Used in a one day match, super awesome mag, works well but going a different direction so I won’t be using it. $150 shipped. Will get pics up if requested.

wonder how many people will fall for this latest one. i know it is pushed hard by all areas of the system DR offices and drug stores for 2. i assume county "health" depts and some employers (?).

Anyone else having a problem with their ARC Xylo chassis buttpad splitting and chunking. I'm on my second set with both my chassis. I replaced them both last month and both have a split in the rubber again. I'm putting them in a dragbag case to the range and back. Shooting from a bench and back in the safe. Very far from any hard use.

I can't keep shelling out $38 every month for new buttpads. Probably not a whole lot of other options for replacement either. I wanted to see if anyone else is having an issue. I honestly can't see that I'm doing something wrong here, none of my other stocks with rubber buttpads have any chunks after far more rigorous use.

I bought the first chassis in August and the second one in October so not even a lot of use. They are too soft. So far just range to bench to safe use.

I have two lots for sale. Each lot has 1+ boxes used, so any partial boxes will be free. See lots below for details. Please purchase a lot in its entirety, breaking them apart makes them less attractive to a shooter.

Both lots shoot well, I have just found better ones for my rifle and managed to purchase a few cases, so these will just go to waste. Considering how difficult this has been to find lately, I'm sure someone can make better use of it than me.

Cost is $19 per box (no markup), and I will accept PayPal, Zelle, or cash in person in the Chicagoland area. I will ship UPS ground insured, adult signature required.

SOLD
34559-505614
2 bricks minus 2 boxes - $342
+$10 shipping
Note: One brick's box was damaged during shipping. I have inspected and removed any damaged rounds from the boxes in that corner. The remaining boxes are undamaged.



SOLD
33559-503456
1 case minus 2 boxes - $1862
+$40 shipping

Just got an NF NX8 scope with a set of NF Ultralite 6 screw rings.
Whats the right way to properly install them in terms of spacing between the rings and tightening pattern and torques?

Looking for a ma30 style ball head.

I just signed up for the Coleman’s Creek PRS match March 1st. What all can you guys tell me about the facility and the area. I have a hotel in Rockingham already. Any help on what to expect stage wise, typical conditions, etc is well received.

Trijicon/Bobro lever mount

30mm

1.438 height

AC22033

$155 shipped

PP FF/Venmo

- Athlon Ares ETR 4.5-30x56 APRS6 MIL. This is Althlon’s newest reticle, and the optic was purchased only a few months ago. Like new. SOLD.

-Nightforce Unimount. 34mm diameter. 1.5” tall. 0 taper. $200.

Prices include shipping and insurance. Zelle or PP F&F. US50 only. Cross posted.

Thunderbeast bipod with Grey Ops Arca mount. Great shape $425.00 shipped

Same lot $200 shipped PayPal ff
Price drop 175$
150$

380 100gr RNFP $30 qty 500 open box
9mm 124gr RN $40 qty 500 sealed box
45 230gr RN $65 qty 500 sealed box
45 230gr RN $65 qty 500 sealed box
45 230gr RN $53 qty 365 open box
45 230gr HP $72 qty 500 open box
$250 if you take them all.

These are all new, no pulls or weird stuff. Just stuff I dont use anymore and tired of storing them. Anything in an open box was counted by hand to verify qty. Pick up in San Diego.

Rifle: Savage MK II
Ammunition: CCi Standard Velocity
Range: 56 yards
Temp: 63*F
Altitude:780’
Group Size 1.35”
Mean Radius: 0.40”

Scope: $54 CV Life 6-24x
Rings: Came with scope
Bipod: CV Life chineseium

Duno if I want to pick up a CZ 457 or just put real glass on this. For the little amount of money I have invested in this thing I’m pretty happy with it $225 rifle. $50 something dollar scope and rings, and the bipod was given to me…. Silencer is a form 1.

I kind of want to put the same scope as on my CZ 600 on it (Vortex Viper 5-25x56 ENR-7c) and get some Lapua Center-X.

I explored the 3-gun sport several years ago, but never really invested the time to become proficient and chose to focus my energy on my first passion - long range. So my Aaron Hayes custom Benelli M2 has been dormant for 5+ years now and I am cleaning out the safe. Mimimal use (<400 rounds) and is in fantastic shape. I’ve posted a few photos and can provide more if interested. $2,000 shipped to your FFL Specs and build sheet pricing when purchased in 2017 below. PM me with questions.

Benelli M2 - Race Ready - $3,255 Build sheet when purchased
Open loading port for twin and quad loading, extended lifter and shell latch tune.
Nordic mag tube, follower and barrel clamp.
Extended bolt handle and release button.
Hiviz front sight, Match saver, oversized safety.
26” Barrel
12 round mag tube
Benelli Ethos bolt assembly (light weight)
Stipple stock and forearm
Trigger spring upgrade
Includes Safariland 3-gun bag - with extension to carry the M2, Rifle and pistols.

350 rounds of new Peterson 280ai brass. All same lot, some came out of a bulk lot that were loose. I put them in boxes. All the ones in Peterson boxes are sealed.

$75 per 50 plus $10 shipping for any amount

200 SOLD 150 left

PP FF/Venmo

I have an excellent condition 40x in 22LR for sale. I was planning to use this for a repeater build but the rifle’s condition is too good to convert it. The action in this rifle is very smooth.

Stock and metal are all in excellent condition as well as the muzzle

This rifle has the matching bolt with the serial number engraved on it. Rifle is a 5 digit serial number and looks to be manufactured in 1965 based on the barrel code.

Also, this rifle has a Jewell HVR that will come with it. I do not have the original trigger.

Asking $1500 shipped

Looking for something like the short action precision holster or whatever else for belt mount. Let me know what you got collecting dust

Thanks

Loading up first test loads with the 110smk in 6 creed. What kind of jump do you guys suggest starting at? 15 thousandths?

Take off from a Seekins SP10 in the ugly OD Green battleworn Cerakote. Comes with rifle length buffer tube. No buffer or spring. Should work on an AR-15 or AR10 with the appropriate spring and buffer.

50 shipped.

Venmo gift or zelle. No PayPal.

No trades.

300wm 50rds down the tube, no modifications. Saw the woods 4 times, dropped a couple deer.

Groups well.

Great rifle very lightly used.

Comes with 1x carbon magazine

$sold

RCBS Pro2000 progressive press in good condition. Comes with the following.

3-tool heads
Multiple APS primer strips for large and small primers.
APS strip loader.
A bunch of misc spare parts.

SOLD—$500 shipped
Pay FF or buyer pays fees.

Ballistic Advantage 223 Wylde Mk12 Ops profile for the AEM5 brake and collar. 18 inches. Paint and marks from use.

Ran this barrel for about 100 rounds on a Mk12 Mod1. Went with a different setup when I decided cloning wasnt really my thing. It shot OK with factory ammo. About 1.5 MOA. I'm sure it would do better with hand loads or if you only shot 3 shot groups.


Only 75 shipped

Venmo gift or Zelle only. No PayPal.

No trades.

Yesterday I received a stripped upper I'd purchased from a well-regarded manufacturer for an SPR-ish build. While inspecting the upper, I noticed a variance in receiver wall thickness. For a normal build I wouldn't be concerned but I'm trying to squeeze as much accuracy out of this thing as possible. Is this worth bringing to the attention of the manufacturer for an exchange?

Mitutoyo 547-561s

Neck OD and wall thickness guage

Measures to 1/2 of thousandth ( 0.0005)

New condition with case

Sold shipped