strings accurately. I’d like to hear thoughts on these brands in general and on these two profiles. Thanks

Dudes!!!

I recently picked up an Impact 737r action. Looking forward to using it and swapping out barrels.
Which action wrench is the preferred option? I've narrowed my choices to (open to alternatives too):

• Impact Precision 737 Action Wrench: https://impactprecisionshooting.com...sion-737-action-wrench?variant=12334764556311
• SAC MODULAR ACTION WRENCH – (Model 1): https://shortactioncustoms.com/product/modular-action-wrench-kit/

My experience with SAC quality and their customer services has been very good, but an action wrench created by the Impact also had me thinking.

I have a Like New, old school Sig Sauer P226 that has had less than 100 rounds shot down the pipe. It is an Early German model that is date stamped KF 1995 and what is unusual about this Sig is that it has the Triple Serial Numbers. So I called Sig and the Customer Service/ Technical Support guy said that this Sig is a West German made Sig P226 based on the actual Serial Number and the fact that it has the Triple Serial Number markings. It must have been a Transitional gun right at the cut off between German and West German and was marked German instead of W. German.


This Sig shoots like a Dream and is Super Accurate like all the West German models. I actually have the Original Factory box and Factory 5 shot Test Target for this Sig, and 3 High Capacity magazines.

This is the closest that you are going to find to a Brand New W. German made Sig P226 that is 30 years old.


Priced at $old Shipped TYD.

*****Reduced to $old Shipped*****

***LAST CHANCE AS I WILL JUST KEEP IT***

Back Up for sale as buyer was from California and could not Legally own this. I refunded his money and it's now still available.

Has anyone had their suppressor rethreaded, or had another company’s mount adapted to be used on it? I have an older SRT 338 can and it’s threaded for my now gone EDM Windrunner with metric threads, and I’d like to get away from the adapter I currently use.

WTS: GrayBoe Renegade Stock for a Remington 700 SA, RH. It has a GrayBoe M5 DBM, 3 flush cups, KMW Loggerhead adjustable cheek piece, front pic rail. It is rattle canned OD Green, has a few love marks on it. But overall in good shape.

400$ Shipped (Venmo, Zelle, PP-F&F)